# How to hang christmas lights on a very tall tree

## How to Put Christmas Lights on Tall Outdoor Trees | Davey Blog

One of the joys of Christmas time is cruising around and admiring the many twinkling trees. Hanging Christmas lights on outdoor trees is the perfect way to bring holiday cheer to your home and neighborhood.

Even better, lighting your outdoor trees is easier than you think! Use the steps below to hang Christmas lights on tall outdoor trees.

### Guide to Hanging Christmas Lights on Outdoor Trees (Tall and Evergreen)

#### How many feet of lights do I need for outdoor trees?

Use this simple math trick to determine how many lights you’ll need.

• Measure around your tree’s trunk to find the circumference.

• Measure the height of the tree–a guesstimate works.

• Decide how far apart you want the lights, typically 2 to 3 inches.

• Divide the height by the distance you want between the lights.

• Multiply the circumference to see how many feet of lights you need.

#### Steps on How to Hang Christmas Lights on Outdoor Trees

1. First, protect your tree from potential burns or damage by checking the lights. They should be marked for outdoor use and free of any burned-out bulbs.

2. It’s no fun to start stringing and then run out of lights! Use the tip above to make sure you have enough before you start.

3. Secure an extension cord at the base of the tree.

4. For especially tall trees, grab a ladder and a friend to help.

5. Wrap the light string into a ball and begin unraveling as you move up the trunk. Be sure the prongs that you need to plug in are on the bottom.

6. Plug another string of lights into the first, secure both with electrical tape and start wrapping the branches. If the lights don’t latch easily, use twist ties to hold them in place.

7. Keep wrapping branches where you see fit. Every limb may not need to be covered, so turn on the lights periodically to see how they look. To be safe, don’t attach more than three light strands to one extension cord.

8. Decorating a pine tree? Even simpler! Start at the top of the tree and drape lights above and below pine branches. Secure them with tree clips along the way.

Topics:

• Holiday Tips

### Related Blog Posts

Property Maintenance & Landscaping

#### This Winter, Decorate Your Porch to Impress

While it may seem overwhelming, decorating for the seasons doesn't have to be. Try some of these winter front porch decor suggestions to brighten up your holidays.

Property Maintenance & Landscaping

#### How to Safely Hang Outdoor Lights: The Dos and Don’ts

Outdoor tree lighting requires a few extra steps to make sure they are safely decorated without damaging trees. Get a step-by-step tutorial with tips and tricks on how to put Christmas lights on your outdoor trees; as well as a few don’ts to keep in mind.

Back to our Blog

Subscribe to the "The Sapling," the Davey Blog's email newsletter, for the latest tips to keep your outdoor space in tip-top shape throughout the year.

### Get In Touch With Us!

We pride ourselves at Davey Tree on providing prompt, professional and personalized service from certified arborists that live, work and engage in your community. Contact one of our Davey Tree specialists for your residential, commercial, utility, or environmental needs.

## 3 Tips on How to Hang Lights on a Tall Tree Without Using a Lift

‘Tis the season to hang the wreaths and string the Christmas tree lights! Christmas lights are one of the biggest and brightest signs of the holiday season, and lights on a tall tree are always a sight to behold. While a decorated tree will forever catch people’s hearts and eyes, getting them ready can take a lot of preparation, especially when working with an oversized Christmas tree.

Of course, you can turn to a company like Christmas Light Installers LLC and our commercial or residential Christmas light installers. But there are also a few key tricks to follow and some important tips for putting Christmas lights on a large outdoor tree. Whether your tree is 12 ft. or 50 ft, and if you decide to go the route of a DIY installation, consider these tips to hang lights on a tall tree without using a lift.

Finding the Right Measurements

The first step to putting Christmas lights on a large outdoor tree is to find the right measurements. The last thing you want to do is hop on a tree without understanding how your lights will look or how many you’ll need.

Measure the circumference of the tree trunk, and estimate the height to the top of the tree. A relatively close guesstimate works fine in this case, but make sure you start from the base of the tree.

Once you have these figures, determine how far apart you want your lights to be. Two to three feet is usually a good distance, but you can go wider or closer. Divide the height of the Christmas tree by the length of how far apart you want the lights to be. Multiply this figure by the circumference you measure; now you know how many feet of lighting you need.

If you want to avoid a few calculations, a good rule of thumb is to use 100 lights for every 1.5 feet of the tree. Either way, before you put Christmas lights on a large outdoor tree, you must make sure you have accurate measurements.

Use a Painter’s Pole

The toughest part about a tall Christmas tree is not just getting up there but finding out how to make a beautiful design while suspended in mid-air. Sure, a friend can provide help, but there’s got to be some way to make your life easier, right? Fortunately, a painter’s pole is a great way to ensure those hard-to-reach limbs are lit.

Start by removing the roller so that the metal hook is exposed. You may need to purchase a hook, which you can find at most home improvement stores. Before you begin stringing, make sure your lights are plugged into an outlet and extension cord if you need one. You can then place the first strand of lights into the hook and slowly work your way around the tree. Pro tip: start from the bottom and work your way to the top, adjusting the pole’s length when needed.

Don’t have a painter’s pole? No problem! You can still put Christmas lights on a large outdoor tree with a makeshift pole. First, find two old brooms and saw off a clean edge on the first broom. Take two nails and drive them into the sawed-off edge, creating a V-shaped image that allows you to pull at the lights.

Finally, tape the two sticks together with duct tape, making them close enough to not wiggle but not so much that you don’t maximize the length of the two brooms. Best of all, if you need to put lights on a taller tree outdoors, you can extend the pole a bit longer with another broomstick!

This Home had a Magnolia tree’s trunks wrapped in LED mini lights. This service is called a “Trunk Wrap”.Use a Ladder

A ladder might be the best option if you’re working with a tree that exceeds the length the painter’s pole can reach. When using a ladder to decorate your tree, always try to have another person spotting you to ensure the ladder stays stable. Or you might consider calling one of Santa’s little helpers to join in on the fun!

When using a ladder, try decorating the tree as much as possible while on the ground. When you’re ready for a height boost, wrap the light strings into a ball so that you can unravel them as you go. This will also save you from climbing up and down the ladder as you run out of lights. Have your little helper walk the strings around the tree as you place them from limb to limb.

Remember, you don’t need every single branch wrapped. Occasionally, you or your helper can test the lights from up close and at a distance to see whether or not branches may seem overloaded with lighting.

Additional Tips for Putting Lights on a Tall Tree Outdoors
• Always assess the area for any safety or fire hazards when hanging lights outside.
• Check the lights to ensure they are for outdoor use before putting them up.
• Consider using LED lights to save energy.
• Make sure your light strands don’t have any missing or broken bulbs.

Also, remember not to hang outdoor lights in dangerous weather like rain or snow. If your extension cords run along important walkways, use tape to prevent them from tripping up your family or mailman.

If you feel like you’re having a tough time hanging your lights, you don’t have to do it alone! Christmas Light Installers LLC offers permanent Christmas lights that light your home throughout the holiday season and stay hidden on your walls the rest of the year. Give us a call today, and you won’t have to worry about having to put lights on a tall tree outdoors again!

What’s Better Than Hanging Lights Yourself? Get Professional Installers!

If you’re having trouble putting Christmas lights on a large outdoor tree, you don’t have to work alone. Fortunately, homeowners and businesses can light up their property with a simple call to Christmas Light Installers LLC. Our Christmas light installers in Indianapolis, IN, help you light your entire property with unique designs and various types of Christmas lights, all at an affordable cost. Contact our expert installers today to put lights on a tall tree outdoors without the hassle!

3 Tips on How to Hang Lights on a Tall Tree Without Using a Lift

## How to hang a garland on a Christmas tree beautifully: indoors and outdoors, step-by-step instructions, diagrams and videos

Decorating a Christmas tree is an important moment that not only children, but also adults are waiting for. Packages with toys and tinsel are taken out, beautiful balls are hung, perhaps some decorations are even made by hand. But the Christmas tree must sparkle and shine, and this requires LED lights. How best to hang a garland on a Christmas tree is described in this article.

### Decorating the Christmas tree correctly: garland or toys first?

It is much more convenient to decorate the Christmas tree in the following order:

1. First of all, lights are placed on the Christmas tree. Beforehand, it is recommended to lay out the garland on the floor and check the operation of the light bulbs, then distribute it on the tree.
2. Only after that you can hang toys on the branches: balls, bells, houses, etc. Since the bulbs are already on the tree, you can assemble a composition that matches the color. For example, hang a golden bow near the red light. When all the decorations are on the tree, you need to make sure once again that they are evenly distributed and securely fastened to the branches.
3. At the end of the decoration, artificial snow can be spread on the ends of the paws, and the entire Christmas tree can be decorated with rain, beads and tinsel.

Reasons why it is better to hang an electric garland on the Christmas tree in the first place:

• Without additional decorations, the wire is easy to lead to the outlet.
• You can turn on the lights, check their work, see how beautifully they are distributed among the branches. In which case, the garland is easy to remove and reposition.
• Lights are easier to match with Christmas decorations so that they are in the right color scheme.

Do not forget about the design concept, which many are guided by in the process of preparing for the New Year holidays. If you want to achieve the effect of an inner glow on the tree, place the lights closer to the trunk, and then hang the rest of the decorations. The same applies to New Year's lighting with large bulbs - they need to be distributed on the Christmas tree in the first place. Designers prefer to hang small flashing LEDs on a Christmas tree already decorated with toys. A slight shimmer will give the Christmas tree a magical aura, and the lights will attract attention.

Hanging the lights on the Christmas tree before or after the toys - everyone decides for himself. The main thing is that the preparation for the New Year brings joy.

### How to choose a garland?

Among the abundance of shimmering garlands presented in stores, it is difficult to make a choice. First, let's look at the main types of LED decorations:

• Filamentous. Most often, it is with such lighting equipment that the Christmas tree and the room are decorated. They can be in the form of one long cord on which LED bulbs are located. Manufacturers also produce garlands in the form of a grid or fringe - it is convenient to hang them on windows and walls.
• Street. To decorate the Christmas tree on the street, they use special transparent flexible garlands with LED bulbs, which are reliably protected from moisture.
• LED strips. They are used not only as a New Year's decoration, but also for additional lighting in the room.

Manufacturers of New Year's lighting equipment recommend purchasing an LED decoration with 500 bulbs for a two-meter Christmas tree (their number is indicated on the package). If the tree is 30-50 cm taller, it is better to choose a garland with an additional 50-100 bulbs.

Classic Christmas decorations can glow with a yellowish dim light, and light bulbs often fail. Manufacturers have come up with and introduced many innovations so that the garlands work for a long time and decorate the Christmas tree with iridescent, multi-colored lights.

But do not forget that the garland can be dangerous to health and even life:

• To avoid fire due to excessive heating of the bulbs, you should purchase a decoration with a power of no more than 65 watts.
• Do not let children turn lights on and off by themselves.
• Do not put strings with lights in glass bottles, despite the fact that such arrangements look very nice. Such decor can provoke an electric shock.

What to look for when buying LED garlands:

1. The plug must be durable, made of quality material, not change its original shape.
2. You can calculate the desired length of the decoration as follows: measure the height of the Christmas tree and buy an ornament three times longer in length.
3. The wire that will be connected to the outlet must be at least 1. 5 m for a home Christmas tree, for street decor - 10 m or more.
4. Light bulbs must be tightly fixed, not wobble, much less fall out of the sockets.
5. The power supply must only be opened with a screwdriver or other special tools. It is better to look at the soldering of wires before buying a product.
6. For a street Christmas tree, purchase special lighting equipment with additional protection against moisture. On the packaging, the manufacturer must indicate that the jewelry is intended for external use.
7. Samples of good quality must be free from foreign, unpleasant odors.
8. The purchased model must be certified, otherwise it is forbidden to use it to decorate the Christmas tree and the room.

The operation of the garland should be checked in the store, and at home it is undesirable to immediately plug it into the outlet. Give time for the bulbs to warm up to room temperature, only then proceed to the decor of the Christmas tree.

### How to decorate a Christmas tree with a garland?

There are several secrets on how to hang the garland so that the lights look beautiful:

1. The decoration is placed on the Christmas tree only after the tree is set upright. If the Christmas tree will stand in the corner, you need to think in advance which side of it should look more elegant.
2. Before hanging a luminous decor, lay it out on the floor, check the operation of all the bulbs, connect it to the outlet to make sure that all the lights are working.
3. It is more convenient to start hanging the decoration from above, evenly distributing the lights in a zigzag pattern over the branches. If the tree will be in the center of the room, start at the top and work your way around.
4. If you place lights near the trunk of a tree, it will look magical and mysterious, but it is better not to use flickering light bulbs for this.
5. A thin garland with monochrome lights can be wrapped around each branch, starting from the lower legs.

Is it possible to hang a garland on an artificial Christmas tree and how to do it correctly:

• Artificial tree needs additional, warmer lighting. Instead of blue or silver light bulbs, decorate the artificial Christmas tree with gold, red, purple lights.
• Any artificial Christmas tree can be decorated with a garland, but provided that the device is fully functional, there are no bare wires in it, and all bulbs are tightly held in cartridges.
• If there is not enough cord to decorate the entire height of the Christmas tree, you do not need to remove the decorations and start over. Buy another copy and complete the decor to the end.

#### If the Christmas tree is in the house

Interior designers offer their own way to decorate the Christmas tree with a garland:

• Enter the room and pay attention to where your eyes first turned. It is in this place that it is better to put a shiny and sparkling Christmas tree. In addition to the tree, you can decorate windows, stair railings, fireplaces, bookshelves, etc. with lights.
• Come up with a style of New Year's decor, and only then choose decorations for it. Light bulbs are different: plain, multi-colored, with a warm yellowish tint, curly. For a classic style, it is better to choose traditional colored lights, and for a Scandinavian or eco-style, plain or white ones are suitable.
• When choosing a decoration, consider not only the length, but also the width of the Christmas tree: the more fluffy it is, the longer the garland will be needed.

See also: Creating a Christmas tree from a garland on a wall or window with your own hands

The sequence of further actions:

1. We check the health of the decoration before hanging it on the branches.
2. Preparing a few extensions in case the cord is not enough to decorate the entire Christmas tree. Most garlands are made in such a way that it is possible to attach them to each other. But according to fire safety rules, it is impossible to insert a Christmas decoration with more than 500 lights into one wire.
3. So that the decor does not get confused, it is more convenient to decorate the Christmas tree together. You can wind the cord into a ball, starting from the part opposite to the plug. So you will hold the decoration in one hand, and lay out the light bulbs on the branches with the other.
4. Light up the lights to see what colors will be on the tree. Start hanging decor by choosing a pattern: zigzag, spiral, top-down, diagonal, vertical lines, etc.

#### How to hang a garland on a street tree?

Tips and tricks for decorating a street tree on your porch or backyard:

• Better to use warm colors of lights: yellows, reds, purples.
• The plug from the garland must reach the socket. If you cannot connect the decoration to electricity, choose garlands that run on batteries.
• Buy LEDs that are waterproof. On the packaging, the manufacturer must indicate that the garland is allowed to be used outdoors.
• You can purchase ready-made sets of New Year's lighting equipment, for example, 10 luminous threads 10 m long each. With this composition, you can easily decorate a street Christmas tree 5-10 m high.

To create a festive, magical mood in a country house or in the country, they often use special illumination from luminous bulbs. Not only a decorated street Christmas tree looks beautiful, but also a luminous roof, balcony railings, columns, windows from the outside, trees and shrubs.

#### Patterns

There are several ways to hang the decoration on Christmas tree branches:

1. Start from the top, evenly distributing the bulbs over the lower legs in a spiral with a little sagging.
2. To make it easier to hang toys later, the lights can be attached closer to the trunk.
3. If the Christmas tree is in the center of the room, it is better to distribute the luminous decoration in a circle.
4. On the tree, which will be located in the corner of the room, the garland is hung on the branches in a zigzag pattern.
5. It is permissible to start decorating the Christmas tree from the lower branches, in tiers, as if obliquely, or on top with a serpentine.

There are no clear instructions on how to hang garlands, except for basic fire safety rules. If you want to make the Christmas tree sparkling, use several garlands. Hang decorations in a zigzag, top-down or vice versa, wrap branches in a spiral or decorate in any other way. The main thing is that the creation of New Year's decor brings joy and cheers up.

See also: How and what to choose a Christmas tree for the New Year?

## How beautiful it is to hang a garland on a window, wall, Christmas tree: tips and tricks

December is coming, and the New Year is coming. To feel that very festive mood, when worries fade into the background and only the expectation of a miracle remains, you need to properly decorate the apartment. The easiest way: hang a garland on a Christmas tree, window or wall. It would seem that it could be easier? But here, too, there are tricks. Let's talk about them.

Oksana Barabanova

Tags:

Accessories

Decorations

New Year holidays

Christmas trees

New Year decoration

How to hang a garland at home to create a New Year's mood

The right entourage is the key to a fun holiday and a pleasant long weekend spent with your family, so it is so necessary to think over New Year's decorations. Our today's material will tell you how to hang garlands beautifully so that they harmoniously fit into the interior.

### How to hang a garland

Garlands are one of the most popular Christmas decorations. Their design is incredibly diverse. To make the right choice, let's orient ourselves in the range of stores. So, garlands are of the following types:

• Garland-thread - the simplest type of garlands that is used in most homes, great for decorating Christmas trees, furniture and walls;
• Mesh garland - is a "honeycomb" of wires with light bulbs. They are convenient to decorate walls, windows and ceilings.
• Fringe garland - light bulbs connected in bundles, can be LED. The fringe garland looks great in the design of windows and walls.
• Duralight is a transparent wire with lights inside, thanks to the flexibility of the cord, you can create a huge number of different patterns and inscriptions, as well as beautifully outline the contours of objects, such as mirrors or paintings, with a garland.

You have chosen the decoration you like, and now the question arises: how to use it in the interior? How can you hang a garland so that the New Year's decor is thoughtful, not messy? Read more about this.

### How can I fix the garland?

It depends on the surface on which you are going to hang the garland.

• The adhesive tape is suitable for smooth surfaces, for example, for plastic window slopes. At the same time, it can leave a sticky mark on the glass itself, which will have to be washed off. You should not hang a garland on a wall with wallpaper using adhesive tape, because their top layer will peel off along with it. It is better to use double-sided foam tape.
• Thumbtacks or pins suitable for wallpaper or fabric surface. Holes from them will be invisible.
• Vacuum suction hooks are handy for glass as they won't leave marks. It is necessary to choose small hooks so that they do not catch the eye.
• Wire Clip Hooks are the perfect solution for securing because they will hold tight, be invisible and leave no marks.

In general, before hanging a garland, decide what exactly you are going to decorate and take the necessary fasteners for the surface. We will tell you more about them later.

### How to hang a garland on a window beautifully

To securely fasten a garland on a window, you will need strong tape, hooks with suction cups, or special clips that are sold in hardware stores.

The easiest way is to glue a simple thread garland around the perimeter of the window. However, if such a decor seems not impressive enough to you, we suggest making a curtain from a mesh garland. For greater mystery, it can be covered with transparent tulle.

How to hang a garland on the window to stand out from the neighbors? The original solution is to place a duralight garland directly on the glass, creating some kind of inscription or drawing.

How beautiful it is to hang a garland on the wall

Ordinary adhesive tape is not suitable for attaching a garland to a wall. It will damage the wallpaper and leave sticky marks on the painted wall. Better buy double-sided foam tape. You can hang a garland on the wallpaper using stationery pins. Special clips for attaching garlands are also great.

A linear garland can be used to create a unique decoration on the wall. Traditional New Year motifs are popular: Christmas trees, deer, snowmen. Here are some ideas on how to beautifully hang a garland on the wall.

#### How to hang a Christmas tree garland on the wall

This pattern is not complicated at all, but it looks cute and very New Year's. Place the mounts on the wall in a zigzag pattern and hang a garland, and then decorate the makeshift Christmas tree with toys.

#### How to hang a garland on the wall in the form of an inscription

A duralight garland is best suited for this purpose. Put on the wall any inscriptions related to the holiday or motivating you and your family. We present a few ideas in the photo. Here you have to work a little and “play with fonts”, but it’s better to come up with and sketch the inscription in advance.

How to hang a garland on the wall in other ways

For those who are not looking for easy ways, we offer to come up with real pictures from garlands. Use additional decor: paper snowflakes, photographs, confetti, sparkles. Photo cards can be easily attached to the garland by placing it horizontally. So you will decorate the room and refresh warm memories in your memory. Of course, it is more convenient to look at the pictures if the garland is hanging on the wall.

You can use some decorative clothespins or even the most ordinary ones to attach photos. The latter can be painted and pasted over with beautiful paper. Or hang photos on paper clips by connecting two pieces for convenience. This decor looks very nice and cozy.

### How to hang a garland in a room

To decorate a room with a garland, attach it around the perimeter of a doorway or along the ceiling. A garland-curtain will also look great on the door - you will get a real portal to the New Year's fairy tale! We offer a few more original options on how to hang a garland beautifully in a room.

#### How to hang a garland in a room on a mirror

A luminous garland looks fantastic on the mirror frame! The lights will be reflected in the glass, creating real magic. Try wrapping a simple LED garland with tinsel, and then the effect of the decoration will become even more impressive.

#### How to hang a garland in a room on a table

The garland looks especially impressive under a glass top. In combination with beautiful dishes and wine glasses, you will get an original New Year's decor for a kitchen or dining room. But even this can not be stopped. Place a Christmas tree wreath on the table and wrap it with a garland.

#### How to hang a garland in a room on a bed

The garland can be stretched along the headboard. Then you will literally fall asleep and wake up with a feeling of a New Year's miracle! If you have a bed with legs, wrap a garland around them too.

### How to hang a garland-curtain on a window

A garland in the form of a canvas deserves special attention, which is simply created to decorate windows. If your garland-curtain is light in weight, you can secure it with double-sided tape. For heavier jewelry, a glue gun is suitable. It will help to hang the product both on the frame and on the glass. Tulle hooks will also be a great help.

Before you hang an electric garland-curtain on the window, consider whether the length of the wire reaches the outlet or you need to use an extension cord. In general, a garland on batteries will allow you not to think about it.

### How to hang a garland on a Christmas tree

The garland will perfectly complement the Christmas tree decoration. To prevent the decoration from slipping, use special clothespins. Fix them on the branches where you want to hang the garland.

The garland does not have to match the toys. You can also choose a contrasting decoration: red to blue, blue to gold, yellow to purple. And of course, garlands with multi-colored light bulbs are always relevant - there is never too much color in the New Year!

If your Christmas tree is richly decorated with toys, hang the garland as close to the trunk as possible so as not to create a clutter effect.

Thinking about how to hang a garland on a Christmas tree, most people imagine the serpentine method. However, this can also be done crosswise and even stretching the garland from top to bottom.