How do you put christmas lights on palm trees

Wrapping Palm Trees With Christmas Lights

Regular Post

Written by webtechs

Wrapping Palm Trees With Christmas Lights


Phoenix is known for a lot of things and palm trees is one of them. If you’re interested in how to install Christmas lights for palm trees, keep reading. If you and your family would love to have that wonderful winter wonderland look in your landscape, wrapping your outdoor trees in lights is the way to go. With some planning and a few measurements it can be easy and fun to get the spirit of the holidays. Wrapping palm trees with Christmas lights is a way a lot of Phoenix valley residents get into the spirit. One of the most popular trees in the Phoenix area gets plenty of attention during the holidays. If you want to wrap your palm up in a bright and shiny coat of Christmas lights here’s how.



Before you break out the ladder you will need to take a trip to the store to buy some lights. Make sure you have everything you need before you get started so you don’t have to pause and run to the store. Leaving ladders or tools out while you are gone creates safety hazards and taking everything back in is a hassle.


One of the first things to think of is having brown cords for the light strands. They help hide the wires and make the lights more noticeable. Using LED lights cuts down on power consumption and glow without heat. They are safe and energy efficient option. If you want to add some pop you can choose to have a different color of lights at the top and in the fronds of your palm. Read the packaging as you select lights and make sure they are rated for outdoor use. Depending on the width of the trunk and height of the tree you will need more strands. You will also want to buy more if you want a tight coil of lights and a brighter look.


Make coiled balls of the light strands to make them easy to handle. You will be able to let them unwind as you go around the tree. Wrap the lights starting at the base of your palm and wind your way up the tree. If the strands of lights are slipping use the light duty staple gun to secure them in place. Make sure you are straddling the wire and not shooting through it with your staple gun. This can be a fire hazard, so take care when using your staple gun. For higher areas break out the ladders and have a friend help you continue to wind the lights up the tree. You can hand the ball of lights back and forth.


Once you get all of the lights onto the trunk you need to decide if you are going to decorate the fronds, or leaves at the top. Decorating the fronds can be a little tricky but it can really set your landscape apart. If you decided to do this you can run a look of lights down a frond and secure it in place with your twist ties. Choose to light the fronds that are closest to you for safety. Once night falls the higher fronds won’t be visible.


As tempting as it might be to simply run an extension cord from the house, make sure you use an extension cord rated for outdoor use. They are rated for use in bad weather, rain and snow. This will prevent dangerous conditions and having to run another cord or ruin light strands.


The safety of you and your tree are paramount. No one enjoys the holidays when they have fallen from a ladder, got shocked from a wire, or if the tree gets sick from too many punctures. Follow these tips to help make the most of the holiday season.

  • Don’t over staple the strands of lights. Sometimes you won’t need any staples, but if the strands are slipping try to use as few staples as possible. Trees are living things and can be hurt by going too crazy with the staple gun.
  • Use outdoor light strands and outdoor extension cords. Electricity is a useful but dangerous power source and needs to be respected. Use the right strands and cords and make sure when you do have to staple a strand down to your palm that you are not piercing the insulation on the wires.
  • Never try to hand light strands that are plugged in. Not only does it make some types of lights hot to handle but it can lead to a serious shock. This is especially true during stapling of strands.


If you find some damage or possible signs that your tree might be sick or dying while hanging your lights, give the experts a call. Phoenix Trim-A-Tree is your go to source for diagnosing what is wrong with trees, coming up with plans to save them, or helping remove trees that are beyond saving. You can trust the ISA Certified Arborists we send to look at your trees and help you with your landscape. When you’re wrapping palm trees or other trees in your landscape in lights it sets them as centerpieces in your landscape. Make sure they are up to the job with tree trimming services from Phoenix Trim-A-Tree.

CALL 480-962-0701

Illuminate Palms, Trees and Shrubs [HOW TO]

Summary: Palm tree lights can dramatically change the look of a home. When the landscape lights come on and night garden show begins.


Question: We would like to light up a palm tree with outdoor lighting and also add lighting to trees, other palm trees, and large shrubs.

Do you have any tips or ideas we should be aware of? One of the outdoor lighting ideas I’ve seen is uplighting, downlighting and adding tree spotlights with some wild results! Annette, Metairie, LA

Answer: Annette, palms, a tree, artificial palm tree, large flowering shrub, tree trunk, tree branch or evergreen often makes a natural focal point or center of attraction for many garden scenes during the day.

Plants of this type often offer many interesting points to be viewed, but they must receive light from different directions to present an interesting lighting pattern and for adequate illumination or highlighting.

When you decide to add lights for palm trees outdoors you don’t need to become a landscape architect or one of the landscape designers in the team to bring out the best in your garden, yard, and lawn.

All you need is some outdoor lighting ideas, basic landscaping skills, a willingness to experiment.

Mood lamps or bullet-type spotlight light fixtures are the basics for lighting outdoor trees and illuminate palm trees. However, when lighting palm trees, string lights and LED lighting units make lights on a palm take on a whole new look, especially the palm tree LED lights.

Solar garden lighting used in pathway lighting will not do the job. Another thing we often see is palm tree Christmas lights. Adding LED or rope lights to the trunk on a palm tree is a common decorating feature for Christmas tree lighting around shopping centers.

But, who says placing lights on a palm tree is reserved for the holiday season, special events or one time of year?

Need some inspiration? Read our article on Rope lighting ideas here.

How many strings of lights to use, and where best to locate and position them depends on the size and shape of your palm, shrub or tree, and also on the effect you want to create.

Generally speaking, locate a light in each of the following four basic positions and with perfect use of the trees or shrubs, you can create outstanding landscape ornaments for an improved outdoor space.

In addition to the lighting palm trees, flower beds, and beautiful palm tree landscape plants, you can also shine the light on other outdoor ornaments such as:

  • Patio furniture
  • Garden globes or spheres
  • Stone ornaments
  • Wind chimes
  • Timbers
  • Bird baths
  • Sculpture and Garden Statues

… for added style, improved landscape design, and overall curb appeal.

Palm Tree Lighting: Emphasize Trunk Texture and Shape

Spiked into the ground near the trunk of the palm tree and aiming almost straight up into the fronds or branches.

This light emphasizes the texture and shape of the trunk, and “points out” (with trees) the low hanging branches and fronds, creating the effect of a canopy of light overhead.

It lends sharp dramatic garden accents and works best with palms and trees that are lacy and fairly open in their structure but use it sparingly to avoid a harsh, glaring effect.

Palm Tree Light: Lighting To Emphasize Tree or Shrub Shape

Place the lighting fixture into the ground several feet away from the trunk of the lighted palm tree and aimed up into the branches at an angle of 30° to 45° degrees.

This lighting usually emphasizes the shape of the tree or shrub, lending an exotic air to those with an interesting form.

It is not as brilliant or striking to the eye as the first type of light, but can be used more freely and is particularly effective with large trees that have gnarled, twisted-looking branches and limbs.

It is also the most useful type, and more frequently used, of all-round tree and shrub lighting.

Place the palm tree lighting fixtures so that it is between the tree and your normal viewing position and so the light is being aimed away from your eyes.


Lighting To Emphasize Higher Branches, Fronds, and Leaves

To create appealing garden ornaments with the use of lighting and plants, start with fastening up among the branches of large open trees or long palm tree fronds.

Direct this light upward from a low branch or fork in the tree to light up the branches and leaves above it.

You can also accent the texture and shape of high branches where ground lights will not illuminate them effectively.

Where a large tree is to be viewed from one side only, direct the light downward at a slight angle away from the normal point of view.

This lights up the outermost branches and to create the effect of a canopy of light overhead. But use this lighting cautiously to avoid annoying glare.

Lighting To Emphasize Over All Tree or Shrub Shape

Fastened as high as possible to a nearby building or structure or even to another tree. This side lighting models the over-all shape and foliage of the denser trees and shrubs most effectively.

Place the sources of lights close to the house so that the lights will not be shining into your eyes.

It is often difficult to install this lighting on the average home grounds due to the danger of producing glare in your neighbor’s house or in the eyes of those approaching your own house.

12 ideas with instructions —

1. Arrangements in vases with garlands

Christmas decorations, real or artificial needles, Christmas tree beads, cones — place all the New Year's wealth in transparent vases and decorate with garlands of lights.


The most unusual Christmas trees you can make yourself: 15 ideas

2. Garland on a mirror

Simple, but beautiful and festive: a garland on or around a large mirror.

Photo:, urbanoutfitters. com

How to sew a pig, the symbol of 2019: 4 workshops + patterns

3. Decor from a Christmas tree garland

The board is first marked with a cord, then self-tapping screws are screwed in (a hammer and nails are also an option) and a garland is placed on them.

Photo and source:,

How to make a skirt for a Christmas tree: master class

4. Garland Photo Wall

The garland wire can also be used as a base for hanging memorable photos and postcards. Add small clothespins, making sure they don't pinch the wires.


Christmas soft toys made of felt

5. Decor for cup garland

A simple light bulb garland can be turned into an unusual one by adding "lanterns" from small cups. You can use small plastic cups, decorating them with colored paper, or you can take paper cups (if they are plain, they can be dyed).

Photo and source:,

6. Glitter star decor for the garland of lights

The bottom line is that a garland of stars cut out of shiny paper is added to the garland of light bulbs. Stars can be glued on a thread or, as in this case, assembled into a garland by sewing on a sewing machine.


7. Christmas Garland Bow Decor

A simple holiday decor idea: add fabric bows to the garland in the traditional Christmas colors of green, red, and white, or whatever colors go with the decor. your tree.

Photo and source:

8. Decor with garland and hoop

Option for true needlewomen with a rich fleet of embroidery accessories. Garlands wrap around the hoop, and the hoop itself can be positioned in different ways.


9. A garland as a decoration for a houseplant

Suddenly you forgot about this method? With a garland of lights (check that the bulbs do not heat up) you can decorate a large ficus, indoor palm tree or other plant with fairly strong branches and a trunk.


10. Garland mini hearth

For this unusual project, you need some stones, tree branches, foil, lace, PVA glue and a Christmas garland. The branches are wrapped in foil. The lace is impregnated with glue and wrapped around the branches. When the glue dries, the lace that has taken the form of branches must be carefully cut, the branches removed, and the shape of the lace branches fixed by wrapping it with a thread. So it will turn out as if already burned out translucent sticks that will glow, illuminated by a garland. It remains only to form a composition of stones, lacy branches and lights.

Photo and source:

11. Rope balls with garland lights

Balloons for this decoration are made using a balloon, rope and PVA glue. When the glue dries, the ball must be pierced, removed from the rope ball and placed inside the lights.

Photo and source:


Paper lights from Christmas garland

A cut plastic bottle is suitable for a tall cylindrical lamp, and a plastic container for a lamp lower and wider. The plafonds are made of sheets of paper: you need to cut out patterns-holes in them with a breadboard knife and glue them from the inside with tracing paper or a transparent cloth.

Photo and source:

What do we know about the history of Christmas lights?

The tradition of decorating the Christmas tree dates back hundreds of years. People have always sought to dress her up so that she is the most beautiful heroine of the holiday. A variety of toys, sugar sticks, various crafts, and golden tinsel were used. Literally everything was done to make it sparkle and shine.

People have always wanted the tree to shine with its own light. Already in the middle of the 17th century, many European houses began to use small candles to decorate the Christmas tree, which were securely attached to the Christmas tree branches. They were lit on New Year's Eve. In fact, these were the prototypes of modern garlands. Naturally, it was quite dangerous. Both the golden tinsel and the spruce itself could flare up from the fire. Because of the increased danger, they were lit for one night, but this spectacle was all the more valuable and exciting. People for the sake of creating a festive atmosphere were ready to give up even security! In order to prevent fires, some wealthy families even kept a special servant who was tirelessly on duty near the spruce. And a bucket of water next to the Christmas tree was in every house.

There is a biblical tradition about how the trees – palm, olive and spruce – wanted to congratulate the born Christ on his birth. But there was nothing to present to the baby except for its prickly needles and sticky resin - and the tree friends ridiculed her. The angel watched what was happening and took pity on the modest tree, at the wave of his hand the stars from the sky decorated the thorny branches with many bright lights, and it was to them, the cheerful lights, that the divine baby reached out.

In July 2006, in the Valley of the Kings near Luxor, archaeologists discovered a tomb containing eight sarcophagi. The remains of garlands were found in the last sarcophagus. These are ornaments with woven gold threads and flowers. It is believed that they were worn on the shoulders by members of the pharaoh's family. The bodies of royal persons were also decorated with garlands even after death. Before this discovery, garlands were seen only in ancient Egyptian drawings.

Flower garlands discovered in the eighth sarcophagus

The authorship of the first electric garland is controversial, it is attributed to the American Edward Johnson, assistant to Thomas Edison, and also to the Englishman Ralph Morris. In 1882, Edward Jones connected together 80 small electric light bulbs, which were painted in different colors: red, blue and white. He invited journalists to the presentation of his invention, but, alas, they did not show due attention to this event. Only one journalist responded to the invitation, and even he did not appreciate Johnson's work. Therefore, Edward's invention went unnoticed.

Ralph Morris was a telephone operator. The idea of ​​an electric garland came to his mind in 1895. Regularly observing the chains of electric light bulbs in telephone switchboards, Morris came up with the idea to hang strings of light bulbs on a Christmas tree. His idea was quickly taken up.

In 1895, the first electric Christmas garland was made in the USA, which decorated the fir tree in front of the White House. The next appearance of outdoor Christmas trees with electric garlands was in Finland in 1906 year.

The real breakthrough in the use of electric lights as decoration did not occur until 1917, when fifteen-year-old Albert Sadakka, after reading about the tragic fire of Christmas tree candles in New York, decided to create a truly safe and affordable garland himself. He closed the chain of light bulbs into a single grid, thus creating what in the modern concept is an electric garland. A few years later, this invention brought Albert a fortune.

In Soviet Russia, the first garlands began to be produced only in 1938, because during the First World War, in 1916, the Holy Synod considered the tree a “German custom” and condemned its use. A few years after the October Revolution, in 1924, the authorities banned Christmas, considering it a "priestly holiday." Only at the end of 1935, people were allowed to officially celebrate the New Year with decorated Christmas trees. Only by 1938 in Russia, finally, did the mass production of electric garlands begin.

Of course, the samples of electric garlands of the 30s were radically different from those existing today. These were ordinary car light bulbs, soldered to one wire, painted with varnishes and paints. Despite their primitiveness, the garlands of the Moscow Electric Lamp Plant were popular. This is quite understandable, since in the difficult war years there was no time for excesses, and they carried comfort and warmth.

At the end of the 1950s, garlands - toys appeared: a filament was fixed inside a figure made of thick glass, and the figure itself was inserted into a base, which was fixed on a wire.

In the 60s, mass production of electric garlands began. At the same time, the fastening of garlands with clothespins appeared.

The beginning of the space age was also reflected in the theme of New Year's garlands: asteroids, satellites, rockets, flying saucers - the main topics of that time.

In the 70s, garlands in the form of lanterns of various types and shapes came into fashion. The familiar simple garlands were still the decoration of Christmas trees, but they somewhat changed their appearance.

Over time, the electric garland has undergone a number of changes in form and principles of operation. With the development of electronics, control units arose that set various programs for turning on or off individual luminous elements.

Currently, there are several types of electric garlands. There are designs when light bulbs are located on a wire one after another, there is a so-called "light curtain" or "light network". There are designs when the light bulbs are hidden inside a flexible cord that can protect against exposure and surface contact with heated elements. These are duralight garlands, they are used to highlight the contours of a building or create advertising signs.

But the most significant change in the design of electric garlands was the transition to the use of LEDs. LED and fiber optic garlands do not pose any threat in terms of fire safety and electrical safety.

Learn more