How much does a maple tree weigh


Table of Contents

If you have ever looked at a tree and wondered “How much does that tree weigh?” You wouldn’t be the first or the last person to have that thought. Trees are graceful and elegant works of nature and they sure can carry a lot of weight. How much does a tree weigh exactly that is the question. Unfortunately, you cannot put a tree on a scale to find out the answer. Trees are extremely diverse and one species can have a totally different weight to another. Trying to figure out the weight of a tree can be a mentally challenging task but it is not an impossible one! There are many methods that can be used to determine a tree’s weight. I am sure you have many questions and I hope that this article will help you settle some of them.

Different trees have different weights. The weight of a tree depends on the species and type of tree as each tree has a different volume and density. There are several methods that can be used to calculate the weight of a tree, but to give you an example of how much trees can weigh, A 50-foot tall pine tree with a diameter of 12 inches (30cm) can weigh up to 0. 9 tons or 1,800lbs (816kg).

How to calculate the weight of a tree?

There are two common methods that one can use to calculate the weight of a tree. The first and most accurate method is to use an algorithm that is designed for the very purpose of calculating a tree’s weight.

The second method is to estimate the volume and the density of a tree which you can then use to estimate the weight. This method is simpler and even you can try it out!

  • First, measure the diameter of the tree at breast height (around 5 feet or 152cm above the ground).
  • Secondly, measure or estimate the height of the tree.
  • Third, estimate the volume of the tree.
  • Fourth, find a reference that estimates the density of your tree.
  • Fifth, multiply the volume by the density (be sure that they are both in the same units).
  • This will give you the estimated weight of a tree without its leaves.

There are two common methods used to calculate the weight of a tree. The first is using an algorithm. The second is using estimates of a tree’s volume and density to estimate its weight. The second method is easier and can be done by anyone with proper references.

What is the heaviest tree in the world?

General Sherman is a giant sequoia tree situated in the Sequoia National Park of Tulare County, California. You must be wondering how much this tree weighs to bear the title of being the heaviest in a world with trillions of trees.

Here’s your answer; General Sherman is estimated to weigh an amazing 2.7 million lbs (1.9 million KG )! General Sherman received its title based on its total trunk volume which, to this date, no other tree has been discovered to pass.

The heaviest tree in the world according to total trunk volume is the General Sherman tree located in Tulare County, California. It weighs an estimated 2.7 million lbs or 1.9 million kgs.

How many pine trees make a ton?

If you think a ton is a lot of weight then you may be surprised to find out that a 50-foot tall pine tree with a diameter of 12 inches (30cm) can weigh up to 1,800lbs (816kg). 12-inch diameter is not a lot for a pine tree, so imagine what bigger pines can weigh.

This may come as a shocker to people who only picture pine trees like Christmas decorations but those little trees can grow up to dozens of feet. Imagine how much weight comes with that height!

You might wonder how many pines you need to make a ton of firewood? Well, there are many different species of pine trees but if you were to consider the average pine tree, you may need only two.

There are many different species of pine trees. The average mature pine tree may have a weight of 4400 lbs (2000 kg). So it is safe to say that 1/4th of the average pine tree would weigh 1000 lbs.

How much does a 100-foot pine tree weigh?

You have already learned that the average pine tree can carry a tremendous amount of weight. Imagine how much weight a 100-foot tall pine tree carries!

Well, due to there being several species of pine, the answer may vary as we need to consider the volume and density of the tree. There aren’t many species that grow up to become 100-foot tall. It is safe to say that a single 100-foot pine tree with a diameter of 30 inches (76cm) could weigh up to 18,500lbs (8,391kg)! It’s no wonder these trees are so resilient and indestructible!

There are many species of pine but only a few can grow up to become 100-feet tall. A 100-foot pine tree with a 30 inch (76cm) diameter can weigh up to 18,500lbs or 8,391kg.

How much does a dead tree weigh?

A dead tree is a tree that has already died but usually remains standing for a long time after its death. It will shed its leaves and may gradually drop its branches over a period of time. A dead tree that remains standing will weigh almost the same as it did when it was alive (excluding the weight of its leaves).

The main difference is that dead trees do not absorb water from the Earth. The decreased water content would reduce their weight from what it was when they were alive.

As trees have different capacities of water retention, the decrease in weight may be fast for some trees and slower for others.

For example, A Red Oak tree weighs around 60lbs per cubic foot (961kg per cubic meter) when it is alive. When it is dead, the same tree can weigh 45lbs per cubic foot (720kg per cubic meter).

How much does a 25-foot telephone pole weigh?

When you think about it, telephone poles are pretty much industrial trees, aren’t they? They are also the only tall, tree-like structure we are likely to see near trees. You have probably used them as a standard measure to guess the height of a tree. We know that most of them are more or less 25 feet in height but do you know how much they weigh? They are much heavier than they look with the average 25-foot telephone pole weighing from 500lbs to 750lbs (227kg to 340kg)!

The weight of a telephone pole will depend on its material and height. The average 25-foot telephone pole can have a weight in the range of 500lbs to 750lbs (227kg to 340kg).

How much weight do leaves add to a tree?

Leaves are more complicated than they seem. The leaves of one tree can be significantly different from the leaves of another. A tree will also weigh differently when its leaves are dry compared to when they are wet. You may be familiar with an oak tree so let’s take that as an example. The average mature oak tree may have around 200,000 leaves with 360 dry leaves weighing one pound (0.45kg). That would mean that a mature oak tree has leaves weighing an estimated total of 550lbs or 250kg!

Different leaves carry different weights. Different trees have different amounts of leaves on them. The average mature oak tree may have 550lbs or 250kg of its total weight in leaves.

Frequently Asked Questions:

This article is to answer the most common curiosities about the weight of a tree but we know you may still have a few burning questions! We are going to answer a few of the most recurrent questions below and we hope that you will find yours among them.

What is the lightest tree in the world?

On the other end of the spectrum from the General Sherman, we have the Balsa tree. Though there is currently no official record for the lightest tree in the world, the Balsa tree is renowned for its light wood. In fact, the Balsa wood is considered to be the lightest and softest wood that is commercially sold.

What is the weight of a tree log?

The weight of the tree log depends on its volume and density. The average estimated weight for a one-foot log with a 10-inch diameter is 29lbs (13kg) for a beech tree, 25lbs (11kg) for a maple tree, 40lbs (18kg) for an oak tree, 33lbs (15kg) for a pecan tree, and 20lbs (9kg) for a white pine tree.

Which tree has the heaviest wood?

The Black Ironwood is the heaviest commercially sold wood and weighs an average of 84.5lbs per cubic foot or 1,355kg per cubic meter.

Which tree has the heaviest leaves?

The largest and heaviest leaves belong to a species of the Raffia Palm called the Raphia Regalis. A single leaf can span up to 80 feet (24 meters) in length and 10 feet (3 meters) in width!


Trees are magnificent orgamisms and are among the most complex living things to study. As simple as they may be in appearance, they can be challenging to understand. We hope that this article taught you something new about the weight of trees. Perhaps it even encouraged you to try out your own tree-weighing activities!


I am the guy behind I grew up on a homestead and I am here to share the knowledge I have and things I learn while living in the countryside.

How Much Does A Tree Weigh?

Trees hold a majesty that nothing else in nature seems to hold. If you have a love or curiosity for trees, you may be wondering how much a tree weighs. We've researched this question thoroughly and have some important information about the weight of trees for you. 

Living trees can weigh anywhere from about 1000 pounds to about 2 million pounds. This is a very broad range because tree weight is influenced by several different factors. Some of these factors include:

  • Diameter
  • Height
  • Hardwood or Softwood
  • Volume
  • Density
  • Leaves or no leaves

Now you have a range of what trees can weigh and what factors can affect their weight, but you may want to know how to calculate tree weight. We elaborate on that and more in this post! Keep reading to learn how to determine tree weight, what the heaviest tree is, which tree has the thickest bark, and which tree has the thickest trunk.

How Do You Calculate the Weight of a Tree?

To calculate the weight of a tree, you will need to use a specific formula. However, let's talk about the factors that influence tree weight before discussing the formula to calculate tree weight. 


Tree diameter directly correlates with tree weight. This means that when tree diameter increases, tree weight also increases. Therefore, trees with smaller diameters weigh less, and trees with larger diameters weigh more. For example, a hardwood tree with a 12 inch diameter weighs about 1500 pounds, whereas a hardwood tree with a 26 inch diameter weighs about 8400 pounds. 

If you're looking at two trees that are considerably different in size, you can tell which one has the larger diameter. You may even be able to estimate the diameter of a tree by looking at it. However, if want or need to know the exact diameter of a tree in order to determine weight, there's a way to find it.

To find the diameter of a tree, you must first determine the circumference at breast height. The circumference is the full curve length of the tree, and breast height is about 55 inches about ground. So, to find the circumference at breast height, you simply measure the curve length of a tree at about 55 inches above the ground. Obviously, to measure the tree, you will need a tape measurer.  

Click here to see a tape measurer designed for finding the circumference of objects on Amazon.

After finding the circumference at breast height, you can calculate the diameter at breast height (DBH) by dividing the circumference by pi. 


Tree height and tree weight directly affect each other, just like tree diameter and tree weight do. Thus, taller trees generally weigh more, and shorter trees generally weigh less. For example, an 80 foot tall hardwood tree weighs about 20,000 pounds, whereas a 50 foot tall pine tree weighs about 2,000 pounds. 

If you want to see how tall a tree is, it may be difficult to actually measure it. Because of this, it may be best to estimate the height of the tree you're analyzing. You can make good estimates by consulting the internet or a book for the height of that specific tree. 

Click here to find a book that includes the heights of trees on Amazon.

Hardwood or Softwood

Whether a tree is hardwood or softwood significantly affects its weight. Hardwood trees weigh more than softwood trees do. For example, beech trees are hardwood trees, and they weigh about 45 pounds per cubic foot, whereas cypress trees are softwood trees and weigh about 32 pounds per cubic foot. 


As the volume of a tree increases, the weight of a tree also increases. Because of this, volume significantly impacts weight. In addition to being a factor that influences tree weight, volume is a key factor in the formula for calculating tree weight.

Finding the volume of a tree is even more difficult than finding the height. There is virtually no way that you will be able calculate the volume without any mistakes. So, in order to determine a good volume estimate, it is best to search for the information in a book or contact an expert, such as a forester. 


As with diameter, height, and volume, density also directly affects tree weight. Trees with larger densities generally weigh more. Like volume, density is an important component in the formula for calculating a tree. So, it is necessary to find the density if you want to figure out how much a tree weighs. 

You can search the internet or a book for density estimates of specific trees. 

Leaves or No Leaves

Whether or not a tree has leaves greatly influences a tree's weight. The presence of leaves contributes to a tree's weight, making it heavier, whereas the absence of leaves makes it lighter. For example, magnolia trees have a good amount of leaves, so the weight of these leaves will contribute greatly to the overall weight of the tree. 

However, there are some trees that have little to no leaves, like tamarisk trees. Tamarisk trees are generally lighter than trees with a lot of leaves because they have a very small amount of leaves, which means they have less that contributes to their overall weight. 

Like volume and density, the weight of leaves is an important part of the formula for calculating tree weight. There are two ways that you can find the weight of leaves.

The first way is to collect a small sample of leaves from the specific tree you are examining. Next, count the number of leaves in this small sample. Then, determine the total number of leaves on the tree. You can do this by searching the internet or a book for the average number of leaves the specific tree has. Finally, multiply the number of leaves in the sample by the total number of leaves on the tree, which should give you the weight of the leaves.

The other way that you could find the weight of leaves is to simply search for the answer on the internet or in a book. This may be easier than the first method. 

Formula for Calculating Tree Weight

Finally, now that we've talked about all of the factors that affect a tree's weight, let's delve into the formula for calculating tree weight. 

The formula for calculating the weight of a tree is fairly simple. It is as follows: (volume x density) + leaf weight. So, in order to calculate a tree's weight, you must multiple its volume by its density, and then add its leaf weight to this number.  

What is the Heaviest Tree?

The world's heaviest tree is the giant sequoia. The heaviest giant sequoia is nicknamed "General Sherman," and it is located in Sequoia National Park. It weighs about 2.7 million pounds, an astonishing weight for a tree! Giant sequoias grow to extreme heights and widths. On average, sequoias grow to about 250 feet tall and have diameters of 30 feet wide. 

What Tree has the Thickest Bark?

In addition to being the heaviest trees, giant sequoias also have the thickest bark of any known tree. On average, at the base of the tree, the outer layer of the bark exceeds two feet in thickness. 

Which Tree has a Thick Trunk?

Baobab trees, which are native to Africa, India, and Australia, have very thick trunks that give them a unique look. A baobab tree's trunk can have a diameter of 29 feet and a circumference of 82 feet. 

However, the baobab tree is not the tree with the thickest trunk; the tree that takes this title is the Mexican cypress. The Mexican cypress has a diameter of about 38 feet, and it has a circumference of about 119 feet. 

In Closing 

There is a broad range for what trees can weigh, and a variety of factors impact the weight of a tree. The formula for calculating tree weight involves multiplying tree volume by tree density, and then adding leaf weight. With this formula, you should be able to determine how heavy any tree is if you ever need to do so. 

Before you go, check out our other articles:

19 Gorgeous Large Flowering Trees

11 Beautiful Trees Under 10 Feet

404. Sorry, this page was not found.

Styrofoam equipment
Fixed formwork
Equipment for the production of roofing felt
Styrofoam shape cutting equipment
Styrofoam cutting machines
Equipment for the production of SIP panels
SIP panels - price. Buy SIP panels
Cinder Block Vibropress
Equipment for the production of polystyrene concrete (foam concrete)
Equipment for the production of sandwich panels
Equipment for the production of foam rubber
Convectors Accord M
Precast concrete equipment
Forced concrete mixer (concrete mixer)
Molds for FBS
Foundation blocks. FBS blocks (price).
Manhole Ring Molds
Concrete rings for a well (price)
Forms for steps made of concrete LS
Jumper molds
Border molds
Molds for road slabs
Vibrating plate
Vibrating table
Vibration plate
Small business
Tire mini sawmills
Equipment for the production of beer

Paint production equipment

Paint recipes (paint technology)
Concrete bucket
Mortar container
Site map (directions business development)

Sorry, this page was not found. You can use the site search or select a section from the menu.

Phone: +7 473 256-46-33, +7 920 407-62-26, e-mail: [email protected]

Forms for FBS
Road plate molds
Concrete step molds
Jumper molds
Manhole Ring Molds
Vibration plate

Density of wood of various moisture content

One of the most important factors in the organization of timber transportation is the density of wood. It is an important indicator when calculating the cost of transportation and selection of a timber carrier.

The weight of a tree can be specific and volumetric. Specific gravity - the mass per unit volume of a tree without taking into account the species, moisture and other factors - is 1540 kg / m 3 . Volumetric weight - the mass of a unit volume of a tree, taking into account moisture and species. Based on the volumetric weight, the density of the tree can be determined. The density of trees of different species is different. Also, the density of a tree of one species is very variable, depending on the geographical location and type of forest.

As wood moisture increases, the density increases. For example, the density of pine at a moisture content of 15% is 0.51 t / m 3 , and at a moisture content of 70% - 0.72 t / m 3 . According to the degree of humidity, the tree is divided: absolutely dry (humidity - 0%, only in laboratory conditions), room-dry (humidity up to 10%), air-dry (humidity - 15-20%), freshly cut (humidity 50-100%) , wet (over 100%, when storing wood in water).

Learn more