How to hide your tree stand


hide your tree stand Archives

Imagine sitting in your tree stand on opening morning. As the first rays of sunlight start shining through the autumn leaves, you hear a branch break. Just as you imagined, you spot a deer walking down the well-used trail you found earlier in the week. It’s a brand new stand site and the deer should have no clue you’re there. But as soon as it enters a slight clearing, its head shoots up and aims right at you. You didn’t make any noise and the wind is in your favor. But still, the deer turns and disappears faster than you can do anything to stop it. All because you didn’t take time to hide your tree stand with tree stand blinds. If you’ve hunted long enough, you’ve probably had an experience like this.

Whitetails are remarkable at spotting differences in their environment. Their eyes are amazingly adapted at finding things that stick out from their surroundings; a new tree stand, for example. In order to beat this amazing sense of theirs, you have to take a little more care to hide your tree stand when you hang a new stand. This often includes installing tree stand blinds. If you’re hunting unpressured private land deer, you can probably get away with less. But the steps below are almost a requirement for public land hunting these days.

It’s no doubt that ground blinds can be much more easily hidden than tree stands. They are low to the ground and can be covered with all manner of camouflage patterns and branches. But they can be more difficult to hunt deer out of sometimes. You don’t have the height advantage on your side, for one thing, which inhibits your prey detection and prevents any longer shots. But there are some things you can do with tree stand concealment to hide it just as effectively as a ground blind.

How to Hide Your Tree Stand

One of the first tips if you’re using a really old stand is to either get a new one or freshen it up. If there aren’t any safety concerns, then painting a tree stand or just installing tree stand blinds could do the trick to help it blend in better. Grab a couple cans of spray paint, in black and various shades of brown, green, and yellow. Next, collect some natural materials (e.g., grasses, weeds, branches, leaves, etc.) from the area you’re going to hunt. Spray a light background color, such as sage green, all over your stand. Then either sparsely lay some of the natural materials on top of the stand, or tie them down with some twine. Once they’re tight against the metal frame, spray a mustard yellow or brown paint over the top. Add some more materials over the top of these, and lightly spray a black color over what’s left. You can experiment with the colors and which sequence you spray them in, but focus on colors that match the season you’re hunting in. In other words, no bright green colors if you’ll be hunting in late autumn. You can quickly camouflage a deer stand with a couple cans of paint and a few hours.

One of the best deer stand concealment steps you can take is to simply take advantage of the natural cover around you. There are no synthetic materials that can beat the natural vegetation in an area in terms of camouflage value offered. That being said, some trees are better suited to hanging a new stand than others. For example, trees with multiple trunks or lots of branches work great since they offer so much natural camouflage and structure that you can hide in. Pines, cedars, and oaks come to mind as excellent choices since they generally have a dense branch structure and maintain their needles or leaves through most of the hunting season or year-round. These trees are excellent choices for hang on stands, since you can tuck them right into the branches. With a good set of camouflage clothing, you should stay pretty hidden.

Deciduous trees with bare trunks (e.g., aspens, maples, birch, etc.) are great for ladder stands, but you tend to stick out like a sore thumb without any ladder stand concealment. If you must hunt from a tree such as this, you should definitely use a tree stand blind kit or camouflage burlap. Wrapping the seat and platform of a ladder stand is a great way to at least hide your movements while in the tree. Using fabric with loose-cut leaves is even better since it adds a natural look and motion. These tree stand blinds are simple to carry with you while hanging stands, and do so much to hide your profile. Simply drape the fabric or ladder stand blind kit around the shooting rail and use twine or zip ties to secure it thoroughly. Leave a slit opening at the front so you can climb into the stand with all your bulky hunting clothing and gear. There’s nothing worse than trying to quietly slither through a narrow gap on opening morning, realizing that a knife is the only way you’re going to get into your stand.

While this definitely helps hide your movement from keen eyes, a large bulky shape in the sky among a bunch of bare trunks still sticks out to deer. Another way to really hide your tree stand involves a more three dimensional application. Real or fake branches are excellent to blend into the surrounding area. Using tree stand concealment branches can be done in two ways. The first is to collect some actual branches from near your stand, preferably live ones with leaves still on them for deciduous trees (oaks tend to hold onto their leaves longer than many others), or coniferous branches for a coniferous tree. The other is to stock up on fake Christmas tree branches when they go on sale at the end of the year. Obviously, these are more useful for coniferous trees. Either way, attach the branches to your stand with twine or zip ties, spreading them out evenly to hide your profile. You want enough branches so that it looks natural and blends in, but not so many that it sticks out (when’s the last time you saw a ball of branches extending every direction 20 feet up a tree?). And you definitely want to make sure to leave yourself ample shooting lanes for close-range bow shots. Too often, we don’t know when to stop and suddenly realize we can’t see the ground from a sitting position.

Height Matters

The final way to really hide your tree stand is not so much a mechanical add-on or fancy camouflage system of tree stand blinds. It simply involves hanging your tree stand higher. Climbing stands and lock-on stands makes this is easily doable. Well-educated public land deer have come to expect to see hunters at the typical 10 to 15 foot range off the ground. So if you can sneak up a little higher, say 20-25 feet, you’ll be further out of their peripheral vision. If you go much higher than that, your shot angle can be too severe to get a double lung pass-through. Make sure to stay safe while hunting higher and always use a hunting safety harness. And of course, pay attention to your state hunting regulations as some states have maximum allowable tree stand heights.

While you’re out deer scouting this summer, pay attention to the surrounding trees and think of ways that you could hide your tree stand better. Using all of the steps above whether it is natural cover or tree stand blinds, it should leave you pretty invisible to all but the wisest whitetails. You’ll need a little luck on your side to get close to them.

5 Ways to Camouflage a Deer Stand • Advanced Hunter

Non-hunters have the misperception that deer are defenseless against hunters, that they simply walk out in the woods with a six-pack and a lawn chair and start blasting away. They don’t understand that deer have very formidable defenses, they aren’t tooth and claw. Instead, they have their ears, eyes, and nose. And as every deer hunter knows, their visual acuity is superhuman.

Recent studies have shown that deer process visual stimuli much faster than humans, which has the effect of slowing down the action. This fact is especially true at sunrise and sunset. So it’s vitally important for success that your treestand and you sitting in it are well concealed. There are several effective ways to accomplish this, and we’ll take a look at some easy and affordable methods of tree stand concealment.

Quick Navigation:

The Basics Of Tree Stand Concealment

There are several fundamentals of concealing your presence to keep in mind whenever you are in your tree stand or moving through the woods to and from it.

  • Camouflage
  • Texture
  • Preparation
  • Stealth
  • Scent Management

Camouflage Everything – There was a time back in the day when camo for hunters wasn’t all that popular. The usual hunting outfit was a red shirt and brown pants. But that changed almost overnight in the 80s and suddenly camo clothing and accessories were everywhere. And there’s no doubt that that has been a significant advantage for hunters because it works. Today you can not only camouflage yourself but your weapon, your stand, the steps leading up to it, everything. All the gear that you can conceal should be.

Break Up Your Silhouette – That’s the primary purpose of camo obviously, but texture breaking up your form can be achieved with your natural surroundings, trees, limbs, terrain, etc. Anything you can use to break up that big solid man-sized silhouette will help.

Set Up Early – Give yourself plenty of time to move slowly and quietly to your stand area to allow the unavoidable noise and movement you’ll make to die down and the deer to get settled. Get up in the wee hours and moving to your stand while it’s still dark outside, it’s worth it.

Keep Quiet – A deer can hear you a long ways away. Always be as quiet as possible in the woods, and especially in your stand. Always look around carefully before you make a move, and then do it slowly and smoothly. Try to avoid jerky movements. And secure any gear that can rattle or clank when you move.

Eliminate Your Scent – Being up in a tree stand helps to keep your human scent above ground level, but you should take steps to minimize it as much as possible. Any sporting goods store will have scentless soaps and laundry detergent to wash yourself and your clothes with before a hunt. There are tons of covering scents available that can help a lot too. Consider bringing along a milk jug for bathroom breaks. Avoid smoking or anything else that produces a strong smell.

In short, use every weapon and tactic at your disposal to defeat the deer’s natural defenses.

Tree Stand Concealment Methods

To outwit the wily deer, you have to get resourceful. Here are some useful and informative videos to give you some great ideas and inspiration for improving your tree stand concealment this season.

1. PVC And Burlap Camouflage

This video shows an easy and inexpensive way to camouflage a fixed ladder treestand with a DIY treestand blind. Buy some PVC tubing and PVC glue at the hardware store and build a frame to sit on the platform area of your stand.

Then hang camo burlap or netting from the framework to conceal yourself, each of which is readily available at your local sporting goods store, and cut some viewports.

You could also do the same thing of course with some old sheets and sprayed on camo patterns, though the burlap is cheap enough you might not want to bother. You might also think about wrapping some grapevines or other brush around the ladder supports. Just make sure you don’t create a tripping hazard.

2.

Camouflage a Climbing Tree Stand

Here’s a hunter showing how he did a quick and easy camo job on his brand new Lone Wolf Assault II climber, one of the most popular climbing treestands ever made. All it takes is a few cans of Rustoleum flat spray paint and an ordinary kitchen sponge.

You’ll want to first primer coat the whole frame, and grey is a natural choice, then add some brown stripes horizontally across it. Put on the finishing touches of green paint daubed on with the sponge for an indistinct pattern.

Or through practice, you can make up your own distinct pattern. You’ll make a significant improvement in your stand concealment while protecting your investment.

3. DIY Deer Stand Skirts

Here’s how to make durable and long-lasting camo skirts for either a climbing stand or a dual ladder stand. This method also works for making a treestand canopy. This project is a little more involved and requires some skill with a sewing machine, but the results are worth it.

The first step is to buy a large section of heavy cotton camouflage fabric, which you should be able to find at any fabric store, along with some outdoors sewing thread and Velcro attaching strips.

Next, you’ll be using your sewing machine (or maybe talk the wife into doing it if you don’t know how) to reinforce the edges of the skirt by folding over a narrow strip and sewing it together. Attach Velcro strips along that edge to hang it from your stand.

Once complete, you’ll be able to hang your homemade treestand blind however you’d like from your position, to conceal your feet and legs, or even up higher if you prefer. If you take your time and do it right, these skirts will last for years of use in the woods.

4. Brush In Your Stand with Branch Holders

Brushing is one of the oldest tricks used by ground hunters everywhere, and it makes sense to take advantage of the natural cover in your tree stand too. As you can see, these days you can buy very inexpensive plastic branch holders that clip on to your stand and straps so that you can conceal yourself with natural foliage. This is so cheap and easy that every hunter should be doing it. Alternatively, if you want to do the poor man’s version, you can use zip ties and eye hooks to accomplish the same thing.

5. Camouflage Your Tree Sticks

If you prefer to use climbing sticks with your tree stand setup, you can disguise those too. Most of the sticks on the market today don’t come with very good camo, and this technique will work with any make or model.

It’s almost identical to the method used above to do a camo job on your tree stand. Just head out and buy some flat spray paint, grey, brown, and tan work well, and a regular sponge, and create your camouflage tree climbing sticks.

Remember that the objective is to break up their profile and to blend in with the tree bark background. You can even make it a family project like this hunter does. It will make a huge difference in your tree stand concealment.


With just a little bit of effort and ingenuity and a minimal monetary investment, you can effectively conceal a tree stand from alert deer and overcome their highly developed natural defenses. The result will be more successful hunts and more meat in the freezer.

How to install a Christmas tree correctly and attract good luck

After choosing a Christmas tree, it's time to think about where and on what to install it. You can buy a stand for a Christmas tree in advance at a store or make it yourself. In order for the tree to not prematurely wither and crumble, you will have to take care of it.

Selecting a location and preparing the tree for installation

First, you need to prepare the tree for installation and choose the right place for it in the room. A living tree does not like heat, so a place near a radiator, stove or fireplace is not suitable for it. Optimal positioning is a difficult task. The Christmas tree should not block the passage, at the same time it should be easy to approach, especially for children.

If there are pets in the house, it is almost impossible to hide the New Year's guest from them, except to enclose them with an aviary. Cats will be interested in toys, so you should not hang balls on the lower branches. You can cheat. Surely there is a thing in the house that a cat or dog is afraid of. For example, a vacuum cleaner. Put it near the Christmas tree, most likely, the animal will bypass this place.

There are no problems at all with an artificial tree: assemble, straighten the branches and decorate. With live spruce or pine, you will have to tinker a little. They don’t bring it into the house immediately after the frost, letting it stand on the balcony, veranda or in the stairwell for a couple of hours. Shake the tree lightly to loosen the weak needles.

Without water, just in a stand, a Christmas tree can stand for a week (needles will be collected in bags), or it can crumble in a couple of days. It all depends on when it was cut down, how it was stored, at what temperature and humidity. If you want the tree to please you all the New Year holidays, you will have to take care of it.

The trunk should be cleaned of dirt and a fresh cut should be made at the bottom: file down 2-3 cm or remove the bark with a knife by 10-15 cm, so that the tree absorbs water and top dressing better. If the branches are not the same size, but you want the tree to look round, some of them can be shortened.

How to choose a stand for a Christmas tree

To set the Christmas tree in its stationary position for the entire holiday season, you will need a stand and preferably a water tank. What are the options for the stand:

  • ready, bought in the store;
  • hand-welded cross;
  • office chair or fan leg;
  • stool with water tank;
  • sand bucket.

Today, a Christmas tree stand with or without a water tank can be bought in the store for every taste and color. For small trees, less than a meter, an ordinary wooden cross will do. More solid copies of the holders have a metal pipe. Combined stands are metal supports in a plastic container with clamps. There are rotating stands. It all depends on the capabilities of your wallet.
For those who are not looking for easy ways, we offer you to make a heavy and stable cross for the Christmas tree yourself. You can even use the leg of an old office chair. The main thing is that the diameter of the barrel fits.

A sand bucket is a great alternative to a Christmas tree stand. Moreover, the experience of many generations of Soviet families has proved that such a design can protect even a tree over 2 meters high from unforeseen falls. A plastic or enameled bucket of 20 liters is taken, a Christmas tree is placed in it, covered with sand and rammed. Water is added to the soil once a day. The bucket itself can be draped with cotton wool, cloth or tinsel.

Important: taking sand, stones or soil on the banks of rivers, lakes, in a forest or park without the permission of environmental authorities is an offense. It is desirable to hide the entire structure under the New Year's decoration. Sometimes you can find the option of installing a Christmas tree in a bucket with plastic bottles. The method is suitable for small trees: the lower the weight of the base (stand), the more unreliable the whole composition. Another handy tip: for lush Christmas trees over 2 meters high, regardless of the stand, consider additionally fixing it with guy wires to the wall to avoid accidental tipping.

Where to install a Feng Shui Christmas tree

As the brightest New Year symbol, the Christmas tree serves as an activator of your good luck and prosperity in the New 2022. To do this, it must be necessarily alive and preferably high.

Experts in Chinese metaphysics advise placing a Christmas tree in an apartment in the northeast corner or southeast part of it. These are universal directions for a Feng Shui Christmas tree in 2022, promising health, financial prosperity and good luck in all matters.

The southern direction is suitable for creative people, and the northern direction is for those who want to strengthen their relationship in marriage or find a soul mate next year.

How to keep your Christmas tree fresh longer after purchase - Articles

Content:

  • How to care for a Christmas tree?
  • How to keep your Christmas tree fresh before installation
  • Christmas tree installation
  • Water supply to stem
  • Caring for the tree after installation
  • Christmas trees in a pot
  • What to do with the Christmas tree after the holidays?

How to care for a Christmas tree?

Everyone who would like to buy a real live Christmas tree for the New Year thought about how long the Christmas tree will last at home, and how many days before the holiday you need to buy it?

We answer - the life of Christmas trees, firs and pines is different, but none of them will stay warm in your house for more than two weeks.

Russian and Norwegian Christmas trees begin to crumble after about 5-7 days, pines stand a few days longer, firs do not crumble, but gradually dry out and change the color of the needles, it becomes paler. For more information about the properties of New Year trees, in our article "Types of New Year Trees."

This applies, of course, to trees already unpacked and installed in a warm room. However, it is possible to buy spruce long before the New Year and keep it fresh for the holiday, up to a month or more. We'll show you how.

Christmas tree in the interior

How to keep your Christmas tree fresh before installation

The first thing to do is to decide on the date when you need it, already beautiful and dressed up. We recommend installing Danish Spruce, Fraser Fir, Canadian Pine 5-7 days in advance, and Russian and Norwegian Christmas Trees 3-5 days in advance.

All the time until this moment, it is better for the tree to stay in a cool place, at a temperature not higher than 5-10 degrees Celsius, with a minimum amount of light and, preferably, with high humidity.

The key to success is to reduce the amount of moisture evaporated from the plant. For this purpose, a garage or an unheated balcony is perfect. In our experience, there was a case when the Christmas tree remained green and fresh even six months after purchase. And one of our employees set up a Christmas tree on March 8, as an unusual gift for loved ones.

By the way, live Fraser fir comes to Russia from North America, from where it is transported for 45 days in cold stores across the ocean, with a minimum amount of light and with 100% humidity.

This does not affect its quality in any way, since Fraser Fir is considered the highest quality Christmas tree that can be bought in our country for the New Year: it stands for a very long time, does not crumble at all, and the branches of this fir are so strong that they can withstand even very heavy toys and real candlesticks.

Tree seedlings

Christmas tree installation

The cut Christmas tree begins to dry out only from the moment it gets into heat and the process of “drying” begins, the evaporation of moisture from the needles, so after installing the Christmas tree, you need to provide it with a regular supply of water to the trunk, and cool, humid air.

A place for a Christmas tree is suitable away from open flames, electric heaters, radiators and other heat sources. It is very good if the room is sometimes ventilated in order to slightly lower the temperature, and the air is regularly humidified.

After unpacking, the tree must be shaken off dry needles. A certain number of such needles should not scare you, this is quite normal, since spruce branches rub against each other during transportation and packaging. The total mass will still remain green.

Separately, it is worth mentioning that if there is a severe frost outside, less than 15 degrees, then the needles and twigs become very fragile and can be easily damaged. In such weather, we do not recommend disturbing the live spruce branches once again immediately after you brought it home. It is better to hold it for the gradual adaptation of the tree to room temperature, and only then unfold it.

Tree nursery

Water supply to the shaft

The next thing to do is to ensure a regular supply of water to the trunk. In order for the tree to better absorb water, the trunk is cut down 2-3 cm from the log house or notched with a knife to form a fresh cut and a larger area for absorbing moisture.

When delivering a Christmas tree from our online store, this is done without fail, and at our Christmas tree markets - at the request of the buyer. If you do it yourself, try not to cut the trunk at an angle, such a tree will be difficult to establish, and also do not accidentally cut the bark above the water level - this will greatly reduce the amount of moisture absorbed.

You can use special Christmas tree stands with water tanks. In them, the Christmas tree is securely and quickly fixed in the desired position, and it is easy to add water as it evaporates. We also recommend using hydrogel - a special tool for retaining moisture.

Trees on stands

Tree care after installation

All trees crumble differently. The Russian Christmas tree, as well as the European (Norwegian) spruce, will begin to lose needles in a few days, the Russian and Canadian pines stand a little longer, their needles may dry out, but if they are not disturbed, they will not crumble much, especially in Canadian pine. And, for example, Danish spruce (Nordmann fir) and Fraser fir do not lose their needles at all, they dry out right on the branches, only slightly changing color. You can take them outside after the holidays, losing perhaps 10 percent of the needles.

Spruce needles

Potted Christmas trees

There is an option to do without shedding needles at all - this is to buy a spruce in a pot. The price of this Christmas tree will be higher than that of a cut tree, but it will not give you any trouble with cleaning. This is a beautiful, well-wintering, world-famous ornamental plant that can be planted in the spring in the yard or at their summer cottage. See also "All about spruces in containers"

The higher the air temperature in the room, the sooner your cut spruce will begin to crumble. At a temperature of 10 degrees above zero, the New Year tree will stand for a long time, up to a month. But in winter it is quite hot in our apartments, and every 5 degrees increase in temperature reduces the life expectancy of spruce by 1 day. That is, if your house has 28-30 degrees, then with all the tricks, the tree will stand for only a few days. We advise you to regularly ventilate the room in which your Christmas tree stands in order to lower the air temperature by at least a few degrees. You should also not forget that electric electric heaters dry out the air a lot, so it is better not to use them where a live Christmas tree is installed.

Spray the branches as often as possible with a spray bottle, but you need to do this only after making sure that the electric garland on it is turned off!

There are also special products for extending the life of Christmas trees - in the form of water-soluble tablets (1 tablet per 2 liters of water) or liquid fertilizer (2 caps of the product per 1.5 liters of water). We will not claim that this is a panacea for shedding, such products prolong the life of cut fir trees by only 2-5 days, but, as a rule, this is enough to celebrate the New Year holidays and spend the weekend comfortably without thinking about urgent cleaning.


Learn more