How to grow a tree faster

What Makes Trees Grow Faster?

Tall, bushy, luxurious trees are the centerpieces of every landscape. Driving past a local park or a well-maintained yard with the perfect tall tree could make anyone jealous. Everyone goes in search of the perfect trees to complement their yards, but the trees unfortunately never come fully grown.

Everyone wants to know what can make trees grow faster so their landscape can be the influence of the neighborhood. While an instant growth serum hasn’t been made yet, we can take a look at things you can do at home to help those trees grow at their maximum yearly capacity. As a bonus, we’ll also look at a couple of trees that are known for growing fast in general.

Know Your Zone

Weather and temperature variations can have a large impact on a tree’s ability to grow. Making sure the trees in your yard are going to grow successfully depends on what plant hardiness zone you live in. Not all tree species can survive in every zone and knowing your zone before purchasing trees will play a role in their growth and longevity.

A zone is designated around the average annual minimum winter temperature, and each zone has a range of 10 degrees Fahrenheit. There are even half-zones with a 5-degree temperature variation. As an example, Zone 1 ranges from -60 to -50 degrees F, while Zone 1a ranges from -60 to -55, and Zone 1b is -55 to -50 degrees F. Knowing your plant hardiness zone, and better yet half-zone, is the first step to ensuring the trees you choose will grow healthy and quickly.


While it may sound like common sense, trees need water to grow. Providing your trees with adequate amounts of water can make a significant difference in helping them reach full size at maturity. We recommend using a slow irrigation system to give your tree roots the right amount of deep watering without drowning them. The trick is to ensure the soil is damp but not soggy and has short periods of dryness in-between watering to allow enough oxygen to penetrate. Without enough water, trees become stunted, and this will have the opposite effect desired. If you’re unsure how much water your trees need, reach out and talk to professionals, like those at Mr. Tree.


You’ve heard it before and you’ll hear it again, fertilizer will help plants and trees grow. It will help them grow faster, taller, fuller, and healthier. Fertilizer helps incorporate essential nutrients into the soil to support growth and photosynthesis. Fertilizers contain varying amounts of nitrogen, phosphorus, and potassium and are like a multivitamin for your trees.

Phosphorus, in particular, helps plants develop chlorophyll, allowing them to turn solar energy into chemical energy and promoting growth. Testing your soil composition will help you determine any deficiencies in these nutrients so you can obtain the ideal fertilizer for your yard. Fertilizer also helps retain water and promotes airflow for tree roots. If you want help, Mr. Tree’s trained arborists can assist you with testing your soil and determining what it needs.


A layer of mulch around your tree can provide many benefits that will support its growth. Mulch helps trees retain water for adequate moisture and provides increased nutrients to the soil. It will also help keep away grass and weeds, which cause competition for the needed nutrients in the soil.

An important thing to remember when using mulch is to restrict the layer to only one to two inches thick. This will ensure the root system isn’t smothered. There should also be 3 to 10 inches of space between the tree trunk and the beginning of the mulch, depending on tree size and age, so as not to cause decay or tree rot.


Protecting your trees as they grow is also important. You can help shield your new trees with tree shelters—hard, plastic, cylindrical tubes that fit around the trunks of young trees—to keep them from getting damaged by squirrels, deer, pets, lawnmowers, and other dangers.

These tree shelters are beneficial for the first five or so years of growth or until a tree’s trunk diameter is greater than the tree shelter. The tubes also provide an added greenhouse-like effect by trapping in warmth and moisture to promote faster growth. Additionally, an injured tree will grow slower, which means by protecting the tree from damage, it will be able to focus on growing rather than healing.

Well-Known Fast-Growing Trees

Along with taking steps to help your trees grow faster, you can also choose trees that grow quickly in general. While there are downsides to fast-growing trees—they don’t live as long and tend to be less sturdy—they’ll give you the look you want in your yard sooner. Fast-growing trees will average yearly growth of 25 inches or more a year. In comparison, slow growth is less than 12 inches a year and average growth is 13 to 24 inches a year.

Popular fast-growing trees include hybrid poplars, weeping willows, red maples, and pin oak trees. Hybrid poplars, in particular, can grow up to five to eight inches per year, and weeping willows grow three to eight inches each year. If you’re specifically looking for taller trees, here are a few more options. Don’t forget that all of these trees will still need the same care and attention as slow-growing trees. We recommend having a variety of slow- and fast-growth trees in your landscape for balance.

Large, full trees are a great addition to any home. They can increase the property value for your home while providing plenty of shade on hot summer days. While we’ve looked at different factors regarding what makes trees grow faster, there are other variables that can have an effect on the growth and health of a tree. We recommend reaching out to trained arborists for more information or a possible consultation on your yard. Developing a strong relationship with your tree service early on is a good idea, as your trees will continue to need care, including trimming and maintenance, if you want them to stay healthy for years to come.

How to Make Trees Grow Faster (8 Ways)

Table of Contents

If you have been planning to start a garden or a small forest in your backyard you don’t want to wait for decades before the tree reaches decent height. Obviously, the growth rates differ but there are ways to boost the growth of trees by following some simple steps.

  • Choose the right species of the tree (Ideally one that is fast-growing).
  • Get the soil tested and provide fertilizers that provide nutrients that are missing from the soil.
  • Remove any small plants and weeds around the tree.
  • Make sure the tree is getting an appropriate amount of water, sunlight, and other nutrients.
  • Make a protective covering around the tree.
  • Prune the tree from time to time.
  • Try providing some root stimulators such as Auxin.
  • Make sure you are not over-fertilizing or over-watering the soil as it can cause the tree to become weak and have diseases.


One thing I have noticed all over the world is that each culture has its own way of optimizing agriculture and botany. We have to remember that the roots of human civilization are embedded in agriculture. A lot of these cultural practices date back thousands of years. So, we cannot completely disregard them as hocus science.

But with the evolution of science, there are more sophisticated methods to specifically nurture the tree and the soil to optimize its growth. This is especially the case in developed countries. There has been a marriage of science and agriculture.


When discussing the methods of speeding up tree growth, let’s start from the very first step. That is, choosing the right tree. This method only concerns those people who are planning to plant a tree from scratch and not looking after an already growing tree.

The tree you are going to choose will basically involve these factors:

  • the climate you are living in
  • the type of soil
  • the look you want
  • and the growth rate

There might be other points but these are the broad ones. If you really want one particular tree and you don’t really care about the growth rate and other factors then the decision is much easier for you.

For others, you should first go to a nearby nursery or a professional and get to know your options. They will have the best knowledge in terms of what trees will actually grow in your area and which will not. They can further tell you which trees will grow faster and which ones will grow slower. You can further cross-reference this with a quick google search.

Once you know your options, weigh the pros and cons and finally make the decision.

After this first step, the second step is to assess the land. This needs to be done before the tree is planted. This step involves taking a note of the quality of the soil, the bedrock, the average rainfall which the land gets, and what are the dry areas.

A very important aspect of planting a tree or speeding up the process of growing is getting your soil tested. Once you know which tree is going to be planted and what the current nutrient build-up of the soil is, you can work towards adding additional things to the soil to make it optimum for that specific species. One thing you should keep in mind while planting a tree is to not have any small plants or grass around it. This increases the competition for water and nutrients.

After getting the soil tested you will know whether to add any fertilizer or not. Remember that over-fertilization will make the tree grow faster from the top but similar growth will not be shown by the roots. This means that the tree will end up having a weak root system.


When you are about to plant the tree, what your first steps are, is going to be very important. First, make sure that the hole you are digging is at least twice as deep and wide enough for the root ball. Remove any grass and small plants surrounding the tree and start putting the soil back in the ground after placing the tree. At this time some places like the Arbor Day Foundation suggests adding 50% of the original soil and potting soil for the rest.

They state that a mixture of potting soil and original ground soil is optimum for the initial growth phase of the tree. In case your soil test came out to be good, I don’t think you need to do this step.


Add a bit of mulch surrounding the tree and to make sure that no grass or plant will end up growing in the mulch. You can go for a product like Roundup. It basically acts as a weed killer. Before going for any weed killer, make sure it won’t harm your tree as a lot of the weed and grass killers should not be used near trees.

The next step is to water the tree. During the beginning, you will have to water more to nourish the growth. But as the tree gets older you might only have to water once or twice a week. your watering schedule will also be determined by the season you are in. if you live in a dry region then you will have to artificially water more and vice versa.

Don’t overdo this though in the beginning as too much water will choke the soil and therefore the roots.

I would suggest that you take some steps to protect the tree during the initial phases. You will need to protect it from wild animals, sometimes even your pets, and environmental conditions like strong winds and floods. You don’t have to do a lot, just build a small fence surrounding the tree, you can build it with barbed wires or simply wood.

Keep getting your soil tested every year and accordingly adjust if you are putting any fertilizer to the soil.

The last step is pruning. I will get into this later on in the article. But understand that pruning promotes the healthy growth of the tree. It also helps in making the tree look better. If your tree is fruit-bearing then pruning at the right time becomes much more important.


This part may not be practical as of right now, but I found this very interesting so do give it a read. There was a paper published in Current Biology by a group of scientists who studied the genetics of poplar trees.

Cambium is the living tissue underneath the outer bark that handles the overall transport and command of the entire tree. There was no proper research on the genetic component behind this growth as of now. This study basically showed how to tap the command center of the tree and tweak some of the factors.

There are two genes, PXY and CLE, these genes are responsible for growth above the ground. scientists figured out how to make some changes in these genes to increase the rate of growth. Now, you might be thinking that the growth rate must have increased by 10-20%, but to everyone’s surprise, the rate of growth doubled.

Although this study was only conducted on poplar trees and it is not known if the same genes are present in other species as well. The practical implications of this finding can be huge, this includes industries, the environment, and basically anything related to timber and wood.

There are three stages of growing a tree that you need to address. During the pre-planting stage, make sure you are choosing the right species of the tree you want to plant. Secondly, the most important part is to get the soil tested for any deficiencies, after this make sure the planting area is free from any small plants and weeds. After planting, add some mulch to the surrounding area and make a well for water to collect. You can even make an enclosure around the young tree to protect it from wild animals and environmental conditions.


If you went through the previous section of the article you know that watering is one of the most essential factors which affects tree growth. This sounds very simple but in reality, it’s not so easy. You have to keep in mind a lot of things while watering any tree. This includes the overall rainfall, conditions of the soil, temperature, age of the tree, type of tree, etc. Let’s take a look at these factors one by one.

Let’s start with the first stage of a tree’s life, that is, when they are young. Consider this, as a rule of thumb younger trees need more water. After all, these are their formative years. Generally, you will need to water them 4-5 days a week. If you are living in drier and hotter regions then you might need to water them more.

One very important thing that the Texas AgriLife Extension Service based in Houston suggests is to give enough water to younger trees to maximize growth. They also suggest that similar lines shouldn’t be followed with older trees, especially if going through a period of drought. You should only provide supplemental water to sustain their life, not for the tree to be able to grow a large canopy. If the tree ends having a large canopy the soil, climate, and rainfall during the normal rainy season wouldn’t be able to support such growth.


I would suggest doing the screwdriver test with soil especially when dealing with younger trees. When you poke a screwdriver into the soil and you can easily push past 8 inches then the soil has sufficient water. But when there is some resistance by 6 inches it is time to water again.

This method is not feasible with established trees because of course, you can’t find a large enough screwdriver. What you can do is, whenever the soil starts feeling or looking really dry and if it is the dry season, it might be time to water the trees.


Again the methods will slightly differ during different growth stages. With younger plants, you should make a small bowl-like shape around the base of the tree. Water it enough till there is some water collected in the ditch. This will make sure that water is reaching the roots.

When dealing with larger and more established trees I would suggest going for a method which provides water slowly but directly to the soil near the roots. Some of these methods include soaker hoses, drip irrigation, although with the latter it can take a long time to fully water a big tree.

Soak up the entire area under the canopy and a little beyond it as well. Add some mulch to the soil as well. this will help lock up some moisture if you are living in hotter climates.

The amount of water you need to give depends on the climate, soil type, and age of the tree. Obviously, you will need to water more in hotter and drier regions. When a tree is freshly planted, you need to water it about 2-3 times a day but as the tree gets older you will need to provide it with less and less water.


This topic is one of the most misunderstood among amateur farmers and botanists. They think of fertilizers as steroids for bodybuilders. A lot of people believe that if you keep adding fertilizers, it is better for the growth and quality of the tree. They don’t know that over-fertilization can ruin the soil and even make it toxic. They also don’t think about which fertilizer to use with which soil and in what conditions. Let’s take a brief look at the Dos and Don’ts of fertilizing your trees.


You don’t want to add fertilizer when your trees don’t even need it. To understand this first get your soil tested. You will get a lot of information from this, including the PH level of the soil, which nutrients are present in the soil, and which are not. You will need fertilizer only if there is some deficiency in the soil.

The next step is to check the growth of the plant. Check the color and size of the leaves, also check for the annual growth of branches or twigs. If any of these factors seem a little off, first you should try to find the problem. Not always is the tree deficient, these things can be a result of insects, damage to the tree, soil being too compressed, or any other diseases.

If the soil test came out to be perfect then it is possible that these problems are a result of something else and not a nutrient deficiency.

The next factor is the age of the tree. Fertilizers are more effective when applied at a younger age as the plant or tree requires a further boost to grow at an optimum rate. This is also the age when you can boost its growth by artificially supplying further nutrients.


Some of the most common nutrients which are a part of most fertilizers are Nitrogen, Potassium, Calcium, Magnesium, and Sulphur, there are also some amounts of Iron and Zinc. You will get to know which specific nutrients to add to the soil after the test and checking the health of your tree.


The most common fertilizers to use for all-around needs are the 16-4-8, 12-6-6, and 12-4-8. But you shouldn’t go for these if the phosphorus and potassium levels are okay during the soil test. Common fertilizers can be divided into further broad categories with each having distinct uses.

Broadly there are fast and slow-release fertilizers. The name is pretty much self-explanatory, the fast release type will quickly dissolve into the soil and will start acting at a much faster rate. On the other hand, slow-release types will usually have nitrogen which is covered by Sulphur or urea-formaldehyde, this makes it dissolve slowly into the soil.

Usually, fast release types are cheaper but they do have a couple of disadvantages. If you have a young plant, they can cause ‘burns’ which happens when too much fertilizer is added to the soil at once. If you have sloping land or sandy soil, fast release types have a tendency to run off without getting properly absorbed by the plant. Sometimes heavy rain can also make them seep deep into the soil outside the reach of the roots.

Slow release are generally more suitable for younger plants and they have the added benefit of not poisoning the water.

Another category is the natural fertilizers, these include compost, mulch, cow manure, sewage sludge. They are much better for the environment but they take a lot of time to be absorbed by the plants. They also have less concentration of nutrients which means you will have to get a lot of it to truly affect the tree. They do improve the soil texture in the long run. And they also have the advantage of having iron and zinc which is difficult to be found in artificial fertilizers.

Whether your tree needs fertilizers or not depends on what they are missing out on from the soil. Get your soil tested to find out which nutrients to provide. You have options between fast acting which is cheaper but can cause tree burns and water contamination. Or slow acting which is expensive but generally better for younger trees and the soil. You have a further choice between artificial and natural. With the latter having some nutrients which are missing from artificial ones but you will need a lot of it to fulfil the tree’s needs.


There are a lot of reasons why you should be careful while adding fertilizers to the soil. Too much of it can cause issues such as weaker growth and be more prone to environmental conditions such as cold, insects, and diseases. The branches and twigs tend to break easily and the tree even produces rank. You should have a rough idea about the amount to use.


The amount to use is closely linked to the amount of nitrogen present in the fertilizer. So first check the amount of nitrogen per pound or ounce in your product before moving forward. The widely accepted norm is to use between 2 and 4 pounds of nitrogen for trees and shrubs for every 1,000 square feet of root spread every year.

The amount of area covered by the root is about 1.5 times the crown spread. If you are dealing with younger trees then you can add a bit more as they have more needs.

In case your tree is growing in a lawn and you have been regularly fertilizing the grass, then you shouldn’t need additional fertilizers. The roots will be able to absorb a lot of the fertilizer already added to the grass. Only add something if you see any problems in the growth of the tree. Also, check if the product being used in the lawn is harmful to the tree or not.


A tree with disproportionate growth in the upper part having weaker roots is highly susceptible to environmental factors such as wind and rain. You need to make sure that the root system is going through the same level of growth as that of the canopy. Let’s take a look at some of the ways to ensure this.

The first step is the same as that for the canopy, make sure that the tree is receiving ample amounts of nutrients. Especially Nitrogen, Phosphorus, and Potassium. Phosphorus helps in building a healthy root system while Potassium is responsible for making the cell walls thicker. This will protect the tree from environmental stresses.

There are some additional hormones that you can provide to the tree to promote stronger and faster growth for the roots. One of such hormones is Auxin. It is responsible for regulating a lot of processes such as earlier root formation and increasing the speed of root growth.

I would also recommend using microbial fertilizers for promoting root growth. They serve two functions, the first being protecting the roots from insects, infections, and pathogens. The other function is breaking down nutrients so that they can be easily absorbed by the roots.

Make sure the tree is receiving adequate amounts of nutrients notably Nitrogen, Phosphorus, and Potassium. In addition to this, you can add hormones such as Auxin and Microbial biofertilizers to further strengthen and stimulate root growth.


For people new to taking care of trees, cutting off some part of the tree to promote growth seems like an alien concept. It doesn’t logically make sense to do, but wait until you find out the benefits of pruning your trees.

  • To begin with, it helps in increasing the strength of the roots. The more branches your tree has and the larger they get, they start putting pressure on the trunk and roots of the tree. This increases the chances of trees being toppled over. Cutting down some parts of the trees can promote better root growth and stop them from shifting too much beneath the ground.
  • Pruning supports fruit growth in edible trees. This is because when you cut down branches that are dead or not active, the energy which was being delivered to them is diverted to more productive parts of the tree. This increases the fruiting ability of a tree.
  • When you eliminate branches that are dead or have some sort of an infection or pest problem, in a way you are saving the entire tree from being affected. Removing dead or infected branches will also lead to new ones being born.
  • You need to make sure that you are pruning off branches that may cause damage to each other because of their positions. You can also consider pruning off old branches which are not productive anymore. Pruning is also done to increase the overall canopy height. But don’t ever prune more than 33% of a tree.

To sum it all up, pruning can be very beneficial as it protects the tree from diseases and pests spreading from one branch to another. It also promoted fruit growth, healthier roots and helps a tree become more sturdy.


Everyone wants to increase the growth of their tree. While making efforts to promote growth you don’t want to make a fatal mistake that can cause the tree to be damaged. That’s why before you do anything you should have all the basics cleared. I will try to address some of the most common questions related to the topic, hope it helps.


Usually, you don’t need to add fertilizers more than once or twice a year. Even this should be done after getting your soil tested to see if it actually needs anything or not.


This decision is very subjective to the type of tree and condition it is in. Sometimes it needs to be done every year while in some cases it can be done every couple of years. If it is a fruiting tree, I would suggest doing it before the fruiting season.


If the soil feels clogged by water and it becomes too dense then you should start cutting down on the amount of water.


To sum it all up, some of the best ways to increase the rate of growth of your tree is to provide them with specific nutrients that they need and are deficient in. Along with this pruning from time to time and adding hormones like Auxin helps promote root growth as well. Make sure the tree is receiving enough sunlight and water especially during dry weather. There are different steps that you should follow in all three stages of planting a tree, which are Pre, During, and Post planting.


I am the guy behind I grew up on a homestead and I am here to share the knowledge I have and things I learn while living in the countryside.

Acceleration formula: Russian scientists figured out how to grow trees faster

Forest Technologies

July 15, 2020

Russian scientists have come up with a technique that allows you to speed up the process of growing coniferous trees many times over. Researchers at Tomsk Polytechnic University (TPU) were able to germinate seeds in just 22 days, not six months, as is usually the case. In addition, the seedlings took only two months in the laboratory to reach the level of approximately two-year-old plants. Scientists hope that the technique they have developed will allow faster restoration of cut down and burned forests.

The polytechnics managed to achieve such stunning results with the help of ultraviolet light, a special soil mixture, filigree settings for lighting and plant nutrition. “We took seeds with a high germination rate from the Altai nursery, treated them with an ultraviolet excilamp, which was provided to us by colleagues from the Institute of High Current Electronics of the Siberian Branch of the Russian Academy of Sciences, and revealed the optimal duration of exposure. Then the seeds were planted in a special peat mixture,” says Sergey Polisadov, engineer of the Materials Science Department at TPU.

UV radiation is needed in order to disinfect the seeds, as well as to “wake them up”. Another key to the rapid growth of plants - a special peat mixture - is obtained by mixing activated peat obtained by extraction with earth, baking powder and other additives. In addition, the seeds are created "optimal conditions with the help of a lighting system, watering, fertilizing with chlorella and peat extract." This technique allows not only to accelerate the growth of trees, but also to drastically reduce the number of non-germinated seeds. If in a normal situation two out of ten sprouts on average, then nine out of ten sprouted in the TPU laboratory.

The technique is still being tested on the first experimental batch of pine and cedar seedlings. However, there is already demand for development. The first customer is the Kuzbass Fuel Company. After the seedlings have undergone hardening, that is, preparation for "relocation" from laboratory conditions to the natural environment, the plants can be planted on a dump.

“A trilateral agreement has also been signed between TPU, the Tomsk Agricultural Institute and the Kuzbass Botanical Garden. We must transfer the seedlings to the botanical garden, which will be planted at the training ground for hardening and observation,” Sergey Polisadov added. According to the plan, about a thousand pine seedlings should be ready to move to the botanical garden in early autumn. And in March - April next year, it will be clear how successfully the trees have adapted to their natural environment. If the results of acclimatization and survival are good, then the pines will be planted on the site for reforestation.

At the same time, TPU is going to create a city-farm together with partners, where the developments of scientists for the accelerated cultivation of trees will be applied. At the moment, negotiations are underway on the allocation of land on the border of the Kemerovo and Novosibirsk regions for a complex with an area of ​​about three thousand square meters. “One bookmark in the complex is up to a million seedlings a year, we want to gradually increase the volume to 10 million,” said Alexei Yakovlev, director of the Engineering School of New Production Technologies at TPU. In separate blocks of the city-farm there will be zones for germinating seeds and growing seedlings, an open landfill, refrigeration units and systems for ensuring the life cycle of plants.

“The problem of accelerated reforestation is very relevant for the Tomsk region and Siberia as a whole, especially after forest fires: in our region, as part of reforestation, about five million seedlings are planted a year. In the Kemerovo region, where mining enterprises operate and dumps are formed, the issue of restoring forests and soil is also acute,” Alexei Yakovlev emphasized the relevance of the development.

Photo (c) Tomsk Polytechnic University


Read also

  • Air Ecology

    "Jog through the territory of emissions": the Ryazan coach called for a solution to the problem with a fetid smell

  • Waste

    The Eco Inspector app has its first thousand users!

The main thing

  • Forest

    How to properly restore forests

  • Ecotourism

    "By nature": finalists in the nominations. Part I

How to plant a tree - Lifehacker

May 15LikbezAdvice

Follow Lifehacker's advice, and the tree will definitely take root.



How to find the best planting site

Most trees will thrive in flat areas where moisture does not stagnate. If there are no such conditions, you must first level the places of future landings - add or remove a layer of soil and walk along the surface with a rammer. Drainage at the bottom of the planting pit will cope with waterlogging of the soil.

Place the trees on the south and southwest sides to ensure adequate lighting. It is also important to keep a distance between seedlings - as they grow, they should not obscure each other and interfere with development. Therefore, keep in mind what size they will reach in the future, and take this into account when marking out plantings so as not to get dense jungle instead of a beautiful garden.

For example, vigorous apple and pear trees can reach a height of 5-6 meters, so they should be placed 4-6 meters apart. The height of undersized ones, as a rule, does not exceed 2-3 meters, and they can be planted at a distance of 1.5-3 meters. Plums, cherries, cherries, apricots and peaches need a distance of 3-4 meters.

At the same time, vigorous trees should be planted at a distance of at least 5 meters from residential buildings and 4 meters from the neighbor's fence. The distance for medium-sized people is at least 2 meters, for short people - at least 1 meter.

Think in advance where and what kind of trees you want to plant, and only then go for seedlings.

How to choose seedlings

For young trees, it is better to go to trusted sellers or specialized nurseries, which guarantee good quality seedlings and their conformity to the variety.

It is better to choose the so-called zoned varieties: they are specially bred taking into account the climate in different regions. For example, trees suitable for cultivation in the south are unlikely to overwinter in the central zone.

The optimal age of the seedling is from one to three years. Of course, older plants look prettier, and it seems that they will bear fruit faster. But the older the tree, the larger its root system. This means that it will suffer more from digging and transplanting to a permanent place, and this will not have the best effect on survival.

Seedlings can be sold with a closed and open root system. In the first case, they will be planted in pots or containers with soil. The roots of such trees are protected and continue to develop, so after landing in a permanent place, the tree will take root faster. Another plus is that such trees can be planted during the entire growing season.

Seedlings with an open root system lack these advantages. When choosing them, it is necessary to ensure that the roots are protected from drying out: they are covered with wet sawdust or are in a container with a special clay mash. The buds of such trees should be alive, but dormant.

Whichever root system you choose, pay attention to the condition of the trunk and root collar, where the roots directly connect to the trunk. They should not have mechanical damage, dark spots, traces of fungal diseases and rot.

Image: Garden Guide / YouTube

When to Plant a Tree

Close-rooted trees can be planted from early spring to late autumn, from April to October. In the spring, you have to wait until the snow melts, and the temperature stays above 0 degrees. In summer, avoid too dry and hot weather. But in the fall, you need to have time before frost.

Bare-rooted trees should preferably be planted in a dormant state, in early spring or late autumn, when the temperature does not fall below 0 degrees. At this time, the kidneys are asleep.

When choosing a time, be guided by the climate in your area. In the south, it is preferable to plant trees in autumn: the heat here can come already in early spring, and therefore young seedlings can get sunburned before they have time to fully take root. In the central regions, you can choose both seasons due to the temperate climate. But in the north, spring tree planting will be the best option - this way you will exclude the death of a fragile seedling from severe winter frosts.

In addition, it is important to remember that for planting in late autumn, only winter-hardy varieties should be selected. Otherwise, the tree runs the risk of freezing before it begins to take root.

How to store seedlings before planting

Seedlings with a closed root system do not require special preparation. If you do not have time to plant them in the fall, in winter they can be stored in the basement or on a glazed balcony at a temperature of 0 to 4 degrees Celsius.

With seedlings with an open root system, things are a little more complicated. If you buy them in late spring or summer, when the buds are already budding, plant the trees as soon as possible, rather than trying to save until autumn: this way they are more likely to survive. If you buy them in the fall and plant only in the spring, place the roots in plastic bags with damp peat or sand and send them to winter storage. All in the same basement or on a glazed balcony.

How to prepare a planting hole

For spring planting, it is better (but not necessary) to prepare a hole in the fall. So the soil has time to settle, and the nutrients are evenly distributed. For autumn gardening, you can prepare a hole at any time, starting in spring, but not less than a month before the planned planting of a tree in the ground.

Dig a hole of the right size

Image: Igor Bilevich / YouTube

The diameter of the planting hole should be twice the diameter of the seedling's root system, and the depth should be three times the length of the roots. When digging, you need to lay off the upper, fertile, layer of soil on one side, and the lower one on the other.

Make a drainage layer

Shot: Igor Bilevich / YouTube

This is necessary if groundwater is high on the site - in such cases it is often flooded in early spring. Expanded clay, broken brick or crushed stone is suitable for drainage. At the bottom of the pit, you need to put at least 10 cm of material. This will protect the roots of the seedling from rotting.

Fill in fertile soil

Shot: Igor Bilevich / YouTube

Mix the dug-out topsoil in equal proportions with peat, compost or humus. If the soil in the area is clayey, you can add another part of the sand. For additional nutrition, add 50 g of wood ash and 15–20 g of nitroammophoska. Pour all the components together with the soil to the bottom of the pit, mix well again and pour plenty of water.

Wait for the ground to settle

This will take at least 14 days, or even better, wait a month. By this time, the soil will have time to settle down enough, and the planted tree will subsequently not go deep into the ground after rains and watering.

How to plant a tree

After the soil in the hole has settled, slightly loosen the soil at the bottom of the hole and start planting the seedling.

Place the tree in the hole

Image: Igor Bilevich / YouTube

The root collar should be flush with the ground. If it is lower, there is a risk of rotting and even death of the tree.

In order not to make a mistake, you can put a long board or stick on top of the pit. If the neck is lower, add fertile soil to the bottom of the pit, if higher, dig out unnecessary soil.

Gently straighten the roots of the tree so that they point to the sides, not up. Sprinkle them with earth, slightly compacting the soil around the trunk.

Install the stake

Image: Hitsad TV / YouTube

Carefully drive the stake, 1.5 to 2 m long, into the soil until it is sufficiently stable, and tie the trunk to it. This will give the tree the support it needs until it gets stronger.

Water the seedling

Image: Hitsad TV / YouTube

Make a watering hole 5 cm deep, 20-30 cm in diameter around the trunk by removing the soil from the center to the edges with a hoe or small spatula. Gently pour plain water into the hole in small portions, allowing it to soak. For a young tree, two buckets of 10 liters will be enough.

Mulch the trunk circle

Shot: Alexander Kvasha / YouTube

This technique will prevent the soil from drying out and will not allow weeds to germinate. Peat, compost, dry leaves, wood chips or rotted sawdust are suitable as mulch. They need to be poured in a layer of 3-5 cm around the trunk along the diameter of the landing pit.

How to care for a tree

In the first year, caring for a young tree does not cause much trouble. It is enough to follow just a few simple rules: