How to make a mesh tree topper


How to Make a Designer Tree Topper Bow with Multiple Ribbons

Alright guys, I’m going to come right out and confess it. I don’t really like tree topper bows. They’re just not my style. But a lot of my viewers have been asking for a tutorial, so I’ve got a fun little challenge today. How would I make a tree topper bow with multiple ribbons if I was making one for myself? 

This post may contain affiliate links for your convenience. Click here to read my full disclosure policy.

Now, I want to start by saying that when I make bows for my own home, I don’t usually measure. I just do what I think looks natural. I’ll give you some examples in the video, but for the written tutorial below, I’ve given approximate measurements. 

Let’s get started!

Supplies for Designer Tree Topper Bow with Multiple Ribbons

4” Ribbon 
2.5” ribbon
Additional ribbons as desired
Zip tie
Scissors
Craft Mat 
Rustic Wire

Most of the ribbons I used in this tutorial came from Carolina Pottery. I also recommend looking at Trendy Tree.

Steps for Making Your Tree Topper Bow

Step 1: Forming the base of the bow

Start by unrolling some of the 4” ribbon and measuring a tail of about 24”. From there, measure about 21-22” for the first loop. Pinch and pleat it between your thumb and index finger. 

Now, y’all know that whenever I’m teaching bow making, I always emphasize that you’ll start by pinching the ribbon just between two fingers. Then it gradually shifts back toward your palm as you add more loops. 

But since we are using such a wide ribbon, this one is going to be a little different. You can see in the video that even after the first loop, I am not keeping it pinched tightly between my finger tips. There’s just too much material there. 

Now twist the ribbon and continue adding loops of the same size. 

The number of loops you need to make really just depends on personal preference. I don’t like mine to look too full and take away from the beautiful tree, so I am only doing four loops of the first ribbon.  

Step 2: Adding the second layer of ribbon

Next, unroll a bit of your 2.5” ribbon. Measure and 18” tail and add in three 16” loops, pinching and twisting your working ribbon between each loop. These should all be above your 4” ribbon. Finish off with another 18” tail. 

If you were going to add an additional accent ribbon like I do in the second bow of the tutorial video, this would be the time to do it. Check out the video tutorial for additional instructions.

For now, we are going to make the simple version of the tree topper.

Step 3: Placing Streamers and Making Adjustments

I like my tree topper bows to look nice and airy, but I don’t think it’s quite done yet. So instead of adding more loops, I’m just going to go ahead and add in a couple streamers to the back. 

Cut a streamer of each ribbon and pinch it in the middle then add it to the bottom of the bow. I did not measure these streamers, but I would suggest about 24” 

However long you want your tails, double that.  

Now, before you secure it, make sure all the tails are in the back and the bows laying nicely together in the front. 

Step 4: Securing the Bow

Turn the bow over and slide a zip tie underneath your index finger, Wrap it around the bow and tighten until all the loops and tails are secure. 

Step 5: Trimming the Ends

Now, just finish off your tree topper by trimming the ends of each tail. I like to fold them in half and dovetail them for a tree topper. I think it’s a more festive finish than just cutting on an angle. 

And that’s all there is to it!

Watch the video tutorial below to see me make 3 different versions of this bow. 

Tree Topper Bow with Multiple Ribbons – Video Tutorial

If you enjoyed this and want to learn to wreath the professional way,
try our Wreath Making 101 Workshop!

Happy Wreathing,

Julie

If you enjoyed this post, you might also like:

How to Make a Christmas Wreath Bow

How to Make a Tree Topper Bow

Christmas Lantern Topper Tutorial

Liked this Tree Topper Bow Tutorial? Pin it for later!

Christmas Tree Topper Idea (using the Messy Bow)

Need a fresh Christmas Tree topper idea? Using scrap fabric or extra ribbon along with some burlap material makes this a whimsical, non-traditional idea for a tree topper. This bow is so easy that anyone can make one to use on a Christmas tree or anywhere an added pop of color is needed. See how to create your own tree topper bow in this tutorial.

A tree-topper or tree topper is typically a decorative ornament placed at the top otherwise known as the “crown” of a Christmas tree. They are usually the last decoration to be placed on the tree and sometimes there is a special ceremony involved.

I have fond memories of placing a bright, multi-colored star on the top of our Christmas tree when I was little. It was so much fun. We played music and drank hot cocoa and made an event out of decorating the tree. Adding a tree topper to a Christmas tree dates back centuries and is a fun way to personalize your tree. Ideas include an angel, star, finial, Santa, or a bow!

This blog post contains affiliate links. The opinions are wholly my own from my own experience. I may earn a small commission from clicks through to the websites that end in a purchase.

What You’ll Need to Make a Tree Topper Bow

  • burlap material
  • 4-5 various choices of ribbons with at least one of them wired
  • zip tie
  • optional embellishment or bling
  • hot glue gun and glue
  • scissors

Be sure to PIN this for later!

Watch the YouTube Video Tutorial on How to Make a Messy Bow Tree Topper

If it’s easier for you to watch a video, then I’ve got you covered here with this easy-to-learn step-by-step instructional video tutorial on how to make your very own messy bow. Be sure to subscribe while you’re at it!

Instructions for Making a Christmas Bow Tree Topper

  1. Cut the burlap and ribbons into approximately 2-4″ wide by 12-16″ long strips. The length of the ribbons will determine the size of the bow.
  2. Starting with a burlap piece, lay the ribbon strips down one by one in a criss-cross pattern varying the ribbons as you go.
  3. Taking the zip tie, wiggle it underneath the stack of ribbons until it comes out on the other side and then zip it half way.
  4. Flip the ribbon stack over and bring the zip tie around the the back to zip it tight. Trim the zip tie.
  5. Pull each ribbon strip towards the center until you have a pom pom shape for your bow.
  6. Take the stack in your hand like a bouquet and using the scissors, trim to the desired length evening up the strips.
  7. Shake out the bow to release the strings.
  8. Glue an embellishment in the center like a piece of vintage jewelry or bling.
  9. Use an extra zip tie to thread through the original zip tie to attach to the top of your tree.

Messy Bow Tree Topper with Bling

This is how a simple vintage brooch or rhinestone embellishment would look in the center of your messy bow tree topper. It gives it just the right amount of extra sparkle!

Stunning and gorgeous and all handmade by YOU!

Messy Bow Tree Topper Without Bling

This is how it would look without bling in the center of your messy bow tree topper. This look is traditional and simple.

This is a close up look at the tree topper bow with all it’s colors and uniqueness!

What are the Most Popular Tree Topper Ideas?
  • A Christmas angel is the most common tree-topper. Here are some of my favorite angel tree topper ideas!
  • A star is another popular choice for a tree topper. The star symbolizes the Star of Bethlehem that led the shepherds to the manger.
  • The snowflake is a little less traditional of a tree topper idea; but snowflakes still a popular choice.
  • Father Christmas or Santa are also popular tree-topper ideas. There are so many to choose from out there; I picked a few and put them here.
  • Finials are a beautiful way to top a Christmas tree. They come in so many shapes, colors and sizes. These can be plastic or blown glass. Make sure your ceiling is high enough for one of these though.

How to choose the right tree topper

When choosing a tree topper, there are a few things you’ll want to keep in mind. First, think about the overall look you’re going for. Do you want something traditional or modern?

Next, consider the size of your tree. If you have a small tree, you’ll want to choose a smaller topper. For a large tree, you can go with a bigger topper.

Finally, think about what kind of materials you want your topper to be made out of. Glass and metal are popular choices, but there are also many fabric and plastic toppers available.

No matter what your style or budget, there’s sure to be a tree topper that’s perfect for you!

Here are a few of my favorite tree toppers below:

Turn on your JavaScript to view content

Tips for storing your tree topper

When it comes time to take down your Christmas tree, you’ll want to be careful with your topper. Glass and metal toppers can be fragile, so it’s important to wrap them up carefully.

For fabric and plastic toppers, you can just fold them up and store them in a box. Make sure to label the box so you know what’s inside when it comes time to decorate next year!

With a little bit of care, your tree topper will last for many Christmases to come!

The History of Tree Toppers

The first recorded use of a tree topper was in the 15th century in Germany. Trees were often decorated with fruit, nuts, and candles. The candles were used to represent the stars in the sky.

The first Christmas tree topper was made out of glass and was shaped like a star. It was created in 1846 by German glassblower Hans Greiner.

The first electrically-lit tree topper was created in 1903 by Edward H. Johnson, the founder of the Edison Illuminating Company. The topper was a replica of his company’s light bulb.

Tree toppers became more popular in the United States in the 1920s and 1930s. Many different designs were created, including angels, Santa Claus, and stars.

Today, tree toppers come in all shapes and sizes. You can find them made out of glass, metal, plastic, or even fabric. There’s sure to be a tree topper that’s perfect for your holiday decor!

More Creative Ways to Decorate your Christmas Tree
  • Gnome Ornaments
  • Easy DIY Christmas Messy Bow
  • Easy Mop Head Ornament
  • Buffalo Plaid Hoop Ornament
  • Movie Theater Themed Christmas Tree

More Ideas for Using Bows in your Christmas Decor
  1. Gorgeous Wreath for Christmas using Bows
  2. Floral Christmas Centerpiece with Bows
  3. Cute Bows Perfect for Stockings
  4. Burlap Bows for Christmas
sign up for my emails

If you love these kinds of DIY ideas, you need to be getting my emails, friend! Each week I send out a couple of emails that include updates, crafts, shopping experiences, and decor inspiration. Be sure to get yourself signed up HERE.

I can’t wait to meet you! Leave your thoughts below in the comments, please… BTW— Life is short—Enjoy the mess!

Print

5 from 1 vote

Christmas Tree Topper Idea

This Christmas tree topper idea is so easy that anyone can make one. See how to create your own tree topper bow in this tutorial.

  • burlap material
  • ribbons
  • zip tie
  • embellishment optional
  • hot glue
  • Cut the burlap and ribbons into approximately 2-4" wide by 12-16" long strips. The length of the ribbons will determine the size of the bow.

  • Starting with a burlap piece, lay the ribbon strips down one by one in a criss-cross pattern varying the ribbons as you go.

  • Taking the zip tie, wiggle it underneath the stack of ribbons until it comes out on the other side and then zip it half way. 

  • Flip the ribbon stack over and bring the zip tie around the the back to zip it tight. Trim the zip tie.

  • Pull each ribbon strip towards the center until you have a pom pom shape for your bow. 

  • Take the stack in your hand like a bouquet and using the scissors, trim to the desired length evening up the strips. 

  • Shake out the bow to release the strings.

  • Glue an embellishment in the center like a piece of vintage jewelry or bling.

Toppers and inserts for cakes, cupcakes, bouquets and gifts in Moscow

production cost:

from 150 rubles.

production time:

from 1 day

additionally:

Plywood toppers from 150 rubles / piece PVC toppers from 150 rubles / piece Plexiglas toppers from 180 rubles/piece

Toppers and decorative inserts to order

We offer toppers made of various materials for decorating festive attributes - cakes, bouquets, flower arrangements, gifts, dishes with delicacies. Plastic and acrylic, which is used for the production of toppers, is non-toxic and safe for food contact and human health.

Toppers are decorative items on a stick that are inserted into confectionery, bouquets and so on. At the top of the topper there is an ornament or text - for example, the name of the birthday person, congratulations on the holiday, words of gratitude, apologies, wishes. At corporate events, company logos, slogans, mottos rise on toppers. Also, with the help of toppers, you can designate places for placing guests at the tables.

Types of toppers

Toppers are inserted into cakes, bouquets and various gifts. For their manufacture, polystyrene, PVC, plexiglass, and sometimes thin plywood are used. The material is selected depending on the purpose of the topper, its design, the required strength. You can order inserts from all listed materials in any design from us.

The image on the top of the stick is cut out along the contour and may have rather small details - for example, thin elegant text with monograms, outlines of various objects. It can also be printed with a vinyl film with full color printing, which allows you to add any image to the topper.

Cake, cupcake, cupcake toppers

Decorative inserts on a stick decorate confectionery at weddings, birthdays and other celebrations. At the top, a figured name of the birthday man, congratulations to the newlyweds, wishes can be placed.

Materials for making toppers are lightweight, so they won't damage dessert or pastries, and a thin stick is easily and accurately inserted into cream or dough.

Materials safe for food contact.

Toppers for flowers and gifts

Small inserts with congratulations and wishes accompany bouquets, gift compositions, sets. They can replace postcards and cards - contain text, names, funny inscriptions.

Toppers for non-edible items can be made from any material, but in the case of flower bouquets it is desirable that the sticks be water resistant.

Party Toppers

Bouquet Toppers

You can order toppers from us for any event - for a wedding, corporate meeting, birthday, March 8, anniversary and so on. We also offer urgent production of toppers if you need them during the day. In our arsenal we have high-quality materials in our own production, vast experience of professionals, responsibility for the timing and level of implementation.

To order toppers and other products for the holidays, please contact our managers in a way that is convenient for you.

how to make an order?

-1- Contact us

Call

+74952305017 9000

Order a return call


Write:

[email protected] Art.ru 9000-2-2-2-2-2-2-2-2- SPECIFY

PRODUCT TYPE

~

QUANTITY

~

DIMENSIONS

~

MATERIAL

-3- Send the task by mail

to the box:

[email protected] ru


indicate in the letter:

No. phone 2

Contact person (name)

Delivery address 9000

22 -four- agree on the layout

After all the changes, write to us


IN THE OFFICE:

Moscow, m. Kuzminki st. Zelenodolskaya 32 K.3


In the courier:

At the address of delivery

Call

+74952305017 2 Order the Counting Bell 9000


Write:

9000 AFOP-RWP-RWP-RWP-RWP-RWP-RWP-RWPORATOUR

PRODUCT TYPE

~

QUANTITY

~

Dimensions

~

Material

per box:

[email protected] 3


indicate in the letter:

No. phone 9000 9000 9000 Contact person (FUO)

Delivery address

After all the changes, write to us


"DESIGN APPROVED!"

CASH IN THE OFFICE:

Moscow, m. Kuzminki st. Zelenodolskaya 32 k.3


on a Sberbank card:

5469 3800 3863 6154

Batin Vitaly Stanislavovich


b/n Translation on account:

Send us details

in the office:

Moscow m. Kuzminki st. Zelenodolskaya 32 k.3


COURIER:

at the delivery address

quick order

reviews of our clients

Maxim L., OOO "PIK-Comfort"

I can recommend Windprof LLC as a reliable contractor for advertising and interior products!

read all

Evgeniy Ratnikov, LLC "FSK LEADER"

An excellent company, we have been working with it for more than a year, we print printing products in large volumes, there were no problems, the team is always friendly, polite, always ready to get into position. Well done guys keep it up.

read all

V.A. Kondrashova, LLC "ArDiAy Kalcher"

We would like to express our sincere gratitude and deep gratitude to you and the entire staff of Windprof LLC for the fruitful cooperation, and thank you for the timely, efficient and high-quality execution of orders. We look forward to further fruitful cooperation!
View thank you letter

read all

A.A. Terennikov, NEW LIFE Company

The NewLife company thanks the team of Vainprof LLC for the prompt work and personal attitude. We will continue to use your services with pleasure and recommend Wineprof to all our partners.
View thank you letter

read all

Alena Tremaskina, Boutique-Atelier CHERRY Fashion

I ordered promotional products from the Windprof company. Design layouts were done sooooo quickly! From the first time and straight to the point) All the work is super! Thanks a lot. Let's turn again)

read all

ADVANTAGES OF THE COMPANY

Quick calculation of the order

Modern equipment

Qualified specialists

Work experience

Full production cycle

High quality

Designer services

Installation of products

Order delivery

Work guarantees

Discount system

Short deadlines

our clients

Mattress covers, toppers for what

are needed

Mattress covers "Ormatek" - a unique solution with which you can improve the quality of sleep without significant financial costs, increase the life of a mattress or sofa and ensure their hygienic cleanliness. In the manufacture of Ormatek mattress covers, materials such as periotec, latex coconut coir, natural latex, Memorix are used. Therefore, the use of mattress covers allows you to change the rigidity of the bed and enhance the anatomical or orthopedic properties, depending on the preferences of the buyer and the chosen model.

Thanks to the convenient fastening system, the mattress topper can be securely fixed both on the mattress and on the sofa.

In order to sleep comfortably, use Ormatek mattress toppers!

Mattress cover Optima

Mattress topper Optima allows you to reduce the firmness of the mattress and make it softer. Production material - periotek. The mattress pad has 4 fasteners at the corners, securely fixing it on an orthopedic mattress or sofa. HEIGHT - 3 cm.

Moisture resistant mattress pad Dry

Dry moisture-resistant mattress cover protects the cover of the orthopedic mattress from premature wear, moisture and dirt. Guarantees compliance with the standards of hygienic cleanliness. The mattress cover is put on with a "cap" on the mattress according to the principle of "sheet on an elastic band", which ensures reliable fastening. A similar mattress pad with a smooth knit surface - Dry Light, with a soft velor surface - Dry Plush, a mattress pad for mattresses with increased height from 30 to 42 cm - Dry Big.

Simple Plus mattress topper

Simple Plus Mattress Pad with burlet in bleached cotton fabric and hypoallergenic fiber (mattress pad can be washed at 30 C)
Effect: protection of the mattress from dirt around the entire perimeter, including the ends (puts on like a "hat") for mattresses from 17 cm to 25 cm; protection of the mattress from premature wear, which significantly increases the useful life of the mattress; increase the comfort of the bed due to the content of hypoallergenic fiber in the mattress cover. HEIGHT - 0.5 cm.

Mattress cover GOLF is made of voluminous soft-cream colored jersey, provides a hygienic bed and facilitates mattress care. The mattress cover is securely fixed on the mattress (dresses like a "hat") and protects the surface from premature wear. (mattress cover can be washed at 30 C) HEIGHT - 0.3 cm. There are 3 types of mattress toppers according to the height of the mattress boulette (sidewall) from 16 to 45 cm.

Mattress cover Season

Double-sided mattress topper Season is created taking into account the seasonal temperature difference. The mattress cover is quilted on the “winter” side with merino wool, which reliably retains heat, and on the “summer” side, with natural cotton-based material, which gives coolness and removes excess moisture. Suitable for models of sofas and armchairs with a roll-out mechanism and mechanisms such as "Dolphin", "Book", "Trio", etc. The mattress pad has 4 fasteners at the corners, securely fixing it on an orthopedic mattress or sofa. HEIGHT - 3 cm.

Mattress cover Mix

Double-sided mattress pad allows you to adjust the firmness of the bed according to the individual preferences of the sleeper. On the one hand, natural latex is used as a filler, which provides softness to the mattress, on the other hand, latex coconut coir, which gives rigidity. The mattress pad has 4 fasteners at the corners, securely fixing it on an orthopedic mattress or sofa. HEIGHT - 7 cm.

Massage mattress pad

Mattress cover Massage allows you to adjust the degree of comfort of the mattress and improve its anatomical properties. Orthopedic mattress cover Massage has the property of micromassage due to the cutting of the material. Suitable for models of sofas and armchairs with a roll-out mechanism and mechanisms such as "Dolphin", "Book", "Trio", etc. The mattress pad has 4 fasteners at the corners, securely fixing it on an orthopedic mattress or sofa. HEIGHT - 4 cm.

Mattress topper Max

Mattress topper Max allows you to change the degree of firmness of the mattress to moderately soft. Production material - natural latex. The mattress pad has 4 fasteners at the corners, securely fixing it on an orthopedic mattress or sofa. Suitable for models of sofas and armchairs with a roll-out mechanism and mechanisms such as "Dolphin", "Book", "Trio", etc. HEIGHT - 4 cm.

Mattress cover Lux

Mattress topper Lux increases the rigidity of the mattress and gives it additional orthopedic properties. Production material - latex coconut coir. The mattress pad has 4 fasteners at the corners, securely fixing it on an orthopedic mattress. HEIGHT - 4 cm.

Mattress cover Lux Hard

Mattress topper Lux Hard enhances the rigidity of the mattress and its orthopedic properties. The filling is latexed coconut coir and Bi-cocos. Equipped with 4 fasteners at the corners, securely fixing it on an orthopedic mattress or sofa. A more rigid version of the Lux mattress topper. HEIGHT - 4 cm.

Mattress pad Perina

Mattress pad Perina reduces the stiffness of the mattress, thanks to the material with the effect of "shape memory". The mattress pad has 4 fasteners at the corners, securely fixing it on an orthopedic mattress or sofa. Suitable for models of sofas and armchairs with a roll-out mechanism and mechanisms such as "Dolphin", "Book", "Trio", etc. HEIGHT - 11 cm.

Mattress covers for round mattresses.

Different types of mattress covers for round mattresses - moisture resistant or cotton to protect the mattress from dirt.

Mattress covers Rayton

Various types of Rayton mattress toppers - for adjusting the degree of rigidity and comfort, hygienic, moisture resistant.

Softy Plus sofa mattress

Softy Plus is suitable for models of sofas, armchairs and folding beds with a folding mechanism such as "Sedaflex", "French folding bed", "Accordion", etc. It can also be used to complete ordinary beds and folding beds of a classic design (doubling type). Allows you to organize a bed of medium hardness. The Softy Plus mattress is conveniently attached to the bed and folds together with the transformation mechanism. Made from Orto-foam (artificial latex) - a modern environmentally friendly synthetic filler that does not cause allergies. HEIGHT - 6 cm.

Konfy sofa mattress

Konfy is suitable for models of sofas, armchairs and folding beds with a folding mechanism such as "Sedaflex", "French folding bed", "Accordion", etc. It can also be used to complete ordinary beds and folding beds of a classic design (doubling type). Allows you to organize a relatively hard bed. The Konfy mattress is conveniently attached to the bed and folds together with the transformation mechanism. It is made of Orto-foam (artificial latex) of increased density - a modern environmentally friendly synthetic filler that does not cause allergies. HEIGHT - 7 cm.

Prima Plus sofa mattress

Prima Plus is suitable for models of sofas, armchairs and folding beds with a folding mechanism such as "Sedaflex", "French folding bed", "Accordion", etc. It can also be used to complete ordinary beds and folding beds of a classic design (doubling type). Allows you to organize a comfortable soft bed. The Prima Plus mattress is conveniently attached to the bed and folds together with the transformation mechanism. Made from natural latex and Orto-foam. HEIGHT - 7 cm.

The main purpose of the mattress topper "ASKONA" is to regulate the degree of comfort of the bed. With it, you can make the mattress harder or softer, depending on your preferences, enhance its orthopedic properties and your sleep will become much calmer. The mattress cover is easily fastened on your mattress, Topper - does not "slip" and does not wrinkle. This is an economical way to make your sleep magical, to create exactly the level of comfort that you dream of!

Mattress cover Nika

Thin mattress pad made of environmentally friendly materials. Protects the mattress from dust, accidental leakage of liquids. Gives the bed extra comfort. Hypoallergenic. The mattress pad has 4 fasteners at the corners, securely fixing it on an orthopedic mattress or sofa.
Effect: reduces the firmness of the mattress. Suitable for models of sofas, armchairs and folding beds with a folding mechanism such as "Sedaflex", "French folding bed", "Accordion", etc. HEIGHT - 2 cm.

Top Foam 1

Top Foam 1 is ideal for smoothing the sleeping surface. The product is made of highly elastic orthopedic foam and can significantly increase the comfort level of the bed. Also available is a higher version of this mattress topper (4 cm) - TOP Foam 2.
Effect: smoothes unevenness, does not affect the rigidity of the bed. Suitable for models of sofas, armchairs and folding beds with a folding mechanism such as "Sedaflex", "French folding bed", "Accordion", etc. HEIGHT - 3 cm.

Topper Massage

The Topper Massage mattress topper not only perfectly levels the sleeping surface, but also gives it more elasticity. The product is made of hypoallergenic artificial latex with a special relief that provides the body with a micro-massage effect.
Effect: micro-massage of the body, gives elasticity to the bed, smoothes out unevenness. Suitable for models of sofas, armchairs and folding beds with a folding mechanism such as "Sedaflex", "French folding bed", "Accordion", etc. HEIGHT - 5 cm.

Topper Base

Comfortable mid-height topper perfectly adapts to the sleeper's body. The mattress pad has an average level of rigidity and is able to noticeably even out the unevenness of the bed. Topper Base is made from high-density hypoallergenic foam Orto Fhoam and is ideal for both sofas and to increase the comfort level of orthopedic mattresses.
Effect: increases comfort level, smooths out unevenness. Suitable for models of sofas, armchairs and folding beds with a folding mechanism such as "Sedaflex", "French folding bed", "Accordion", etc. HEIGHT - 6 cm.

Topper Cocos

Reversible topper - a versatile sleeping solution. On the one hand, orthopedic foam is used as a filler, which adapts to the body of the sleeper, providing softness to the mattress, on the other hand, latex coconut coir, which gives rigidity.
Effect: increases the comfort of the bed, you can choose the side of firmness. Suitable for models of sofas, armchairs and folding beds with a folding mechanism such as "Sedaflex", "French folding bed", "Accordion", etc. HEIGHT - 5 cm.

Topper Latex

Topper Latex double-sided mattress topper is made of the finest natural latex on one side and orthopedic foam on the other. Latex significantly increases the level of comfort during sleep, and dense orthopedic foam allows you to better distribute weight over the area of ​​​​the bed.
Effect: reduces the firmness of the mattress. Suitable for models of sofas, armchairs and folding beds with a folding mechanism such as "Sedaflex", "French folding bed", "Accordion", etc. HEIGHT - 4 cm.

Moisture resistant mattress covers

Moisture-resistant mattress toppers and covers will protect the mattress from moisture, dirt and allergens.

Mattress covers and toppers "LONAX" cover a wide range of applications: in this section you can find both protective fabric covers with protection against dust and moisture, and toppers for every taste. Many of Lonax's mattress pads and toppers can be made in custom sizes, making Lonax products the perfect choice for those who prefer custom sleeping arrangements.

Mattress pad Lonax Latex 3

Latex 3 topper is made of natural perforated latex. This material is distinguished by a high level of comfort, softness and elasticity. Recommended for a slight increase in softness on hard to medium-hard sleeping surfaces. The mattress cover is delivered in a rolled form, which is very convenient for transportation. A higher version of this mattress pad (6 cm) is also available - Lonax Latex 6.
Effect: reduces the firmness of the mattress. HEIGHT - 3 cm.

Mattress pad Lonax Cocos 3

Hard mattress pad Lonax Cocos 3 is able to noticeably smooth out small unevenness of the bed, as well as increase the elasticity of the mattress. The material used in this mattress pad is natural, breathable coconut coir, a natural material that has proven itself in orthopedics. Coir allows you to better distribute the weight on the surface of the mattress and improves air circulation. Also available is a taller version of this mattress pad (6 cm) with increased rigidity: Lonax Cocos 6.
Effect: smooths out unevenness, increases the rigidity of the bed. Not recommended for beds with large irregularities - folding sofas and armchairs with wide gaps. HEIGHT - 3 cm.

Power Action mattress covers

Power Action Mattress Pad is a range of high-tech mattress pads with various effects that significantly improve your sleeping comfort. Each of these mattress toppers has its own unique feature.

Thermo Cool Theta: is a cooling mattress pad that uses a patented technology for the production of latex - Theta Comfort microcapsules that can absorb and release heat without changing their own temperature. Thanks to these capsules, as well as an ultra-air-permeable hollow fiber mattress pad cover, this mattress pad is able to regulate the temperature of the sleeping surface.


Clima Natura Comfort: , like Thermo Cool Theta, is capable of thermoregulation due to the use of technology for impregnating the upper layers of latex with Theta Comfort microcapsules. However, in addition to this property, the Clima Natura Comfort mattress pad has a micromass function, which is achieved through the use of a three-zone latex with a relief surface.


Organic Ultra Multizone: topper made of latex divided into 7 comfort zones with micro-massage effect, selected specifically for each body part. In the center of the mattress pad there is a special voluminous Air mesh, which significantly improves air circulation in the mattress pad. The bottom layer of Organic Ultra Multizone is perforated natural latex. Another feature of the model is the cover, made from organic cotton, grown without the use of any chemicals.


Silver Care Relax: three-layer mattress pad with antibacterial effect cover. The bottom layer of the mattress topper is natural latex. The upper is muscle-relaxing and stress-relieving memoryform foam with a cellular structure and micro-massage effect. between the layers there is a three-dimensional air mesh that ventilates the product. Threads treated with silver ions are woven into the mattress cover.

Effect: body micromassage, cooling, leveling of the sleeping surface. Suitable for models of sofas, armchairs and folding beds with a folding mechanism such as "Sedaflex", "French folding bed", "Accordion", etc. HEIGHT - 7 cm.

Mattress topper Lonax LX5

Universal mattress topper suitable for any surface. Made from high quality artificial latex of medium hardness. The topper perfectly evens out the unevenness of the sleeping surface and has a moderate orthopedic effect by improving the weight distribution over the area. A higher version of this mattress topper (10 cm) is also available: Lonax LX10
Effect: increases comfort level, smooths out unevenness. Suitable for models of sofas, armchairs and folding beds with a folding mechanism such as "Sedaflex", "French folding bed", "Accordion", etc. HEIGHT - 5 cm.

Protective mattress covers (fabric covers)

Protective mattress pads are an important attribute of a bed. The use of protective covers will extend the life of mattresses, protect them from dust, dirt and moisture.
Effect: protection of the bed from dirt, increasing the life of the mattress.


Learn more

31 Suttle St, Durango, CO 81303    Phone: (970) 259-3489 ext. 3
Site Map