How to hang an eno hammock without trees
How to Hang a Hammock Without Trees: 6 Fool-Proof Methods
Six Tree-Free Hanging Methods For Your Hammock
In The Wild
Hammock camping sometimes involves staying at campsites that don’t have suitable trees for your sleeping area. So, here are some methods to try on your next adventure:
Cars & Trucks
For car camping situations, pitching your hammock off of your car or truck’s roof rack may be a more suitable option. Of course, doing so is only possible if your car is nearby and if you have a boulder, tree, or structure closeby to serve as a secondary anchor point.
If you’re keen to try out this method, you’ll need a vehicle with a roof rack as well as some tree straps. Tie the straps to the part of the roof rack where it attaches to your car’s roof as this reduces the overall load on your vehicle.
Then, attach one end of your hammock to your roof rack and the other to a secondary anchor point to complete your camping setup for the night.
A hammock stand is one of the most convenient ways to pitch your campsite for the night if you’re staying at a roadside campground.
Hammock camping stands are available at many outdoor gear stores, so you can usually get one relatively easily. Many models are also collapsible, which makes them an ideal choice for use at the campground.
To use one of these stands, you simply need to follow the instructions and set it up in your preferred snoozing location. Once the stand is pitched, you can attach your hammock to it using the included chains or straps. It’s as easy as that!
If you’re hammock camping without trees, rocks are an ideal anchoring system. In fact, you’ll find that many popular camping spots up in the alpine boast massive boulders, which make for superb hammocking locations.
The good news is that hanging your hammock off of rocks is fairly straightforward.
To do so, you’ll want to make sure that your rocks are at a distance of about 10 to 18 feet apart and that they’re large enough to support your weight. This usually means searching for boulders that are at least 6 to 8 feet tall.
To pitch your hammock on rocks, you have a number of options. For example, you can opt for very long pieces of webbing or tree straps to wrap around the boulders to create anchor points.
Or, you can use pieces of climbing gear (e.g., cams and nuts) to anchor into the rock. However, if you’re going to use climbing gear for your setup, be sure to get quality instruction on how to do so properly to avoid injury.
At Home Or The Backyard
For at-home hammocking, you have multiple ways to hang up your snooze spot. Here are some awesome methods to try at home or in your backyard:
If you don’t have any solid trees to use in your backyard, fence posts and poles can serve as the next best thing.
You can buy quality posts at nearly any hardware store for this project. But, make sure that your posts have at least a 5-inch diameter and are 6 to 8 feet in height, or they won’t be able to support your weight while hammocking.
Once you’ve found an ideal hammocking spot for your posts, you’ll do the following:
- Dig two holes into the ground for your posts. These should be about 2 feet deep, 10 to 15 feet apart, and 4 to 6 inches wide.
- Place a post in each hole and backfill the holes with concrete. Encasing your posts in concrete is essential to prevent them from failing under load.
- Wait about 12 hours for the concrete to set.
- Fix J-hooks to each post to serve as anchors.
- Tie one end of your hammock to each post and adjust the tension until you get the perfect hang.
When hammocking at your own home, you can sometimes use buildings as anchor points. In fact, sturdy building structures, like columns, banisters, and joists can all be fantastic pitching locations.
For this method, you’ll want to head to the hardware store and invest in two J-hooks to serve as your anchors. You can bolt these J-hooks to a column and then use carabiners or chains to attach your hammocking setup.
Do note, however, that regular ol’ drywall isn’t strong enough to support your weight. If you want to use your wall as an anchor, you’ll need to use a stud finder to find the frames behind the drywall. Otherwise, you risk damaging your home (and self) in the process.
Build A Hammock Structure
For more permanent hammocking systems at home, you may want to consider building a permanent hammocking structure. This could be as simple as a DIY stand or as complex as a full-on weatherproof snoozing area.
Since there are so many different ways to create a hammocking structure, you can fine-tune your design to meet your space constraints and budget. If you’re looking for some ideas for your structure, you could check out this video of a DIY hammocking pergola:
The concept behind most of these hammocking structures is quite similar to creating hammocking anchors using posts. However, creating a full-fledged structure lets you take your design to the next level.
Use Your Hammock As A Tarp
If all else fails, using your hammock as a tarp is always an option. The majority of hammocks are crafted from highly water-resistant materials, so they can protect you from the elements in a pinch.
For this method, you’ll pitch your hammock like you would if you had a tarp. If two trees or two rocks aren’t available, you can use a set of study trekking poles or your car as your anchors.
One option is to hang your hammock off trekking poles that are spaced 10 feet apart and use guylines to tension it properly. At the end, you should have a makeshift A-frame tarp to keep you dry at night.
Become A Hammock Hanging Guru
At this point, you’re a veritable expert when it comes to figuring out how to hang a hammock without trees. So, whether you’re heading into the backcountry or you’re keen to set up a peaceful napping spot in your backyard, you have plenty of excellent methods to choose from.
We hope our article helped you become more confident in your hammocking abilities. If you successfully used one of these methods during your adventures, let us know in the comments below. Also, don’t forget to share this article so your friends can brush up on their hammocking skills, too!
Last update on 2022-10-17 / Affiliate links / Images from Amazon Product Advertising API
5 Solutions for Hammock Camping Without Trees
There are plenty of reasons to be excited about getting started hammock camping. These days, many camping enthusiasts are forgoing traditional tents in favor of this lightweight and easy-setup option. There’s only one potential downside — can you hang a hammock without any trees?
Let’s say you get to your camping destination, and lo and behold, there’s not a tree in sight. Fortunately, hammock camping without trees is not a problem. Here are five creative ways to hang a hammock.
1. Tying Between Two Poles
Poles and other round supports are great places to hang your hammock. You can find a pole or post almost anywhere, such as telephone poles or fence posts. Be sure to carefully pick your pole, ensuring that it’s stable enough to support your weight. You may want to give it a good shake to make sure it’s sturdy. Some national and state parks even have hammock posts that are free to use.
2. Using Nearby Building Structures
One of the most convenient hammock ideas without trees is to rely on what is already around you. Most state and national parks have outdoor structures like pavilions, rain shelters and bathrooms. If you’re ready to set up camp and you can’t find any good trees, you can always try hanging your hammock from the side of a building in a pinch — but make sure you have permission first!
3. Attaching to Your Car or Truck
If the sun is setting and you still haven’t found a support for your hammock, you can use your vehicle. First, find an ideal place to attach your hammock to your car or truck. Finding a stable attachment point is crucial. Otherwise, you may end up damaging your car. Anchoring a hammock to the bed of a pickup truck is perfect. Attaching it to your side mirror — not so much.
If you have two vehicles, you can set up your hammock between them. Otherwise, you’ll need to find a pole or building as the second attachment point.
4. Investing in a Hammock Stand
When you have a hammock stand, suddenly, the whole world becomes a hammock-friendly zone. This handy bit of gear lets you hang anywhere, including tree-free camping locales like beaches or deserts.
There are many different types of hammock stands out there. So, when looking for the best hammock stand for your outdoor adventure, here are a few things to keep in mind:
- Setup: You shouldn’t need any special skills or tools to set up your hammock stand.
- Portability: You should be able to pack down and easily carry your stand along with your camping gear. Look for a lightweight model.
- Strength and durability: Your ideal stand should comfortably support your weight and not buckle when you get in and out.
- Rain fly capability: Even if your hammock stand doesn’t come with a rain fly, it should have a top rail so that you can attach a tarp on rainy days to stay dry.
5. Going to Ground With Trekking Poles
This method is perfect in a pinch when you need to pitch your hammock without trees spaced evenly apart or only have a vehicle and nothing to attach the other side of your hammock to. All you need is a pair of trekking poles, like sturdy tree branches or dowel rods, ground spikes and some cordage.
Here’s how it works:
- Collect two similarly sized sticks, or poles, roughly your height. Shorter sticks will work, but you’ll need to adjust their angle later on.
- Sharpen one end of each stick, so it digs into the ground well.
- Gather the sticks and tie them at the top on one side, so they are easily movable. Shape them into an upside-down “V” and drive the sharpened ends into the dirt.
- Loop your hammock over the cross-section where you tied the sticks together and run the strap around the sticks once to hold it in place.
- Take 10 feet of nylon line — 15 feet if your hammock needs to accommodate a heavier load — and make overhand knots, or loops, in every 10 inches of line.
- Drive your primary ground spike or nail into the ground near the hammock and tied sticks. You might need longer spikes if your hammock will be accommodating heavier weight.
- Fold your looped nylon line into two evenly sized sides. Use the first loop on one side and place it around the ground spike.
- Stretch the remainder of the line flat and pull it tight. The long, flat line should be tense and close to the ground so that the weight doesn’t pull the spikes from the dirt when you’re inside the hammock.
- Secure a second ground spike in the second loop and repeat the process for the third loop or as needed.
- Repeat the loop process on the other side of the nylon rope, using the same primary spike at the top. The finished shape will look like a “>” symbol, with the point being the main spike and each side being the looped nylon rope with additional ground spikes.
- Take the line attached to your trekking poles and hammock and retie it to the primary ground spike. Tie it with a loop you can easily cinch together.
- Once you’ve attached both lines to the spike, test your hammock and make adjustments as needed. You might need to move the tied sticks or adjust your tree line to keep your hammock off the ground.
You can also adapt this method, so you don’t have to do as much manual work — like sharpening sticks and hand-tying loops — by using dowel rods, wire cable and U-nut fasteners. The process is similar, but you thread the cable inside the dowel rod through drilled holes in the top and drill bolts into the bottom of each dowel rod so you can drive them into the ground.
Find Your Ultimate Hammock Camping Gear With DutchWare
Whether you’re looking for a lightweight, strong hammock stand or other supplies for your next great hammock camping adventure, DutchWare is a name you can trust. We’re an American manufacturer of some of the best hammock camping gear on the market. Browse our shop and get outfitted with everything you need for hammocking in the great outdoors.
Written & Reviewed by Josh
8 ideas how to hang a hammock in a country house without trees
The distance between the logs should be 30 cm greater than the length of the hammock. There are several mounting options.
- The easiest is to dig in two wooden poles no less than 1.5 meters deep and use them for fastening like trees. The difference is that the rope on the beams can be better secured with self-tapping screws.
- The method is more complicated - to build a rectangular structure of four beams, and horizontal bars located at the top. Attachment points can be placed in the upper corners of the resulting "rectangle".
Pergola frame or arbors
If your summer cottage has pergolas or arbors with a pillar diameter of at least 20 cm, located at a distance of about 3. 5 m from each other, they will be ideal supports for a hammock. The roof will create a natural shade, and save from the sun's rays even on the hottest day.
If there is no one to install a hammock in the country, and there is no way to overpay for the services of professionals, you can buy a portable frame hammock. It can be placed where you want, if necessary, moved from the sun to the shade and removed from the street when it starts to rain.
View a selection of beautiful dachas.
The advantage of such a hammock is that its weight is a little over 10 kg, but with a wooden frame a little more.
Lightweight portable hammock.
Veranda or terrace
This mounting option is suitable for owners of country houses and verandas with strong brick or concrete walls. In order to hang a hammock, drill two holes in opposite or adjacent walls, at the required distance, insert anchor rings and reinforced carabiners into them. The longer the hammock, the higher the attachment points should be.
See also a beautiful design project of a terrace near Moscow in a private house.
You can also attach the hammock to the walls through the door frame.
To install the hammock, you will need two iron poles with a diameter of 15-20 cm, metal fasteners and cement mortar. The poles must be installed at the same distance as the wooden beams, holes must be dug in the ground for them at least a meter deep, and concreted. After the solution has hardened, you can mount the hammock in the usual way.
Ceiling or ceiling beams
Usually the ceilings of country houses are not intended for the installation of hammocks, this option can only be used if metal structures are built in at the edges to increase rigidity. You need to attach to them or directly to the beam, if it is strong enough.
The technology is simple: install the anchor rings, reinforce them with fixing nuts and hang the hammock. Before installation, evaluate the height and width of the room. It is desirable that there is 1.5 meters of free space to the floor and each of the walls.
Ceiling placement of hammock chairs
Fence posts or outbuildings
If the height of the fence allows, the posts of two of its spans, converging at right angles, can be used as fastenings. So the space near the fence will be used to good use, and the hammock will have enough space for swinging.
Be sure to look at what to plant along the fence.
Round Base Hammocks
Impress your neighbors and friends with this original design. The unique shape of the hammock allows three people to relax in the hammock at once and enjoy pleasant conversations.
They are not cheap, so the place for installation must be chosen carefully. A moderately shaded, windless area is suitable, deep in the garden and away from noisy neighbors.
To understand whether it is worth spending money on buying a hammock, you can first make it yourself. All you need is a suitable piece of thick fabric, eyelets, a pair of spade handles as a base, and a thick linen cord.
Where and how to hang a hammock in the country: on a tree, poles, beams
It is pleasant to relax in the summer cottage, lying in the shade. To do this, you just need to know how to properly hang a hammock in the country. We'll talk about the different ways of fastening, including poles and beams, as well as where it is best to place it.
Where and how to attach the hammock:
Mounting on trees
On portable frames
On the ceiling
It is most convenient to equip such a resting place next to a lake, pond or pool, on the far side of the garden. But not every site has a suitable corner, so the structure is often hung in a house, gazebo, on a porch, balcony or terrace. In any case, when choosing a site, you need to build on several criteria.
- No direct sun or draft. In order not to get sunburned and not to freeze.
- Smooth, clean bottom surface. When it rains, the pits will fill with water - it will be inconvenient to climb into a hammock. Under it should not be snags and stones.
- Distance from noise. It is best to choose a place away from the road, garage, water pump, transformer.
- Distance between supports 3-4 meters. The gap should slightly exceed the length of the canvas (+30 cm), so that after installation it does not sag too much.
- The diameter of each tree and pole is approximately 20 cm. The support must be intact, without splits or other damage.
These rules are not that hard to follow. Otherwise, it all depends on the layout of the site and your taste. Of course, it is best to fix the structure so that it opens up a beautiful, calming view. True, a picturesque place in the open air can have one minus.
Rest near water and in a closed area is spoiled by mosquitoes and other insects. But there is a way out of this situation - a mosquito net or a dense canopy.
As we wrote above, a hammock in the country can be hung between two trees or come up with a homemade frame. One of the options is racks dug into the ground or beams located under the ceiling. Vertical poles are made removable and stationary. Sometimes a roof is attached to them. The base can also be the wall of the house with a pillar dug in opposite. On the terrace or in the gazebo, the canvas is stretched between the wall and the existing crossbars. Let's consider each method in turn.
If the structure will be attached above the branches, then it is better to choose long rods so that it does not fly off when swinging. Branches should not be thin or damaged. You can make a simple hanging bed with your own hands. You will need rope or straps, thick fabric, and two carabiner hooks. The video shows how to attach a hammock to a tree.
You can hang the product without carabiners - just by tying strong knots. In addition to the obvious advantages (budget, simplicity), this method has disadvantages. The mount often looks unaesthetic, it is problematic to adjust and untie it.
- Strong rope with a diameter of at least 8 mm and a length of 2-3 m.
- Cambric. An elastic nylon tube that is put on a rope in the area where it comes into contact with the bark. Instead of cambric, you can put a piece of dense fabric or leather under the loop.
- Tie a simple guide or figure eight knot on one end of each line. Instructions are provided below.
- Pass the loose end through the eyelets or eyelet on the canvas and through the loop at the other end.
- Attach the structure to a tree (preferably over a branch) using a choke knot. The hammock should be hung at a height of 1.5-2 meters. So that in a suspended state the distance from it to the ground is not less than 40 cm.
You can determine the optimal height by multiplying the distance between the supports by two and dividing the resulting number by three. If you did everything right, the design will resemble a banana. Try to sit on it, and then gradually lie down to check if the fabric is twisted or not. During the test, the fasteners should not wobble, move or rotate. Also pay attention to the supports - you need them not to creak or bend.
Hammock Naturehike with inflatable board
Instructions for Knitting the Simple Guide Knot
Fold the loop and wrap it 180° around it. Pass through the loop formed and tighten.
- Wrap the tree around to form a loop.
- Take the strap and fold it in half to form a loop.
- Place the lower free end over the upper one at the base of the loop. Should be an eight.
- Pass the same end through the first loop and tighten.
- Wrap the rope around the support.
- Just below the base of the large loop, make a small one, without turns.
- Pull the free end through it. While doing this, hold the loop with your hand.
- Wrap the running end behind the webbing over the small loop and pull it through again.
- Tighten the knot.
Attachment to carabiners and rope
At the end of the rope, you need to tie an “eight”, thread the carabiner through it and wrap the rope around the barrel once or twice. The remaining free section is wrapped around the stretched part until it ends and secured with a carabiner.
Now let's talk about how to hang a hammock in a country house without trees.
How to weave a rope hammock with your own hands: detailed instructions and tips
Height, support diameters must be the same as in the previous case. To calculate the distance between them, add 30 cm to the length of the canvas. The frame can be sanded and stained to protect wood and decorative. Metal pipes - paint or use anti-corrosion impregnation.
- Bury the posts at least half a meter deep, compact the surrounding soil. If the length of the pillars is more than two meters, the optimal depth is at least one meter. To strengthen the structure, concrete is poured into the bottom of the pit and beams are placed in it.
- Cement the site. The option with concreting is more reliable - the soil will not become sour from rains.
You can attach the fabric in the same way as on trees. Use knots or self-tapping hooks to hang the canvas between the posts. The second option is considered more reliable, since the rope can slide on the pole. So, you got a solid, stationary structure that will last for many years. It can be supplemented with a canopy in case of bad weather or a pergola - an openwork partition for growing flowering and decorative leafy vines.
If you don't want to be stuck in one place and do concrete work, try making a portable frame.
You will need
- Boards 1.5 m long and 1.3 m long (2 each) for the cross members. Section 100*30 mm.
- Longitudinal bars with a section of 80 * 80 mm and a length of 3 meters (2 pcs.).
- Side beams 2 m long (2 pcs.).
- 1.45 m long support beams (2 pcs.).
- Drill, hacksaw, grinder.
- Carabiners or anchor hooks.
- Sand boards, beams and paint them with stain. After the frame is assembled, the attachment points will not be available for processing.
- Make jibs from 2m beams. They should be located at an angle (about 60 °) - so that the distance between them is 3-4 m. In the upper part of each part, make hooks on which to hang the canvas.
- Attach the jibs between the 3 meter longitudinal strips with bolts.
- Cut the stop bars to fit at the top with the jibs.
- Fabricate the cross members. Pin a 1.3 m section on a 1.5 m section. The distance from the center of the board to the edge of the entire structure should be no more than 60 cm.
- Place the bottom of the stop bars and the longitudinal boards on the cross members.
- Hang the fabric from ropes or carabiners.
In the video - a visual instruction for the manufacture of a similar framework.
If the wall is load-bearing, hooks 10 cm long and 10 mm in diameter will suffice. For a non-load-bearing wall, take large threaded hooks and secure them with nuts. It should be borne in mind that such a surface may be unreliable. Pipes, door jambs, light partitions will not work for your purposes.
Hammock chair Greenhouse
The rest of the hanging method is the same. For mounting on crossbars, it is better to use self-tapping hooks if they do not have transverse elements that will prevent the loop from sliding. Before installing the structure, imagine the swing path. This is necessary to understand whether furniture and other items will interfere. Then mark places for bolts or hooks, drill holes in them. If it is concrete, clean the cement crumb out of it before mounting the hook.
The video shows how to attach the structure to the balcony wall. This method can be used for a country terrace, and for an apartment.
The house can be supported by ceiling beams or a concrete base. You will need ropes or chains, a hammer drill (for concrete) and fasteners. For wooden floors, ordinary screw-in hooks with thread will suffice.