# How to hang lights on a tall tree

## How to Put Christmas Lights on Tall Outdoor Trees | Davey Blog

One of the joys of Christmas time is cruising around and admiring the many twinkling trees. Hanging Christmas lights on outdoor trees is the perfect way to bring holiday cheer to your home and neighborhood.

Even better, lighting your outdoor trees is easier than you think! Use the steps below to hang Christmas lights on tall outdoor trees.

### Guide to Hanging Christmas Lights on Outdoor Trees (Tall and Evergreen)

#### How many feet of lights do I need for outdoor trees?

Use this simple math trick to determine how many lights you’ll need.

• Measure around your tree’s trunk to find the circumference.

• Measure the height of the tree–a guesstimate works.

• Decide how far apart you want the lights, typically 2 to 3 inches.

• Divide the height by the distance you want between the lights.

• Multiply the circumference to see how many feet of lights you need.

#### Steps on How to Hang Christmas Lights on Outdoor Trees

1. First, protect your tree from potential burns or damage by checking the lights. They should be marked for outdoor use and free of any burned-out bulbs.

2. It’s no fun to start stringing and then run out of lights! Use the tip above to make sure you have enough before you start.

3. Secure an extension cord at the base of the tree.

4. For especially tall trees, grab a ladder and a friend to help.

5. Wrap the light string into a ball and begin unraveling as you move up the trunk. Be sure the prongs that you need to plug in are on the bottom.

6. Plug another string of lights into the first, secure both with electrical tape and start wrapping the branches. If the lights don’t latch easily, use twist ties to hold them in place.

7. Keep wrapping branches where you see fit. Every limb may not need to be covered, so turn on the lights periodically to see how they look. To be safe, don’t attach more than three light strands to one extension cord.

8. Decorating a pine tree? Even simpler! Start at the top of the tree and drape lights above and below pine branches. Secure them with tree clips along the way.

Topics:

• Holiday Tips

### Related Blog Posts

Property Maintenance & Landscaping

#### This Winter, Decorate Your Porch to Impress

While it may seem overwhelming, decorating for the seasons doesn't have to be. Try some of these winter front porch decor suggestions to brighten up your holidays.

Property Maintenance & Landscaping

#### How to Safely Hang Outdoor Lights: The Dos and Don’ts

Outdoor tree lighting requires a few extra steps to make sure they are safely decorated without damaging trees. Get a step-by-step tutorial with tips and tricks on how to put Christmas lights on your outdoor trees; as well as a few don’ts to keep in mind.

Back to our Blog

Subscribe to the "The Sapling," the Davey Blog's email newsletter, for the latest tips to keep your outdoor space in tip-top shape throughout the year.

### Get In Touch With Us!

We pride ourselves at Davey Tree on providing prompt, professional and personalized service from certified arborists that live, work and engage in your community. Contact one of our Davey Tree specialists for your residential, commercial, utility, or environmental needs.

## 3 Tips on How to Hang Lights on a Tall Tree Without Using a Lift

‘Tis the season to hang the wreaths and string the Christmas tree lights! Christmas lights are one of the biggest and brightest signs of the holiday season, and lights on a tall tree are always a sight to behold. While a decorated tree will forever catch people’s hearts and eyes, getting them ready can take a lot of preparation, especially when working with an oversized Christmas tree.

Of course, you can turn to a company like Christmas Light Installers LLC and our commercial or residential Christmas light installers. But there are also a few key tricks to follow and some important tips for putting Christmas lights on a large outdoor tree. Whether your tree is 12 ft. or 50 ft, and if you decide to go the route of a DIY installation, consider these tips to hang lights on a tall tree without using a lift.

Finding the Right Measurements

The first step to putting Christmas lights on a large outdoor tree is to find the right measurements. The last thing you want to do is hop on a tree without understanding how your lights will look or how many you’ll need.

Measure the circumference of the tree trunk, and estimate the height to the top of the tree. A relatively close guesstimate works fine in this case, but make sure you start from the base of the tree.

Once you have these figures, determine how far apart you want your lights to be. Two to three feet is usually a good distance, but you can go wider or closer. Divide the height of the Christmas tree by the length of how far apart you want the lights to be. Multiply this figure by the circumference you measure; now you know how many feet of lighting you need.

If you want to avoid a few calculations, a good rule of thumb is to use 100 lights for every 1.5 feet of the tree. Either way, before you put Christmas lights on a large outdoor tree, you must make sure you have accurate measurements.

Use a Painter’s Pole

The toughest part about a tall Christmas tree is not just getting up there but finding out how to make a beautiful design while suspended in mid-air. Sure, a friend can provide help, but there’s got to be some way to make your life easier, right? Fortunately, a painter’s pole is a great way to ensure those hard-to-reach limbs are lit.

Start by removing the roller so that the metal hook is exposed. You may need to purchase a hook, which you can find at most home improvement stores. Before you begin stringing, make sure your lights are plugged into an outlet and extension cord if you need one. You can then place the first strand of lights into the hook and slowly work your way around the tree. Pro tip: start from the bottom and work your way to the top, adjusting the pole’s length when needed.

Don’t have a painter’s pole? No problem! You can still put Christmas lights on a large outdoor tree with a makeshift pole. First, find two old brooms and saw off a clean edge on the first broom. Take two nails and drive them into the sawed-off edge, creating a V-shaped image that allows you to pull at the lights.

Finally, tape the two sticks together with duct tape, making them close enough to not wiggle but not so much that you don’t maximize the length of the two brooms. Best of all, if you need to put lights on a taller tree outdoors, you can extend the pole a bit longer with another broomstick!

This Home had a Magnolia tree’s trunks wrapped in LED mini lights. This service is called a “Trunk Wrap”.Use a Ladder

A ladder might be the best option if you’re working with a tree that exceeds the length the painter’s pole can reach. When using a ladder to decorate your tree, always try to have another person spotting you to ensure the ladder stays stable. Or you might consider calling one of Santa’s little helpers to join in on the fun!

When using a ladder, try decorating the tree as much as possible while on the ground. When you’re ready for a height boost, wrap the light strings into a ball so that you can unravel them as you go. This will also save you from climbing up and down the ladder as you run out of lights. Have your little helper walk the strings around the tree as you place them from limb to limb.

Remember, you don’t need every single branch wrapped. Occasionally, you or your helper can test the lights from up close and at a distance to see whether or not branches may seem overloaded with lighting.

Additional Tips for Putting Lights on a Tall Tree Outdoors
• Always assess the area for any safety or fire hazards when hanging lights outside.
• Check the lights to ensure they are for outdoor use before putting them up.
• Consider using LED lights to save energy.
• Make sure your light strands don’t have any missing or broken bulbs.

Also, remember not to hang outdoor lights in dangerous weather like rain or snow. If your extension cords run along important walkways, use tape to prevent them from tripping up your family or mailman.

If you feel like you’re having a tough time hanging your lights, you don’t have to do it alone! Christmas Light Installers LLC offers permanent Christmas lights that light your home throughout the holiday season and stay hidden on your walls the rest of the year. Give us a call today, and you won’t have to worry about having to put lights on a tall tree outdoors again!

What’s Better Than Hanging Lights Yourself? Get Professional Installers!

If you’re having trouble putting Christmas lights on a large outdoor tree, you don’t have to work alone. Fortunately, homeowners and businesses can light up their property with a simple call to Christmas Light Installers LLC. Our Christmas light installers in Indianapolis, IN, help you light your entire property with unique designs and various types of Christmas lights, all at an affordable cost. Contact our expert installers today to put lights on a tall tree outdoors without the hassle!

3 Tips on How to Hang Lights on a Tall Tree Without Using a Lift

## How to make the illumination of trees and shrubs in the garden

2021-06-29

Arranging the illumination of garden trees and shrubs is one of the interesting landscape design methods that allows you to create a particularly cozy atmosphere on your backyard plot, conducive to relaxation and pleasant pastime. There are many ways and tools for creating such a backlight, about them - in this article.

Such lighting looks natural and at ease, because it is from above that sunlight falls on the crowns of trees and shrubs. Artificial light is more saturated, it allows you to create an interesting play of highlights and shadows in the garden. Not only the plant itself, but also the territory of the garden adjacent to it will fall into the zone illuminated by lanterns.

It will be especially comfortable to be in such a space against the background of surrounding twilight or darkness. The option of lighting from above is relevant only for low plants, since it is physically almost impossible to illuminate large plants in this way.

Large-sized trees and shrubs with a beautifully formed crown or bizarre shapes look especially impressive when illuminated from below. To organize the backlight, the simplest lamps that can be installed in the ground or some elements of the landscape are suitable.

Light sources are located at a distance from a bush or tree that is equal to their height. The luminous flux is directed to the top point of the crown. The rays of light in this case will be able to highlight and favorably emphasize the foliage, bends and weaves of branches, the texture of the trunk.

If your backyard is surrounded by a hedge of conifers, you can position the lamps behind the trees, turning them so that the light rises up the trunk. Thanks to such illumination, the site at night will be decorated with the majestic silhouettes of firs and pines against the backdrop of a mysterious and romantic radiance.

Placing decorative lamps right among the branches of garden trees and shrubs is an unusual solution, somewhat bold, but very interesting. It will look especially advantageous on lush trees with medium-sized foliage.

Compact luminaires, fixed between the branches, will help to highlight the most attractive parts of plants or some decorative elements such as birdhouses, landscape ornaments, hanging flower pots. In order for lighting equipment to be invisible during the day, its elements should be small and dim. The wiring is carefully masked between the branches.

The method allows you to interestingly arrange the crowns of trees and shrubs, highlighting only their contours. This can be done using spotlights, garlands or LED strips. Particularly impressive in this design look hedges surrounding the site or dividing it into separate functional areas.

Landscape lighting can be arranged using the following types of luminaires:

• Classic lanterns - they are suitable for lighting from above, from the side or from below (for large sizes). Lanterns usually provide a uniform flood light that helps to highlight the entire plant against the background of the surrounding landscape.

• Hanging lamps - they are placed among the branches of trees and shrubs to beautifully illuminate their crown. These lamps are also used for decorative purposes.

• Floodlights, ground and ground lamps - such devices are suitable for creating lower illumination of garden trees and shrubs.

• Garlands - with their help you can effectively shape the contours of crowns and hedges or organize the illumination of plantings from the inside.

• Light figures - to illuminate the plantations, you can choose beautiful luminous birds, butterflies, dragonflies, tree animals. Figures of fairy tale characters will look interesting around trees and shrubs.

LED fixtures are the most effective for landscape lighting. They produce a high quality luminous flux, are the most economical and durable among other light sources.

You can also use incandescent bulbs in the garden, but this is a rather expensive option in terms of energy consumption and the frequency of failure of these bulbs. Another suitable type of lantern is solar-powered, but such luminaires work well only in sunny areas.

• To create street lighting, use luminaires with a degree of dust and moisture protection of at least IP65/66. Such devices are fully adapted to operation in open air conditions: they are not afraid of even strong showers and winds, as well as the ingress of the smallest dust particles.
• Choose tree and shrub lighting fixtures with LED light sources. If for some reason you decide to give preference to incandescent lamps, place the lamps no closer than 1.5 meters from garden plants.
• Purchase 12 volt low-voltage garden equipment whenever possible. Such devices are the safest, especially for lamps located near water.
• Before buying lamps, try to correctly estimate the required lighting power for your plantings. So, one powerful lantern will be enough to illuminate a tall tree with a compact crown, and for sprawling lush crowns, at least two light sources will be required.
• Lamps with cold light visually distance objects, with warm light they make them visually closer. This point is important to consider when considering the illumination of small gardens and suburban areas. But do not get carried away on the site using cold light sources, they can deprive the garden of natural colors and liveliness.

Illumination of garden plantings allows you to transform your site at low cost and create two completely different landscapes on it: one is the usual daytime landscape, and the other is unusual and even fabulous, which appears in the dark when the lights are on. Thanks to night illumination, you can extend the time of using the garden for almost the whole day, because now you no longer have to leave it after dark.

See models of outdoor lighting fixtures for landscape lighting

## Height of fixture suspension: At what height to hang lamps and a chandelier above the bed, dining table in the kitchen, in the bathroom, corridor

At what height to hang the chandelier? How far from the floor should the lowest point of the chandelier be? What is the distance between the chandelier and the floor? How to find the correct wiring exit point? The answers are not as simple as they might seem. It all depends on the height of the ceilings, the area and function of the room, and even on what the ceilings are made of.

► This is archival material. First published in 2017 and updated in 2020

Natalia Preobrazhenskaya | Uyutnaya Kvartira Bureau

What size should the ceiling lamp be? Measure the length and width of the room and add the two together. To make the room look proportional, the diameter of the lamp should be 1/12 of the amount received.

Natalia Preobrazhenskaya | Bureau "Uyutnaya Kvartira"

At what height to place the lamp

1. Above the table
The recommended height of the lamp above the dining table is from 71 to 89 cm. Based on the size of the tabletop (the larger it is, the higher the lamp). Long tables and bar counters already need several lamps in a row at a distance of no more than 1m from each other.

Private design

By the way : If the lamp has a height adjustment (example in the photo), the lampshade should “hang” at a distance of 30.5 cm above the table - otherwise you will hit it with your head.

RELATED…
How to: Illuminate the dining table

Natalya Preobrazhenskaya | Bureau "Uyutnaya Kvartira"

2. In the kitchen
Kitchen countertop lighting is usually placed along the bottom of the upper cabinets of the suite (usually at a distance of 60 cm from the countertop).

Natalia Pokrovskaya

If your kitchen does not have a top row, the lamp can be mounted higher than 60 cm. Check two distances:

• from the floor to the lamp should be no more than 180 cm;
• from and working surface to the edge of the lamp 71 - 86 cm. Bureau "Uyutnaya Kvartira"

3 . In the corridor
In the corridors and hallways, the lamps are hung so that there is at least 210 cm between the floor and the lamp.

Check: that is, he will wave his arms, raise them).

• Does the lamp interfere with the opening of the cabinet (this happens in the case of built-in furniture: upper tier swing doors).

Maria Lutsenko (MY YO Design)

Natalia Preobrazhenskaya | Bureau "Uyutnaya Kvartira"

4. In the living room
In the center of the room, the lamp should be hung at a height of 210 cm from the floor. But if you place the light above a coffee table or other piece of furniture, the distance may be less. The task is to make sure that the light of the lamps does not blind and does not interfere with movement around the room.

Marta Costa

In the photo: with a ceiling of 3 meters, a massive chandelier no longer interferes with movement. If the ceilings are 2.8 and below, this type of lamp should be placed strictly above the coffee table.

Natalia Preobrazhenskaya | Uyutnaya Kvartira Bureau

Anastasia Bondareva Design Studio

5. In the bedroom
The standard height of a lamp in a bedroom is 210 cm from the floor. If the lamp is hanging directly above the bed, make sure that if you kneel on top of the mattress, the distance from your head to the lamp will be at least 152 cm. Of course, this must be calculated on paper in advance.

Valeria Slivko | Sldesign studio

Important: Rooms with stretch ceilings have special requirements for the height of the chandelier. The web material is sensitive to high temperatures and can be deformed. Therefore, overhead models with a closed ceiling are not recommended at all, as they get very hot. Exceptions are lamps with LED bulbs.

The best option for stretch ceilings in rooms with low ceilings - chandeliers with crystal pendants or with open shades directed in different directions.

Natalia Preobrazhenskaya | Bureau "Uyutnaya Kvartira"

6. Bathroom
The most popular way of illuminating a bathroom is sconces located on the sides of the mirror. Recently, hanging lamps have been hung in the same way. Since they are used as task lighting and not general lighting, they should be hung at a 60° angle.