How to make a palm tree trunk smooth


How to Trim Palm Tree Trunk In 2022 [7 Pro Steps]

Pruning the palm tree has always been a divisive topic amongst gardeners and experts. While many think pruning is essential for the palm tree's growth, a lot more suggests that the process is not necessary at all. This second group says pruning does nothing but hurt the tree. 

Like other trees, the palm tree needs pruning albeit carefully and at long intervals. There are many reasons why a tree, even the palm tree, should be pruned.

We will be discussing these reasons and more as well as how to trim palm tree trunk like a pro - even if you've never done it before.

Let's get started!

Table of Contents

Why Trim Palm Tree Trunk?

If there is much ado about trimming a palm tree, then there is undoubtedly a reason why. Earlier, gardeners thought trimming a palm tree would make it grow faster. But recent studies have shown that this is not true. So, why trim a palm tree trunk?

The very first reason to trim palm trees is to get rid of dying or dead palm fronds. When you eliminate these dead fronds, you prevent breakage damage. 

The second reason is to eliminate breeding places for pests. Scorpions, rats, and squirrels often nest in these dead fronds and eat away at your plant. Trimming the palm tree ensures they don’t, and this leaves your tree healthier and more robust.

If the palm tree in question is near homes and buildings, you should trim them as too many fronds can be a fire hazard. They are also dangerous in windy times as they may break off and hit something or someone, causing mortal injury.

You have to trim the palm tree to get to the flowers, seeds, and fruit. People trim the palm trees located at walks and driveways so they can see better while driving or taking a walk.

When Should You Trim Palm Tree Trunk?

When is the best time to trim the palm tree trunk? The best time to prune a palm trunk is during spring.

However, there are some things you’d notice on your tree, which are indicators that you need to prune your tree. Here are some of those indicators. If you do not see any of these indicators, do not trim your tree.

  • Dead fronds. These are usually white, yellow, or brown and they hang down looking wilted.
  • Broken fronds.
  • Fruit stalks and palm flowers. They slow tree growth and use energy.

NB: Yellow spots on old palm fronds do not mean your tree needs pruning. It means the tree is lacking potassium. What you do in this case is supply the palm tree with extra potassium.

Wait for one year before pruning. If you prune a potassium deficient palm tree, other fronds will turn yellow and lose nutrients.

Tools for Trimming Palm Tree Trunk

What are the tools needed for trimming a palm tree trunk? The type of tools you need for trimming a palm tree may vary, depending on the palm tree's height.

Here are some of the trees below:

  • Serrated knife: You can use this for fronds with a diameter equal to or less than an inch. You can also use the knife to cut flower stalks.
  • Shears or big clippers: This is for removing fronds with diameters higher than an inch.
  • Hand saw: The hand saw is perfect for medium-sized trees.
  • Chain saw: This saw is for giant trees, and you should be careful when using it. It is safe for you to contact an arborist if your tree needs a chain saw.
  • Disinfectants: For sterilizing the tools to avoid the transfer of diseases.
  • Whetstone/Bench grinder/Oilstone: For sharpening your blades.
  • Ladder/Lifts/Step stools: For climbing the tree.
  • Gloves: For protecting your palm against sharp frond edges.
  • Googles: For protecting your eyes from sharp, small, and flying debris.

>>> Read Also: Essential Gardening Tools

NB: If you are a novice in pruning palm fronds, especially if the tree is huge, please employ the services of a professional-an arborist. 

How to Trim Palm Tree Trunk

How do you trim the palm tree trunk? Follow the steps below.

Step 1: Sterilize the Tools

The first thing to do is to sterilize trimming tools to prevent the spread of diseases. Wipe away debris and dirt from the cutting tools. Then soak the tools in a disinfecting solution.

For this solution, mix three parts of water with a part of bleach. Soak the cutting tools in the solution for five minutes. Rinse with water and air dry.

Step 2: Prepare to Climb the Tree

You must ensure your climbing gear is in order before climbing. Some palm trees are quite tall, and any carelessness or slip could lead to a fall, which can be fatal.

While you are looking out for your safety, ensure the climbing equipment is not damaging the tree trunk. If the tree trunk damages while trimming, your palm may not recover.

Step 3: Get Rid of Dead Leaves 

Use your knife or saw to cut off dead fronds, starting at the base of the tree’s foliage. Cut 2 inches from the tree trunk. Remove fronds below the angle 90 lines, even if they are green. Be careful not to cut the tree’s crown. If you do, your palm will die. 

It is unnecessary to trim palm species such as Kentia, Chamadoreas, Jubaea, and King palms. They self-clean as dead fronds drop naturally.

Step 4: Get Rid of Loose Petioles

Pull the loose petioles slowly. If they are stiff and won't come off when you apply little pressure, leave it be.

Step 5: Trim Developing Fruits and Flowers

If the palm is a flowering species, clip off the fruits and flowers as they take nutrients and prevent fast growth.

Step 7: Discard Trimmed Fronds Properly

Fronds have sharp edges, and if you leave them lying around, they might hurt someone. Please put them in an organic waste bin.

Also, pick up flowers and fruits and dispose of them accordingly. If you leave them lying around, you may invite pests.

>>> Read Also:

  • How to Treat Fungus on Palm Trees
  • Types of Palm Trees In Florida
  • Types of Succulents
  • Names of Flowers In Alphabetical Order

Conclusion

How to trim palm tree trunk is what every gardener who has palm trees should know. But if you do not, it is wise to call in experts who can help you do that.

Please do not leave the tree without any fronds, especially the green ones, as they make food for the tree. And if the tree cannot make its food, it will look unhealthy and weak.

Your palm tree does not need you to prune it continually, as this will affect its growth. It is better if you only trim your tree once a year for maximum results.

Click to rate this post!

[Total: Average: ]

How To Trim A Palm Tree in 5 Simple Steps

Palm trees add a tropical look and feel to your home indoors and in outdoor gardens. Overall, palm trees are pretty low maintenance, but there are occasions when you may need to give a palm tree a trim. But, have you ever wondered how to trim a palm tree, what tools you might need, or when to call a professional for assistance? We researched various sources about how to safely and adequately trim a palm tree and signs that your palm tree could use some maintenance.   

Here are the steps you need to take if you want to trim a palm tree -

  1. Look over your palm for brown fronds.
  2. Clean your pruning shears (or an extended pole saw for tall palms).
  3. Remove dead fronds without harming the trunk, avoiding the crown head.

For tall trees, or if you're unsure of how to cut the tree, call a professional.

Indoor palms that are small and more manageable are easy to trim and care for, but larger palms may require hiring a professional. Read on and gain the confidence you need to best care for your palm tree's health and appearance.

Uncover the Needs of Your Palm Tree

Luckily, most palm trees are relatively low-maintenance plants that thrive when grown outdoors or indoors, depending on the species. Although palm trees can live up to a century, they still require routine maintenance to keep them healthy, beautiful, and growing skyward. There are more than a few reasons it may become necessary to give a palm tree a trim.

Old Discolored Fronds

There is no greater eyesore in an outdoor garden than walking or driving past and witnessing a distressed-looking palm tree covered in dead, brown, discolored fronds. It is not only visually unattractive to neglect to prune old fronds that are no longer green and healthy, but they add extra weight to a palm tree, further stressing the plant.

Aesthetic Appeal

It is essential not to over prune a palm tree, as they only need maintenance an average of once or twice a year. However, there are moments when a gardener shouldn't wait any longer to trim that palm. Remember to make sure a palm frond is entirely dead before removing it and be mindful of being overzealous with pruning shears or a saw.

Fire Hazard

Palm trees that have dried leaves hanging around are not only an eyesore, but they can lead to fires. If a palm tree is growing in a place that gets incredibly hot and has high windows, anything that can catch on fire should be removed as soon as possible. A flaming palm tree ignited because of areas that experience fire season or a lightning strike can easily ignite nearby structures, plants, and damage property.

Vermin 

Especially in states like Florida, palm rats can be a severe problem if you love growing palm trees outdoors. An unkempt palm tree that needs a trim may be a haven for rats. Palm trees that are a mass of dead hanging fronds, or have a hollowed-out trunk provide a nest for vermin looking to make a home.

Seasonal Trim

Spring is the best time to prune a palm tree, as fronds should be allowed to hang on a palm tree during the summer and wintertime to protect the tree from extreme temperatures. Unless the fronds of a palm tree are dead, brown, a hazard, or diseased, it is not necessary to prune a palm. Removing the fronds of a palm more than once a year can lead to a weakened plant and retard growth.

How Do I Trim a Palm Tree?

Before you tackle the task of trimming a palm tree, you need to have the right tools for the job first. Small indoor palm trees can be pruned easily with a pair of bypass pruners or loopers. A more massive palm may require calling for professional help if you are short on time or uncomfortable with pruning your palm tree. You may need to don climbing gear or climb a ladder to reach fronds. A clean cutting saw should be used to trim palms that have dead fronds, or diseased and damaged sections, leaving only healthy parts of the tree behind.

Trimming a small indoor palm is pretty straightforward. However, here are the steps to prune a sizeable outdoor palm tree safely.

  1. Make sure your tools are clean and sterilized to prevent transmission of disease to your plant. Use a solution of bleach and water with a 1 to 3 ratio.
  2. Cut or saw fronds close to the trunk without damaging the trunk, and only if the fronds are not at a 90-degree angle.
  3. Use an extension ladder or put on climbing gear to reach high areas of a palm tree over 15 feet.
  4. Looping shears can be used to prune a palm tree, but a linoleum knife helps remove boots on a trunk that do not fall off.
  5. Don't remove yellow fronds and only remove fronds that are brown, dead, and falling downward. Keeping this in mind helps the palm retain nutrients and stay strong and healthy.

Take your time when pruning a palm tree and carefully look over your plant to check for disease, fungus, signs of vermin, or other problems. If you do not feel confident enough to prune a palm do call a professional to provide maintenance services for your plants.

When Should Palm Trees be Trimmed?

A palm tree should be trimmed in the springtime, but also before hurricane or fire season starts. Dead fronds and boots left hanging on a tree can lead to property damage if blown about by strong winds, or if the tree becomes ignited.

What is the Best Tool to Trim Palm Trees?

The best tool to trim a palm tree if it is small is a set of bypass pruning shears. If you are cutting an outdoor palm tree that is over 15 feet tall, you will want to use a pole saw to reach hard to get areas.

Check out this pole saw and chainsaw combo on Amazon.

Check out this set of pruning shears on Amazon.

Should You Trim a Palm Tree on Your Own?

If you wish to trim a palm tree on your own using climbing gear, it is best to avoid using spikes, which can damage the trunk as you shimmy up the tree. It is better to rent a lift or use an extendable ladder to get to high places in a palm tree without causing unnecessary damage or hire a professional to examine and prune your tree.

Check out this tree-climbing set on Amazon.

How Much Does it Cost to Trim a Palm Tree?

The cost of having a palm tree trimmed depends on the tree's height if it is an emergency call, and the condition of your palm. Trees that are taller or are in poor health are more expensive to trim because of the extensive amount of time needed to perform proper maintenance and care. Palms that are 30 feet or smaller may cost as little as $75 and as much as $400 to trim. Trees towering 60 feet or higher may cost between $200 and $1200 for professional maintenance.

Homeowners can prepare to spend between $80 and $1200 to have their palm trees trimmed depending on the number of trees that need attention, accessibility issues, and the height, width, condition, and location of the trees in question. The national average cost to have a tree trimmed or removed is $693.

Should I Cut Off Brown Palm Leaves?

Remove brown palm leaves, especially if they no longer sit on the palm at a 90-degree angle or higher, or they are dried out. Palm leaves that are alive and healthy are vibrant green and become yellow and then brown as they die.

What Happens When You Cut the Top Off a Palm Tree?

It is not advisable to cut off the top of a palm tree or the crown head. The crown head is responsible for the palm tree's growth and continual existence, and a palm tree will soon perish after you remove the top.

Click here to read more fascinating articles about palm trees.

8 Palm Trees That Stay Small

11 Low-Maintenance Palm Trees That You'll Love

12 Awesome Planters & Pots for Palm Trees

We make a palm tree from plastic bottles with our own hands. How to make a palm tree out of plastic bottles with your own hands in stages: step by step instructions

Do you think that palm trees are not typical trees for our places? But "jack of all trades" tirelessly plant them in the adjoining territories. True, not at all hoping for a crop of bananas or coconuts. Although this tree looks very similar from afar, such a palm tree is made of plastic bottles (by the way, craftsmen are able to create a masterpiece even from wood or sheet metal). Such a solution allows not only to improve your yard or decorate a playground, but also to recycle hundreds and thousands of pieces of unnecessary plastic.

If you decide to practice creating artificial trees in this way, then first choose a palm tree that is suitable for complexity (and they already come in different types, just like real ones).

The appearance is about the same: the stems are made from dark brown bottles, and the leaves are made from various shades of green (although avant-garde blue or yellow-green compositions are also found). Containers from kvass, carbonated drinks, beer usually go to consumption. The principle of creating all palm trees is not the same: a round wooden support with bottoms nailed to it or bottles with cut bottoms strung on a cable or wire can be used to form the trunk. Palm leaves can also be lush, like a fan, or elongated, like a trunk. The former are cut into pieces and resemble operations for notching and bending, while the latter are simply strung according to the principle of the trunk. Depending on the size of the recyclable containers, the sizes of palm leaves and trunks also vary. Of course, with the help of six-liter water bottles, you can “grow” a huge tree, but such a palm tree looks a little clumsy. So it is better to focus on collecting 1.5 and 2 liter bottles of certain colors. By the way, do not throw away the corks from these bottles, some people manage to decorate the walls of the house with simply incredible mosaics. Such a tree will require incredible patience and perseverance, so let's look at all the options and quickly choose the right one.

How to create a palm tree from plastic bottles: 2 step-by-step instructions for every taste

Option 1

1. Preparing the base for palm trees. We find a metal sheet 40x60 cm, with a thickness of 0.5 cm. We weld two rods on it at an angle, at least 25 cm long. Metal tubes of the required height are then put on them (the diameter should be less than the neck of the containers used to form the trunk of the palm tree ). 6-7 pieces of pipe are welded onto the upper part of these supports so that from above the structure resembles a revolver drum.

2. We find a sufficient number of bottles and a thick (high-voltage) cable, the diameter of which is slightly smaller than the neck of the container. Such a cable will serve as a guide and retain the shape of the sheet.

3. Making palm leaves. To do this, we cut all the green bottles in half and cut the upper part into longitudinal strips, leaving a narrow neck intact (retreat half a finger from the lid). The thinner you cut the container, the more magnificent and natural the crown will turn out. It is allowed to use bottles with different silhouettes, this will not affect the overall contour of the palm leaf.

All blanks are strung on the cable so that one lush and continuous “sheet” is obtained. They need to be made according to the number of holes at the top of the metal support tube.

4. Prepare the trunk of the palm tree. To do this, you need dark brown dense bottles, from which you must first cut off the bottom (cut straight along the contours), and then cut it so that you get “petals”-segments bent inward. They will help to imitate the bumpy trunk of a palm tree. The length of the cut is 2/3 of the height of the container, the upper part remains intact. You can cut with either scissors or a clerical knife. Having prepared a sufficient number of components of the trunk, you can proceed to stringing on metal tubes. The bottles sit upside down and with a shift (like cones) to make a beautiful trunk.

5. After forming the trunk, we fix the palm leaves. We bend the cable and fix it from the side of the top of the tube and from the inside of the neck of the last bottle. To hide the lower part of the palm tree and give stability to the structure, it must be buried in the ground to a depth of 50 cm.

1. Stem shaping. To do this, cut off 1/3 of the bottle, counting from the side of the neck. We cut out 8 petals or triangles on each part, leaving the narrowest part of the neck intact (retreat about half a finger from the lid). Each segment must be turned outward to form a scaly palm trunk. The second half of the bottle can be used in the same way, only you have to manually punch a hole of the desired diameter with a knife hot on the stove.

2. Leaf formation. This palm differs from the previous version precisely in the shape of the leaves. This produces wide fan leaves, and you can combine green and yellow bottles to achieve a more natural shade. The splendor of the crown depends on the number of bottles, and the width of the sheet depends on the size of the container. For the formation of large and tall trees, it is better to take 6-liter bottles, and for small ones - the usual 1.5-liter ones.

First, the bottom of the bottle is cut off, and then the entire side surface is divided into three parts (half a finger short of the neck). We give each segment the shape of a petal (we round off at the end, we narrow it near the neck), and then we unbend everything outward.

Then we cut the pieces on both sides, forming a “fringe” of the palm leaf, leaving an uncut middle about 1.5 cm wide. - in place, the third - up, etc. The rest of the work is carried out similarly to those described in option 1.

Option 3

This palm tree made from plastic bottles differs from the previous versions in the shape of the leaves and the shape of the trunk. So step by step.

1. Crown formation. To make the palm look lush, you need to use small bottles (up to 1.5 liters) and make as many leaves as possible. Palm leaves are the bottoms of green bottles strung on a hard cable. Preliminary, using a drill or a hot knife, holes are made according to the diameter of the cable. First, one end of the cable is fixed in the lid of the whole bottle, and then bottoms are put on it and the cable. The other end of the cable is fixed directly on the support.

2. Stem shaping. The difference from the previous options is also in the way to create a trunk. It does not use a metal support, but a log of small diameter. The bottoms of brown bottles are overlapped on it for volume (holes are made with a pre-hot knife or nail), so that from a distance the palm tree looks almost real.

As you can see, there is no limit to perfection. Such a palm tree made of plastic bottles can become a real decoration of the yard and a joy for the kids. Especially if you additionally decorate it with hand-made coconuts, bananas and plant a toy parrot or a monkey on a tree.

Instruction video

In this article we want to talk about how to successfully combine love for the tropics, creativity and unnecessary plastic bottles.

Palm tree is an undeniable symbol of summer and relaxation. But it’s expensive to go to live palm trees, and you want to get a piece of such a wonderful sunny mood. However, why buy a palm tree if you can make it yourself? Yes, and using items that are easy to find in any home - plastic bottles.

How to make a palm tree from plastic bottles step by step?

  • Let's start by cutting palm leaves. To do this, divide the plastic green bottle into two parts, the top one will come in handy
  • This upper part is now cut into strips. Work the surface lengthwise. The shape of the bottle does not matter - any
  • will do


  • After cutting, the resulting bottles are fixed on the cable

IMPORTANT: The cable diameter must be between 12 and 14 millimeters.





  • And now you can start making the barrel . For these, plastic bottles with a capacity of about 2.5 liters in brown color
  • are useful


  • Cut along bottles so that the stripes are wide


  • Removable bottom




  • Prepare a sheet of metal , which must be more than 0.5 centimeters thick. Two rods need to be welded to this sheet is about 25 centimeters long. One of them should be at an angle of 90 degrees to the sheet, and the other under a smaller one


  • Put metal tubes on the bars . The diameter is desirable within 20 millimeters. As for the height, it depends on how tall the palm tree you want to see


  • Metal bushings must be welded on the ends of the rods. It is in them that palm leaves from bottles will be planted


IMPORTANT: It is better to bend the wires on which the improvised leaves are attached.



  • As soon as the leaves are collected, you can proceed to the trunk


Diagram of a palm tree from plastic bottles

  • For clarity, you can see on the diagram how to form trunk of the future tree from plastic bottles. Fix an iron rod in the ground, and then string bottles on it. Cut off the bottom of bottles


  • Green bottles for leaves also have the bottom cut off. Further each of the bottles is cut into 3 or 4 parts . Each part, in turn, is made in the form of a fringe


  • As soon as a few green bottles are designed in the way indicated in the diagram, you can start assembling the crown

IMPORTANT: It is recommended to make cuts in the form of crosses on the brown bottle - this way the green bottles will be better attached. For better fastening, you can also wire the composite crowns inside the brown bottle to each other.



  • Now top with crown attached to the trunk as shown in diagram


How many plastic bottles do you need to make a palm tree?

Every home has plastic bottles, but how many do you need for a palm tree? For barrel stock up 10-15 pieces of brown material, or even more.

Pay attention to displacement: so, for crafts from 15 bottles it is recommended to purchase a two-liter material, but for smaller palm trees - bottles of 10 - you can stock up on one and a half liter bottles.

As for leaves , then it is better to take larger bottles for them - palm leaves are quite long. On average, at least 7 bottles are needed for one palm tree.



How to make palm leaves from plastic bottles?

  • If you want wide leaves , resembling a fan, cut off the bottom first. Then make cuts in the bottle so that three parts are formed. It is recommended to use not only green bottles, but also yellow ones - this way the palm tree will look more natural

IMPORTANT: Bring the cuts about half a finger to the neckline.

  • Each notch is rounded and tapers towards the base in a way that resembles the leaves of
  • Now you need to unbend all the leaves outward
  • The leaves are cut to form a fringe. Fringe is required on both sides of each leaf. The middle, of course, should remain intact - 1.5 centimeters is enough. To create splendor, it is recommended to bend each clove according to the following principle - one down, the second straight, and the third up

How to make a palm stem from plastic bottles?

  • First cut off about 1/3 of the bottle - namely the bottom
  • Cut out 8 petals from the remaining bottle. Rest half a finger from the cover
  • Unscrew each of the segments

IMPORTANT: You can also use a cut third of the bottle to save material. However, you will have to make a hole in it for this. You can use a knife, pre-heated on the stove, for such purposes.

How to assemble a palm tree from plastic bottles?

As a stem, which will serve as a support for the palm tree, it is best to use a metal-plastic pipe . Its diameter should be 20 millimeters. But there are no restrictions on the height.

  • Start from the bottom . And for the bottom, select the largest details, for the top - the smallest. They are assembled using the glass-to-glass method
  • Petals should turn at this time staggered
  • The bottom is best fixed with double narrow tape - it connects perfectly. However, you can also use glue
  • But 30 centimeters before the top of the stem, you need to finish collecting the trunk and start collecting foliage. And also use checkerboard order
  • Once assembly is complete, bury the rebar 30 centimeters into the ground. At the same time, 40 centimeters must remain on the surface. And on this armature, put on a ready-made pipe with a palm tree


Plastic bottle palm options

Plastic bottle palm trees can look different. But it is better to see once, so we offer you a selection of photos with similar artificial trees.















Plastic Bottle Bonsai Palm

  • To make this palm , cut off the top and bottom of the bottle


  • From the resulting green plastic material , cut into small strips, and from them into leaves

IMPORTANT: The strips should be about a centimeter wide.



  • Each of the leaf pieces must be pierced


  • Branch wire should also be prepared - it should be between 0.2 and 0.5 millimeters in diameter


  • Now cut 30-50 centimeters of wire and fold it in half. Thread the first sheet and twist the ends 2 or 3 times to secure it


  • The first rectangle is the top sheet. Place the rest on either side of him


IMPORTANT: Retreat from each pair of leaves should be 3-4 millimeters, and then you need to twist the wire.

  • As soon as the weaving of the twig is finished, twist the ends . In general, for a palm tree, you need to stock up on 15 branches. Let the uppermost ones contain the largest number of leaves, and the lower ones - less


  • The palm tree will consist of two tiers. Branches must intertwine with each other, creating a common trunk


  • And now we will create the foundation . A pot is not very suitable - it is best to fix the palm tree on the island. For its manufacture, a soap dish, a saucer, a vessel is useful - anything that has an oblong shape. The container is covered with cling film, and then filled with liquid alabaster


  • Put the palm tree in a bowl and wait 10 minutes - hardening will occur during this time. Then it remains only to remove the platform How to make a big palm tree from plastic bottles?
    • First of all, stock up on plenty of bottles. Cut them in half and shape the cut into teeth
    • Further, a metal pin is attached to the ground . Alternatively, use strong wire

    IMPORTANT: Make sure the pin is firmly attached to the ground.

    • Bottle blanks thread on the pin . It is advisable to go around them in order to create a natural effect
    • Cut out leaves from green bottles , after removing the bottom from the bottles
    • Connect all the elements into a common structure . They can be fastened with bundles or welding


    How to make a small palm tree out of plastic bottles?

    For this small room palm tree you will need only 3 brown bottles and one for leaves with a capacity of 0. 6 liters.

    • So, cut each of the brown bottles into 4 equal parts . And on the cut of each of the parts of you need to form cuts in the form of triangles in centimeter
    • Fold back these sections
    • Now divide the green bottle into 3 parts , the largest of which will be the one with a neck - 9 centimeters
    • Assemble the trunk from the part that consists of the bottom . Glue other components of the barrel into it


    As you can see, you can arrange your own tropics in any part of our vast country, and at any time of the year. The material is very accessible, and a little time will be spent. In addition, such a palm tree is perfect for those who do not have time to take care of living plants.

    Video: Bottle Spreading Palm Tree Workshop

Olesya S.

Date palm, coconut palm, banana palm. And which one do you like? Today we will make an evergreen, beautiful palm tree from plastic bottles, which will decorate your estate and give an exotic and warm mood. Feel the atmosphere of the tropics right in your yard with a very simple DIY palm tree tutorial.

To make exotic wood from plastic bottles, you will need the following materials:

  • Brown plastic bottles of the same diameter (approx. 2 liters), for the trunk;
  • Green plastic bottles (various sizes allowed) for palm leaves;
  • Scissors, clerical knife;
  • Scotch;
  • Plastic pipe or metal rod.

1. Let's start making a palm tree trunk. To do this, take a brown bottle and a knife. Remove the cork, you won't need it anymore.

2. Cut the bottle crosswise, making sure the bottom is slightly larger than the top.

3. Use scissors to cut the part of the bottle with the neck into six identical parts, reaching the beginning of the narrowing of the upper part, stop. Each cut part must be shaped into an oblong triangle or petals. To do this, round and narrow the cut parts.

4. Repeat the same procedure with the remaining half. Also, use a hot knife or awl to make a hole in the bottom of the bottom half of the bottle with a diameter of the neck hole.

5. Make a fold at the base and bend the resulting plastic petals one by one.

6. Having opened all the petals, you get a six-sided flower.

7. Do the same procedure with the second remaining half.

8. Cut the remaining brown bottles in the same way, make cuts and form petals. You will get many halves that will need to be inserted one into the other, neck to the bottom.

9. Let's start forming the trunk of an exotic beauty. To do this, take a metal rod or a plastic pipe and thread all the brown bottle blanks onto it. Secure the bottom part with tape. It is important when forming the trunk to distribute the bottles so that the petals occupy all the free space and do not leave empty spaces (in a checkerboard pattern). The height of the palm tree also depends on the number of blanks. The trunk of the palm tree is ready!

10. Let's start making palm leaves. To do this, take green bottles and a clerical knife. Remove the corks from the bottles, they are no longer needed.

11. Cut off the neck and bottom.

12. Then cut the resulting blank lengthwise into three identical parts, starting from the bottom, not reaching the top about 2-3 centimeters.

13. Open the cut parts, leaving a hole in the center for fixing the greenery to the base of the trunk.

14. Bring the leaves of the palm tree into a natural and familiar look. To do this, make cuts on all sides of the petal, not reaching the middle of about 1.5 centimeters.

15. Round the petals slightly and make the cuts obliquely.

16. Fold the resulting thin strips through one. Thus, the foliage of the palm tree will become more magnificent.

17. Do the same with the rest of the remaining petals. For more lush palm greens, use plenty of green bottles.

18. Let's start assembling the exotic beauty. On the remaining pin of the previously prepared table, put on the plastic greenery made. If the bottles are different in size, then first stack the large ones, and then the smaller ones. You need to form a palm tree cap by stacking the bottles in a checkerboard pattern to get rid of unnecessary green spaces. We attach the last green blank to the pipe with adhesive tape. So that the palm tree is not blown away by the wind, it is important to fix it by digging the bottom of the rod on which the palm blanks are threaded into the ground for half a meter.

It is difficult to dispose of the many unnecessary plastic bottles that have accumulated in the country house over the summer. But there is a simple way out of this situation. All empty containers can be turned into beautiful garden ornaments. One of these decorations is a do-it-yourself palm tree made from plastic bottles. Step-by-step production and a good mood will help to cope with the task in no time.

Plastic uses

The process of decomposition of plastic material lasts for 100 years. In order not to pollute the environment, plastic waste has been disposed of in any area. But there are some suburban areas from which waste is not removed. In this case, conscientious summer residents take out the bottles on their own. In order not to do extra work on export, in one evening you can make a palm tree from plastic bottles. It is enough to collect all the multi-colored containers on the site. Palm trees can decorate:

There are three ways to make a palm tree out of bottles. Each of the ways will help to realize your creative fantasies and create a real work of art from plastic. This masterpiece will be a real decoration for any site.

Types of garden decorations

There are many ways to make an artificial palm tree.

Thanks to this, the appearance of the tree can be anything.

Types of designs are:

  • Straight or petal-shaped. Sometimes a log is used as a base.
  • High and low.
  • Spreading smooth leaves or fringed.

Making large palm trees

To make a large palm tree, you will need a lot of plastic bottles. They begin to collect them in advance, involving the whole family and relatives in the process. For work you will need the following materials:

  • Plastic bottles in various colours. A trunk is made from brown containers, leaves are made from green bottles.
  • A metal rod is used for the trunk, a thick wire is used for the leaves.
  • Wide tape, scissors and sharp knife.

The sakura tree in Japanese culture

You need to know that the more bottles you collect, the more magnificent the crown of the plant will be. To make the trunks and leaves look smoother and better, containers of the same size and diameter are used for manufacturing. Containers of other sizes should not be thrown away. Leaves are made from small bottles and inserted into the middle of the crown. In this place, a different amount of material will not be visible. But they cannot be used for the trunk. From narrow brown containers, trunks are constructed for other types of trees. Containers of different shades will make all crafts from plastic bottles brighter and richer. Palm step by step:

Cultivation of royal delonix (fire tree) in Ukraine

Tree with unusual leaves

In addition to the big tree, there is another way to make palm trees. It is a little more complicated, but it has a special originality. If you follow all the instructions step by step, then making a palm tree from bottles will not be difficult. The work process begins with the manufacture of the barrel:

All elements are strung on a metal bundle or cable and form a tree.

Bottle Bottom Construction

This palm tree will require twice as many bottles to make. Because the whole structure consists of bottoms. Step by step workflow:

If you additionally decorate the palm tree and the surrounding area with other crafts, then the site will look even more interesting. For example, from plastic bottles you can make monkeys, bees and pigs. Swans made from car tires look interesting.

What gardener wouldn't want an exotic palm tree to decorate his garden?

The first stage is preparatory. In order for the design of such an original decoration to be successful, you must have everything you need at hand. The main material from which the tree will be made is green and brown plastic bottles. We will use green bottles to create the leaves of the evergreen, brown ones for the trunk. The amount of plastic containers determines the size of your tree, i.e. the more bottles, the taller and more lush the tree, you will get the most lush leaves using a 2-liter container. Before proceeding to mastery, all bottles must be cleaned of paper stickers and labels.

As an aid to mastery, you need to prepare:

  • utility knife
  • sharp scissors
  • wide fixing tape
  • metal base with rods, which will later act as a trunk
  • rope, which will tie the base of the leaves on the palm tree.

The next step is to make the product itself.

Remember that in order for the tree to look aesthetically pleasing and beautiful, all bottles must be the same size and diameter. In the manufacture, we will use two colors - brown and green, so if your green bottles are “various in size”, then a smaller container can be attached to the base of the crown, but as for brown ones, vessels of the same size are needed here.

The production of exotic wood involves three main steps:

Making leaves;

Barrel assembly;

Collecting all the parts and shaping the tree itself.

With a sharp clerical knife, cut the bottle into two parts, where the upper half will act as foliage, and we do not need the lower half. In the upward direction to the neck, with scissors or a knife, the bottle is cut into small longitudinal strips, and this is done with each green bottle. Then such a kind of foliage from half bottles is strung on top of each other, connecting them with a strong tourniquet or rope. A cork is screwed on the last and first bottle, through which a tourniquet is threaded and tied into a knot so that the container fits snugly together. The top of the palm tree should consist of 5-6-7 leaves, therefore, depending on the amount of containers available, you create your tree, controlling the size and splendor.

After the foliage is complete, we move on to the trunk. The barrel, as mentioned earlier, is made from brown bottles of a similar diameter, cut off the lower base with a knife, after which wide longitudinal cuts are made towards the neck, there should be 6 such longitudinal fragments. After a similar action has been done with each brown bottle, they are fixed to each other, like green vessels, only the plastic barrel must now be put on a metal rod in an upright position.

The foliage is fixed at the upper base of the trunk, evenly distributing it on all sides. With the help of adhesive tape and a tourniquet, the leaves are attached to the trunk. Our tree is ready, it remains only to find a place for it in your garden.

Let's move on to the installation. Ideally, this is a welded metal platform, in the absence of this, immersion in the ground by 40-50 cm. For the durability of your skill, it would be good to compact the tree installation site with soil or concrete.

This evergreen tree of the African savannah will turn your backyard into a real oasis!

Learn how to make a palm tree out of plastic bottles: step-by-step instructions with a photo

Russian-style landscape design is a special kind of space decoration. Everything is used: from plastic bottles to old car tires. You can see rubber swans and caterpillars assembled from car tires in summer cottages or in some city yards. Even old enameled basins, combined with the stumps left after the sawing of dried trees, turn into bright multi-colored mushrooms. Particularly skilled designers make figures from wood, logs and all kinds of stumps. From such materials, very cute giraffes or storks are obtained, sitting on the remains of a sawn tree near the house.

The leader in the list of home-made art objects from improvised materials

In the list of exotic objects that can be found in the adjacent territories or suburban areas of Russians, a palm tree made from plastic bottles is clearly in the lead. Besides the fact that this piece of "bottle art" can fit into the landscape very well, it will also allow you to give a second life to plastic bottles, and not send them to a landfill, where they will pollute the environment. Any person who does not even have outstanding skills in needlework can make a palm tree from plastic bottles. You can spend the evening creating such an art object with your children. Therefore, in this article we will look at how to make a palm tree from plastic bottles.

What you need to make a palm tree

First of all, you need to prepare the materials. Obviously, when making palm trees from plastic bottles, it will not be possible to do without a large amount of this container. If you do not drink soda in unlimited quantities, then you may have to resort to the help of friends or relatives to donate "raw materials" for harvesting. Green and brown bottles are the best for this. But to show imagination and connect some other shades is not forbidden. The size of the container used is also important. Wide palm leaves will look most spectacular. Therefore, it is better to stock up on bottles of about two liters.

In addition to plastic bottles, for the palm tree you will need:

  • Frame. In this capacity, fittings, a plastic pipe, a wooden beam of sufficient length can act.
  • Materials for fastening elements: glue, adhesive tape, wire, construction stapler, rope, metal cable, self-tapping screws.
  • Stab and cutting accessories: knife, scissors.
  • Marker for marking.

Let's move on to how to make palm trees from plastic bottles step by step with your own hands.

An easy way to build a palm tree

If you've never built this kind of structure before, we recommend starting with the simplest version of a plastic bottle palm tree - for beginners. Step by step, the production of this art object can be divided into four stages:

  • preparation of plastic elements;
  • leaf binding and crown formation;
  • installation and design of the barrel;
  • crown holder.

Cut off the bottom of the bottles from which the barrel will be made (brown ones are best), about 3-4 centimeters.

We advise inexperienced designers to make leaves in the following way: for green bottles, cut off the bottom half (or a little less - at your discretion). You should get a long funnel. Further along the cut line, perpendicularly, you need to make deep enough cuts at a short distance to get something that looks like a fringe.

On a strong cable that holds its shape well, you need to put on green blanks: sequentially, necks in one direction, trying to insert them into each other as tightly as possible. Depending on the desired size of the future tree, it can take 15 funnels to make one branch of a palm tree. In total, you will need about six such branches. They need to be collected in a "bouquet" and fastened together with a rope or wire. The result of making a crown for a palm tree from plastic bottles is in the photo in the article.

In order for the palm tree to stand securely, it is recommended to dig the skeleton into the ground. The part remaining at the top must be completely decorated with blanks from brown bottles, simply by inserting the funnels into each other as tightly as possible.

When the trunk is ready, it must be crowned with a crown, which can be attached to the base using the same rope or wire.

So, the plastic bottle palm for beginners is ready.

Advanced palm tree making

How to make a palm tree out of plastic bottles step by step in this case, following the four steps described above. However, now the ways of cutting parts from bottles for both the trunk and the crown will become more complicated. You can choose any of the options you like, or even combine several at once.

How to cut bottles for the barrel

  • If you slightly modernize the method described in the “for beginners” paragraph, you can get a more effective palm tree. For long brown funnel blanks, you need to cut a fringe, like the leaves described in the same paragraph. When stringing bottles on the skeleton, the fringe can be “protruded”. This will give the barrel a rough effect.
  • Use the bottom of a bottle about 10-12 centimeters high to make. The cut of the bottle must be turned into a “fence”, making the edge jagged. Bend the resulting teeth about two centimeters high outward. Holes must be drilled in the bottom so that the elements can be put on the frame. This should be done upside down.
  • The teeth on the cuts of the bottle can be made not sharp, but rounded. Then the assembled trunk will look like it is covered with scales.
  • Only the bottoms of brown bottles can be used for barrel decoration. But for this, as a skeleton, you need to take either a thick wooden beam or a plastic pipe of sufficient diameter. You can attach plastic elements to the barrel using self-tapping screws and a screwdriver, placing the bottoms with the convex part outward and drilling them in the center. It is important to place them close to each other so that the skeleton does not shine through. To better fill the space, bottoms from bottles of different sizes are suitable.

How to shape the plastic elements for leaves

  • Cut off the bottom of the bottle. On the remaining long funnel, make four longitudinal cuts towards the neck, bend the resulting "petals". Make serrated or fringed cuts along the edge of each of them. Assemble several of these elements on a cable. For this version of palm trees from plastic bottles, you can take a container of a relatively small size. After assembling the required number of branches, fasten them together in the form of a bouquet.
  • Cut green bottles into as large rectangles as possible. Give them the shape of a leaf - cut the edge with cloves or fringe. The pieces should be fairly flat. To make a branch out of them, you need to sew them together with a stapler or wire. Fasten the ends and tie to the frame with a rope.

Recommendations for assembling a palm tree from plastic bottles

The options for manufacturing the elements indicated in the two previous paragraphs can be combined in any way you like. The main thing is that the end result pleases the eye. Particular attention in the manufacture of palm trees from plastic bottles with your own hands should be given to the assembly of the structure.

To prevent the crown from falling apart, in the case of using elements of bottles with necks, it is worth putting caps on the outer blanks. Pull the cable or rope through them, on which the fragments are strung, and tie good knots. On the side where the branch will be attached to the crown, it is recommended to leave a sufficiently long end of the cable (rope).

What else can be made from plastic bottles

In addition to palm trees, various fruits can also be made from plastic bottles.


Learn more