How to draw a realistic tree easy

How To Draw A Tree

‘How to draw a tree?’ is a question that I get asked often, online an offline, so I decided to make this tutorial here.  I made 7 drawings of various trees with step by step instructions.  I hope you all find it helpful!

***This post contains affiliate links.***

For me drawing trees is all about branches and the crown, and fining a balance that you are happy with.  There are many amazing artists, books and tutorials out there all about drawing trees.  For example, THIS BOOK is very good, and my kids and I enjoyed it in the past.

This tutorial is my take on drawing trees.  For these drawings I used a regular sketching pencil, though the same principal applies to other mediums as well.  I also adjusted all the sketches in Gimp 2 so that they are more visible, so there will be a slight variation between the photos.

Alright, here is tree number one.  I call this one “Tree # 1”.  🙂

How To Draw A Tree: Tree # 1

I start with a line and the general shape that I would like the crown to be.

Then I add a few lines to indicate the main branches.

Make the trunk thicker.  It is thick towards the bottom and the roots, and narrows closer to a point toward the top.

The same thing with the branches. They are thicker toward the base and narrower towards the tip.  Easy-peasy.

Now each one of the main branches gets a few branches of their own, but smaller and added a squiggle on the bottom to indicate a bit of grass.

Even more smaller branches splitting off from the bigger ones.  I also pick an spot where the sunshine is coming from.  I also shade the trunk a bit, using long straight lines.

Putting my pencil sideways, I shade in the area in the crown where the leaves are.  I am going in a sort of irregular pattern of peaks and troughs.

I finish shading the crown area.

I keep working on the crown, now by adding some layers, and outlines. I also erased the line that was giving me the initial crown shape idea.   When shading, keep in mind where the sun is coming from: areas facing the sun should be lighter then the areas facing away from it.

And keep working on the crown.  Just doodling away until you feel your tree crown is complete.

I decided that the tree shouldn’t just hang in the air, so I gave it more grass, and shaded in the background.

Even more shadows in and around the tree.

Then I went all out and decided I am going to use my eraser and add some sun rays coming out of the corner.

Even further, I got eraser happy and made more rays coming out through the tree and on the ground below it.  Tree # 1 is all done!!!

Tree # 2:  The Seascape Tree.

As before, I drew the line and the crown, but this tree is being bent by the wind, so the tree will be bending down a bit.

I add the hill, and make the trunk thicker.

I extend the trunk shape up.  As before, it’s thicker towards the bottom, and comes to a point on top.

Add some main branches.  Because the wind is blowing, many of the branches are leaning to the right.

Keep adding branches, so far all leaning to the right.

Here is more branches.  Here is the thing about the branches.  The thick, main branches are stronger, so they will not be as affected by the wind, but the smaller branches will all point in the direction of the wind.

I shade the trunk a bit and added some roots to the hill.

Alright, now leaves are squiggly lines drawn with the side of my pencil.  Some of them are flying off, so more small squiggles.  I also add a horizon line: where the water meets the sky and some grass on the hill.

I added some clouds, shaded the water, drew a sand line, and some tall grass on the hill.  The tall grass is also leaning in the winds direction.  I also darkened some of the leaves a bit.

Tree # 3: Pine Tree:

As before, I start with a trunk.

I add a small triangular shape on top with straight lines all moving to the top.

Add more triangular lines on top of one another.

Keep adding the branches with needles to about half way, and then sketch a few empty branches.  Thicken the trunk.  Add a shadow to the tree.

Tree # 4: Umbrella Tree

This tree was especially fun to draw.  I started to draw it by drawing the ovals for the leaf parts.  I decided on four, but if you want more, that would be quite awesome too! Then I added some squiggly lines coming down to the same area for the tree trunk.

I added more lines to create thicker trunk branches, added more branches going out to the ‘umbrellas’ and added a few empty branches as well.

I added more details to the trunk, made more squiggly branches, and added some shading to the ‘umbrella’ portions.

A bit of grass, and some textures on the ‘umbrellas’, also make the ‘umbrella’ textures thicker on the bottom and thinner on top.

Tree # 5: The Bushy Tree:

This tree is more of a bush.   All the branches are coming out from the bottom, and growing to about the same size.  I start with five main branches.

Make the branches thicker, and add some more small branches.

Even more small branches, making the bush thicker and thicker.

With the side of my pencil I added some shadow to where the leaves are going to be.

I added some more detailed leaves, but they could also be berries, or flowers, or what ever else you would like.

Too often kids (and adults) draw trees which ends in a stump, and has a semi round crown on top of it.  Here I start by doing that, and then work on it some more.

I erased the stump line and gave the tree a few branches, but instead of doing the way I did the above trees, I ended them half way and will cover them up with leaves.

Define the leaf areas in the foreground, and add some branches coming up behind them, also a few roots.

Shade the trunk a bit, and then start shading the leaves that are towards the back.

Do a bit more shading, and add some grass.

Tree # 7: The First Tree.

This was the first tree I actually drew, and I wasn’t too thrilled about it, but here it is anyway.  I start as before, a line for the trunk, and a circular shape for the crown.

Lines for the few main branches.

Make the trunk thicker, and give it some roots.

Make the main branches thicker as well.

Split off some branches from the main branches.

Add even more branches.

Shade the trunk with straight lines. Decide on where the sun will be and add shadows to the areas facing away from the sun.

If you’re feeling adventurous, you could even add shadows that the branches are casting on the rest of the tree.  Actually, at this point, I really liked what this tree was coming out like, and maybe I should have kept it as a winter tree…

…but no, I had to go and add squiggly lines to indicate leaves.

I kept working on the leaves, occasionally using my eraser to add highlights, until I was somewhat happy with it.

One more little thing I noticed is that I needed to give myself extra space.  I would usually run out of space for the tree much quicker then I thought I would.

There you go! My trees are all done.  Now go and practice some trees of your own! Play around, and draw some amazing trees!

How to Draw (Realistic) Trees with Pen & Ink

Updated: 19 Aug 2022

In this guide, I will demonstrate how I simplify the drawing process, and I hope that by the end of it you will be able to draw your favorite tree.

In order to draw realistic trees with pen and ink, it is important to pay attention to accuracy of the form (structure), and to learn how to create the illusion of brightness values and transitions with pens.


When looking at ANY tree, examine its basic shapes.

It is a good practice to draw its simple shapes first:

Once you understand these simple shapes, you can use your artistic license and your knowledge to recreate it.

There is no point drawing every single leaf as you see it (when using a reference image as a guide).


Banana Tree

For trees with big leaves, like a banana tree, first draw a study of the leaves from different angles.

For a realistic result, make sure there is no symmetry, and that each leaf is unique.

You can use markers; they work well with pens.

Olive Tree Trunk

Look at some reference images, or actual trees, before drawing the tree trunk.

First, draw outlines to create the form (structure).


Draw thin and gentle outlines, so they are not bold.

Next, add some guidelines and basic details.

Last step is texture drawing.

Focus mainly on brightness values, while drawing marks with shape and direction like the reference image.

Olive tree trunks

Keep in mind:

Each olive tree trunk has its own "personality", but all olive trees share common basic shapes.

How to Draw Leaves

Drawing leaves can be challenging. Understanding their structure, and breaking the drawing process into steps, will produce a satisfying and realistic result.

Each tree leaf is in different direction, has a different degree of foreshortening, and is overlapping other leaves.

Simply put, the form and texture of leaves is abstract and messy.

To draw that, you need to be sketchy and loose with your marks, and to avoid any pattern!

Next step is to pay attention to brightness values. That is how you create the illusion of volume. Meaning, three-dimensional and not flat.

To create that illusion, scribble more lines for darker values, and fewer lines for brighter values:

In addition, pay attention to leaves size, depending on the tree type, and how distant it is from the observer.

For big leaves, sketch big marks, and vice versa:

While the treetop is messy, at its edges you can add some indication of leaves type and size.

Olive tree

After understanding the characteristics of a specific tree (olive tree in this case), it is quite easy to draw it from imagination.

If some terms like foreshortening and overlapping are new to you, read my guide on how to draw with a sense of depth. It covers 15 methods to add depth to your drawing or painting.

Good to know:

Mostly, I use a pen with nib size 0.1. It is small enough to create fine details.

Photos & Contrast

When I am taking photos of a tree, I do it from several angles.

If possible, I circle the tree to get a photo from every angle.

I select a photo that has high contrast as my reference image.

Contrast between highlights and shadows is crucial for a drawing to stand out, and to have presence.

Not enough contrast leads to a flat drawing with no depth. Too much contrast looks cartoonish.

Olive tree

Pine Trees


Before diving into complex texturing and rendering, if you are a beginner, you might want to practice the next step.

Draw any random tree shape, sketch some random marks to fill it up, and then draw more sketchy marks in one side and at the bottom of the tree (to create a darker value for the shadow area).

This should not take more than 5 minutes! The advanced texture you will see after this example is just a matter of many hours of practice to refine the texture marks.

Pine trees are relatively easy to draw from imagination.

They have very small, needle-like leaves.

I like to start by gently drawing the form, and then fill it with small, random marks, that are NOT in any specific direction or with reoccurring shape.

Last step is to draw more marks for darker areas, depending on the direction of light you choose.

Pine trees come in many types and shapes.

Looking at a reference image can help at the beginning, just as a guide to draw the form, and to pay attention to dark and light areas.

Other than that, try to be loose and sketchy with your marks.

When drawing a close-up view, you can indicate the needle-like leaves at the edges of the tree.

Pine tree

Snowy Pine Tree

A pen has only one brightness value. Therefore, you have to use different techniques to create the illusion of transitions in brightness values.

One technique (or style) is to use hatching. Hatching means drawing parallel lines.

By drawing lines with different degree of spacing between them (or with different line width), you can create an illusion of different brightness values.

Another method is to use cross-hatching.

Cross-hatching means drawing sets of parallel lines in different direction. By adding more sets of cross-hatching, you can create the illusion of darker values.

You can use ANY pen for drawing. I prefer artist-grade technical pens (also fineliners). They create lines with fixed width, and their ink is made of pigments, which is very durable and lightfast.

For the snow part, you can leave it empty ("white"), or you can use hatching in some areas.

In this example, I used some hatching, and some marks with very light gray marker.

Snowy Pine tree

If you want to know more about markers, visit my markers review for artists.

Christmas Tree

A Christmas tree is just another pine tree, but with decorations.

To add some baubles, first draw their shape, and then try different types of hatching, cross-hatching, and stippling.

Stippling is a drawing technique that uses dots. The more dots you add in one area, the darker it looks.

You can add other decorations to your Christmas tree.

It is best to first sketch some test drawings on a different paper, to see what works, before adding them to your drawing.

To add boxes in perspective, you should be familiar with linear perspective drawing, and learn to draw from imagination.


If you find it hard to draw a tree with a pen, you can always start with a pencil.

When you reach a satisfying result, you can go over it with a pen, and gently erase the pencil marks.

Christmas tree

Drawing with White Pens

When drawing with white pens, pay attention to the same drawing fundamentals.

While with black pens you draw more lines for darker areas, with white pens you should draw more lines for light/bright areas.

These pens are most effective on black (or dark) paper, and for highlights.

Keep in mind:

White pens are designed for covering.

Drawing with a black pen (which has ink) over white areas (made by a white pen), may ruin the pen's nib, because it will be covered with the white substance (therefore its ink will not flow smoothly).

Aspen & Birch Trees

Aspen & birch tree trunks are easy to draw when doing it in steps.

Draw the form first:

Then, add some basic details:

Finally, draw some brightness values, and texture:

Birch & aspen tree trunks

You can use (light) gray markers for coloring:


Overlapping means an object that partially covers another object.

When you see an object that overlaps another object, you assume that this object is in front of the object it covers.

Overlapping is one of the most powerful ways to create the illusion of depth on a flat paper.

Overlapping trees

Because you cannot erase pen marks, it is best to draw foreground objects first!

If you want to draw a house in front of a tree, draw the house first:

Do the same for tree branches.

First, draw the branch that overlaps a tree, then the tree trunk.

For trees that have a complex structure, with many branches, you can use a pencil to draw the basic shapes.

When you are happy with the result, you can draw over it with a pen, and gently erase the pencil marks.

Birch trees


Transitions are part of drawing (and painting) fundamentals. They exist everywhere!

For example, different areas of a flat plane have different relationships with any light source, reflections, and shadows.

Therefore, always look for transitions (in brightness values) for your drawing to look realistic and natural.

First, look for light and dark areas.

Then, look for transitions within each area. Transitions from dark to light, from light to lighter, and from dark to darker.

Oak tree

By drawing with NO transitions (and using hard edges), you can create something that looks unnatural, as opposed to something realistic with transitions.

The same way a gardener trims bushes and trees, you can use your artistic license to create something that looks artificial or man-made:

Artistic license means to use your knowledge and experience.

Once you understand how to draw leaves, you can draw anything with leaves texture. Objects, figures, vehicles, or even a refrigerator:

Good to know:

Transitions are not limited to brightness values. Transitions exist in colors, texture, edges, and temperature (transition from warm colors to cool colors).

If you are struggling with realistic drawing, you might want to read my realistic pencil-drawing guide. It covers the 4 important fundamentals (accuracy of the form, brightness values, edges, and transitions).

Weeping Willow

A weeping willow tree is a bit tricky to draw.

Its leaves are easy to draw at an up-close look. As you get farther away, you can see long clusters of leaves with no single leaf shape.

You can start by drawing an outline for the tree structure. Do it gently.

Then, one way is to draw the treetop (crown), section by section.

Alternatively, like in this example, you can draw the dark values first.

Something to consider:

As mentioned above, a pen has one brightness value (usually black, though other colors exist, more on that later).

By drawing gently and swiftly, with a sharp angle, you can produce lines that are less defined, and therefore with a lighter value.

The last step is to add the light values.

Pay attention to brightness values, transitions, and texture. Be abstract with your marks, yet with a sense of direction.

Weeping Willow

How to Draw Huge Trees

For some large trees, like Ficus, I like to use a large paper sheet (A3 in this case).

If the tree is too complex to draw, you can draw a grid (softly with a pencil), to divide the paper into smaller sections (and use the same grid for your reference image).

Keep in mind:

Drawing on a large paper with a pen (or a pencil) is time-consuming. For a tree like this, it can easily take more than 20 hours to complete.

Ficus tree

Sometimes, huge drawings may not look so big on a small screen.

You can give it context by adding background trees (from imagination in this case).

Background drawing

Something to consider:

You should use the rules of atmospheric perspective when drawing backgrounds (landscape).

When objects are far away, there are more atmosphere particles (that scatter light) between them and the observer.

For far away objects, use less contrast and fewer details. In addition, background layers become lighter, and have soft edges.

Adding Background

Trees are beautiful on their own. Sometimes though, you may want to add a background.

Drawing grass is a simple and easy solution for background.

Start by drawing some short lines. The lines in the front should be a bit bolder and longer.

Add more lines; some can be longer (mostly in the foreground).

Avoid any pattern, and try to be abstract with your marks.

With a tree (eucalyptus in this case), grass (as background) adds depth.

There is no actual depth in a drawing, your paper sheet is flat. The higher you draw on your paper (until the horizon), the farther away it looks.

By drawing cast shadow by the tree, you can add a sense of space to your drawing.

To draw cast shadow, add more marks (lines) for that area, to create the illusion of dark value.

Adding Plants

Another option is to add some plants. For example, cattail plant (Typha).


Natural plants and trees have an abstract shape. Make sure you do not draw them too round and uniform.

When drawing long leaves, pay attention to cast shadows:

After test-drawing the plant's parts, draw some loose outlines.

For realistic results, draw each flower or leaf with different size, shape, and direction (but, keep in mind the tree or plant characteristics).

Additionally, pay attention to overlapping.

Then, add some brightness values and cast shadows.


Now you can combine grass and plants to draw a landscape.

Landscape pen drawing

And, paint it with markers.

Coloring with markers

Size & Context

The way to define the size of objects is by placing them near other familiar objects.

Although a worm is usually quite small, by drawing it big compared to known objects like trees, it is possible to create a giant monstrous worm.

Giant worm

On the other hand, you might want to draw a small tree, like a bonsai tree.

In this case, you need context.

Drawing a tree in a plant pot can help, but sometimes even large trees are sold inside pots.

Drawing familiar surroundings, like a room, can help a lot in defining the bonsai's size.

Bonsai tree

Colored Pens

While the main color for technical pens is black, many brands offer other color options.

Colored technical pens

I prefer black ink, but occasionally I like to mix it up with colors.

Acacia tree


To draw logs, timber, or tree trunks, start by drawing the outlines gently.

Pay attention to foreshortening, and add some basic details.

Lastly, decide where to place the light source, and draw a gradual transition in brightness values with sketchy marks.


A cylindrical object has a transition in brightness values, from dark to light.

When using a black pen, draw more lines for darker areas.

Another option is to draw less defined lines (swiftly at an angle), and add more lines for darker values.

Colored pens:

Unlike black pens, colored pens come in different levels of opacity.

When drawing more in the same area, the pen creates a darkness value. Sometimes you can let the pen ink dry, and then draw over it again.


Cast shadows usually have soft edges (see below how the cast shadow from the rope has a soft edge).

When you scribble the wood texture, you want to have some dents and holes in some areas.

Draw these dents with a hard edge on their darker part, and a soft edge when the transition ends (the light side of the dent, or hole).

For a more realistic rendering, with more details, draw big.

How to Draw Trees with Pencils

When drawing with pens, you create the illusion of different brightness values by drawing different amounts of lines.

With pencils, you can actually draw different brightness values.

While with pens you draw lines, with pencils draw stains or smudge the surface, as if you are drawing with a brush.

I usually draw the structure first.

For a tall tree, I draw from top to bottom, so not to smudge the graphite particles.

If the tree is wide, I draw from left to right (because I am right-handed).

Make sure there is enough contrast between dark and light areas, and that you are abstract with your marks.

When drawing landscapes, especially with roads, use linear perspective to draw it accurately.

You can visit my guide on linear perspective for beginners.

Mixed Media

The same way you can use a pen with markers, you can use other mediums.

In the next example, I used a pen for drawing a tree, and pencils for drawing the Polaroid photo.

Colored Pencils

To draw with colored pencils, you should have a basic understanding on how to mix colors for painting.

For this example, I mixed blue and yellow (to create green).

The key for mixing colors with colored pencils, is to work with many layers (blue, then yellow, then blue, then yellow, and so on).

The more layers you add, the more pigments are on the drawing surface, and it is easier for them to mix.

Do not to press too hard when adding layers.


While there are no lines in nature, pens can only create lines!

Drawing is creating an illusion. The world is three-dimensional, but your paper-sheet is two-dimensional.

To create this illusion, pay attention to brightness values, edges, and transitions (among other things).

A pen has only one brightness value, so, unlike other drawing mediums (graphite, charcoal, pastel...), you have to create the illusion of different brightness values and transitions (in brightness values).

When drawing trees, focus on accuracy of the form, and on brightness values.

Make sure you have enough contrast between highlights and shadows, for the drawing to be noticeable.

Trees are a part of many drawings, especially landscape, seascape, and cityscape.

Homemade parasol, product design drawing

After you master drawing the form and brightness values, details (texture) make all the difference.

Here is my realistic texture-drawing guide.

If you liked this article, you might like my flower pen-drawing guide too.

For my recommended pens that I used in this guide, visit my review for fine-liners and technical pens for drawing.

How to draw a tree: 35 options for every taste

May 20, 2021LikbezDo it yourself

Create simple images with markers, paints, pencils and pastels.



How to draw a tree with a black marker or felt-tip pen

Frame: DrawinGeek / YouTube

What you need

  • Paper;
  • black marker or felt pen.

How to Draw

Draw a zigzag horizontal line to represent grass. Draw two vertical curved lines. From above, between the parts, make several arcs. Get a trunk with branches.

Frame: DrawinGeek / YouTube

Above the arcs, draw two cloud-like shapes. Behind the figures, make three more, but larger. This is a crown.

Frame: DrawinGeek / YouTube

Show the texture of the bark on the trunk. To do this, draw a lot of curved lines. Also mark several arcs nested inside each other.

Frame: DrawinGeek / YouTube

The full version of the master class can be viewed here:

Other options

An easy way for beginners:

Here they show how to portray cherries:

If you want to draw a realistic tree:

Even a child will cope with this tree:

An unusual tree pattern with roots:

if you are going to draw a cartoon tree with eyes:

This tutorial shows how to draw two palm trees:

A fun drawing that is easy to repeat:

How to draw a tree with colored markers or felt-tip pens

Frame: Like ART / YouTube

What you need

  • Paper;
  • colored markers or markers;
  • black liner (optional).

How to Draw

Draw two vertical curved lines with a black marker pen or marker. This is a stem. Mark the branches from above with segments. You can use a liner at this stage if you wish.

Frame: Like ART / YouTube

Draw a rounded crown with an uneven outline. Mark wavy segments above the branches.

Frame: Like ART / YouTube

Color the barrel with a light brown marker or felt pen. To show the shadows and texture of the bark, you need a shade slightly darker than the previous one.

Frame: Like ART / YouTube

Make large dark green spots on the crown, leaving some free space. Fill in the empty areas with a light green color.

Frame: Like ART / YouTube

Outline the grass under the tree. With a black liner or felt-tip pen, draw a series of wavy segments on the crown. Emphasize the shadows on the trunk and branches.

Frame: Like ART / YouTube

Details - in the video:

What other options are there

A simple drawing of an apple tree:

Master class for those who want to depict an autumn tree:

9008 902 paints Frame: PENCILS AND PAINTS / YouTube

What you need

  • Paper;
  • simple pencil;
  • wide brush;
  • gouache;
  • palette;
  • water jar;
  • fine brush.

How to draw

Draw a long line to show the horizon. Mark the trunk with two vertical lines. It should be narrower at the top than at the bottom.


Draw a V-shaped branch with sharp tips. Add small branches of different sizes. Draw the roots going into the ground - they resemble curved triangles.


On a palette, mix white gouache with a small amount of blue paint. Paint over the background with a wide brush, being careful not to touch the tree. Add white and pale yellow spots to the leaf. So the drawing will look more interesting.


Using a thin brush, cover the wood with brown paint. Then add some black to it and apply the resulting color to the branches on the left. Make light brown and yellow strokes on the trunk and roots.


Use broad strokes to mark the green leaves. Try not to overlap the entire branches: then the image will look more realistic. Mix gouache with some yellow and white paint. This shade should also be placed on the crown.


Draw thin brown branches on top of the leaves. Make the space below the horizon line light green. Use a more saturated shade to draw individual blades of grass. Outline a black shadow on the trunk on the right.


The full version of the lesson with artist's comments can be viewed here:

What other options are there

A method for those who want to draw a landscape with a tree:

Master class on drawing a realistic tree with detailed comments by the artist:

Here they show how to portray a birch with watercolors:

And here - how to designate flowers with simple spray:

simple drawing of flowering wood with gouache gouache :

Draw a tree in spring, summer, autumn and winter at the same time:

Here they show how to draw a tree using pointillism technique:

Landscape with several realistic trees:

Even a child can do this drawing:

How to draw a tree with crayons

Frame: Rio Art Club / YouTube


  • colored pencils.
  • How to Draw

    Mark two vertical curved lines with a brown pencil. Get a palm tree trunk. Make horizontal strokes along the entire length of the part. This is how you define the texture of the bark.

    Frame: Rio Art Club / YouTube

    Shade the trunk so that it is darker on the left than on the right. Draw a few short lines at the base. Draw green fruits of different sizes. They are oval in shape.

    Frame: Rio Art Club / YouTube

    Color in the fruits. To set the direction of growth of the branches, outline curved lines. On the sides of each, make a lot of short dark green strokes. Place them as close to each other as possible. Add a light green tint to the leaves.

    Frame: Rio Art Club / YouTube

    Use green and black lines to represent the ground below the picture. So it will not seem that the palm tree is floating in the air.

    Shot: Rio Art Club / YouTube

    See the entire painting process here:

    What other options are there

    View of the redwoods from below:

    A fascinating drawing that is not easy to repeat:

    Here the artist shows how to draw a realistic tree in 40 minutes:

    Try drawing a baobab with pencils on black paper:

    How to draw a tree with pastels

    Frame: Tiku Art / YouTube

    What you need

    • Paper;
    • simple pencil;
    • oil pastel.

    How to draw

    With a simple pencil, mark a horizontal line at the bottom of the sheet. From it, release two broken vertical lines upwards. Get a tree trunk.

    Frame: Tiku Art / YouTube

    Draw four massive branches. They are widened at the base, and sharper closer to the tips. In the example, the parts have creases. This makes the drawing realistic. Add small branches directed in different directions.

    Frame: Tiku Art / YouTube

    Shade the trunk and branches on the right with brown pastel - this will show the shadow. Beige chalk is suitable for the left side of the picture.

    Frame: Tiku Art / YouTube

    Make dark green spots on the branches, consisting of many small dots. Add a light shade around the edges.

    Frame: Tiku Art / YouTube

    To indicate the texture of the bark, draw small lines on the trunk and branches with a simple pencil. If desired, you can draw several arcs nested inside each other. Sketch the grass at the base of the tree.

    Frame: Tiku Art / YouTube

    Nuances - in the video:

    What other options are there

    Another easy way to draw a realistic tree:

    Dry pastel is required for this image:

    This instruction will help to portray baobabs:

    Master class on drawing autumn wood with oil pastel:

    This drawing will be easily repeated by experienced artists:

    Read also 🧐 9000

  • How to draw spaces: 19 of the option: 19 of the option , which everyone can repeat
  • How to draw snowdrops: 17 options for every taste
  • 14 ways to draw a beautiful cone
  • How to draw an elephant for a child and an adult
  • How to draw an owl: 21 easy ways
  • How to draw a tree?

    From a very early age, first mothers, then kindergarten teachers, teachers in drawing lessons at school put love for nature into the soul of a child. One of the ways to appreciate the beauty around us is the fine arts.

    Children are very fond of drawing in all sorts of ways, and wildlife is the best topic for this. Let's draw trees with a pencil and paints.

    Master class for beginners: how to draw a beautiful tree with a pencil

    1. Try to draw a simple birch yourself. Not everyone will succeed the first time, and even more so for a child, but with the help of certain stages displayed in our article, even a novice artist can quickly draw a completely realistic tree. And if the mother finds time to develop the creative abilities of her baby, and draws with the child, there will be no problems at all. First of all, we draw the base - the trunk of an arbitrary shape.
    2. Now we give it volume by drawing an almost parallel line, fading to nothing at the very top.
    3. Now we draw, again arbitrarily, the so-called "tree skeleton" the ends of the branches should lean down at the birch. Unnecessary lines can now be easily removed with an eraser.
    4. Now draw thin falling branches and color the trunk.
    5. Our tree is ready for coloring with colored pencils - we make small green leaves on the branches and our masterpiece is ready!

    How to draw a winter tree?

    It is quite difficult for a person inexperienced in fine arts to show changes in nature, and especially winter. But if you are not too strict and critical in relation to the children's drawing, then you may be surprised to find that the kids are much easier about this. The smallest do well with white snowflakes from gouache dots that cover bare branches.

    The older the baby gets, the more difficult the technique of making a winter landscape. There is no need to strictly indicate exactly how to draw winter, developing the talent of the artist.

    How to draw a tree in autumn?

    Things are much simpler with the autumn theme. Bright red-yellow shades elevate fantasy to an unprecedented level. And various drawing techniques allow you to get beautiful autumn landscapes.

    Someone likes watercolor, someone likes working with gouache - mixing paints to get the right shade is a very exciting and exciting thing. You can even draw an autumn tree with a toothbrush, spraying different shades of paint alternately with a bristle onto a sheet of paper with an already drawn trunk.

    How to draw a tree with paints step by step?

    1. All available paints, water container, mixing palette and brushes will be required. On a standard sheet of paper, using a pencil, draw a sketch of the future tree. This will be the trunk and main branches.
    2. With neat strokes, we outline the top of the tree and branches, which should be slightly smaller than the bottom ones. Branches can be more or less, as you like.
    3. Draw a projection of the future crown and visually highlight the grass.
    4. So, now it's the turn of colors. Take blue and white and mix a little. The resulting mass should be diluted with water to a pale blue hue. We paint the sky with a wide brush and let the paint dry well.
    5. We carry out the same mixing with green paint. It should not turn out to be too intense, because on top of it, after drying, we will still draw dark green foliage. Don't forget the weed too.
    6. With light brown paint, diluted with water to the desired consistency, paint the trunk and thick branches and again let the pattern dry.
    7. Now let's start with the leaves. We will draw them in dark green using dot technology - put a bold dot in the right place and tear off the brush from the sheet. This is done almost continuously, creating the effect of a dense crown. We draw blades of grass with the same paint as the leaves, but not exactly the same, but with a slightly different slope.
    8. That's it - the tree is ready!

    Related articles:

    How to draw a spider?

    Continuing our line of drawing master classes, we invite you to draw a spider today. Many children, remembering him as a character in many children's fairy tales and rhymes, will gladly agree to draw him on paper, and with our step-by-step instructions, this will be very easy to do!

    How to draw a family tree?

    Today people spend less and less time studying their genealogy, their ancestors. This is, of course, due to the modern pace of life. We simply do not have time to do many things that are so valuable to us. It's good that teachers at school are doing this, often giving our children tasks on the topic of preparing a family tree, studying their family and their roots.

    How to draw a Christmas tree?

    Kids love everything new, and this is manifested in everything, including drawing.

    Learn more

    31 Suttle St, Durango, CO 81303    Phone: (970) 259-3489 ext. 3
    Site Map