How to make jewelry tree


How To Make A Beautiful DIY Vintage Jewelry Tree

This post may contain affiliate links.

This DIY Vintage Jewelry Tree Tutorial is such a fun and unique craft idea. You can use favorite jewelry pieces that you want to display, or pick up inexpensive finds at thrift stores, or yard sales. 

SUPPLIES NEEDED FOR DIY VINTAGE JEWELRY TREE

  • Styrofoam Tree – please note you can make ANY shape! Eggs, balls, etc.
  • Jewelry- any kind, rings, bracelets, necklaces, pins, earrings
  • Dressmaker Pins – I buy the boxes of 750 Dritz pins
  • Extra Long Pins
  • Elmer’s Glue
  • Paint Sponge
  • Paint – to coordinate with your jewelry
  • Seed Beads – lots of e-beads and seed beads. You can really use any size you like.

how to make a DIY VINTAGE JEWELRY TREE

First, cover your tree with glue using your sponge. When completely dry, you want to paint your tree using a color that enhances your jewelry. Don’t forget, you can use any shape Styrofoam to make these beauties, you are not limited to the tree shape! Have fun with them. 

I used a silver gray for my pearl trees. It’s best to use a neutral color, as you really want your jewelry to be the star of the show. You don’t want the paint color to distract from all that beautiful bling!

Next, the fun part!

Start pinning your pieces into the styrofoam. I will say that the closer you put them together, the less bead pinning you will have to do.

You can just place pieces abstractly or in a pattern or just wherever you want. It really doesn’t matter because it will look beautiful anyway you do it!

Be sure to secure each piece either with extra pins, or wire if need be. 

When all your jewelry is secure, it’s time to start beading. 

Be sure to place an e-bead, then a seed bead on the pin, and just pin as close to each other as possible. Sometimes you will need to stack more than one bead on your pin because your jewelry piece stands out. 

Just keep pinning! I chose to use pearl beads for my trees but you can use whatever you like. 

I will also use just one color seed beads throughout so the jewelry pieces are the show! You definitely don’t want to take away from the main jewelry pieces. 

LOOK HOW GORGEOUS…

To display your trees, you might try candle holders. You can find tons of them at the thrift stores. The main thing is to have fun with this craft. Have a few of your friends over and you can each make a tree or two. 

I couldn’t resist sharing a few close ups of these gorgeous trees. They are even prettier in person!

Display them on a bookshelf, or a nightstand. This would also make a thoughtful memorial tree filled with costume jewelry from a loved one. Instead of leaving them in a box, put them on display so you can enjoy them.

You can make a few to place on a mantel, or line a buffet. The possibilities are endless.

If you liked this DIY vintage jewelry tree tutorial, you may also like these vintage DIY ideas:

Vintage Basket Wall Art

Modern Vintage Wood Box Makeover

Prep Time: 15 minutes

Active Time: 45 minutes

Total Time: 1 hour

Difficulty: Easy

Learn how to make a beautiful DIY vintage jewelry tree using unique pieces found while thrifting. This is a statement piece for sure!

Materials

  • Jewelry- any kind, rings, bracelets, necklaces, pins, earrings
  • Dressmaker Pins 
  • Extra long pins
  • Styrofoam tree
  • Elmer’s glue
  • Paint sponge
  • Paint
  • Beads

Instructions

  1. Cover your tree with glue using your sponge.
  2. When completely dry, paint your tree with a coordinating color.
  3. Start pinning your pieces into the styrofoam.
  4. Be sure to secure each piece either with extra pins or wire if needed.
  5. When all your jewelry is secure, start beading.
  6. Be sure to place e-bead then seed bead on the pin and pin as close to each other as possible.
  7. Start pinning around each piece of jewelry, pinning as close as possible.
  8. Cover all the original styrofoam.
  9. To display your trees, you might try candle holders.

Recommended Products

As an Amazon Associate and member of other affiliate programs, I earn from qualifying purchases.

  • Bohin Dressmaker Extra Long Pin Size 20-1 1/4in 325ct

Connect more here:

Text Me / Download Our Free App / E-mail Subscription / Shop / Tik Tok / YouTube / Pinterest / Facebook / Instagram /  Courses & Community

27 Homemade Jewelry Tree Ideas You Can DIY Easily

The problem with having too much jewelry is that you need somewhere to store it, and one creative solution is to make a jewelry tree to display it all on.

For anyone who wants to have a go at making one, we’ve had a look online to see what other people have been doing – and as a result, here are our favorite 27 DIY jewelry tree plans you might like to try copying at home.

 

1. Three Ways to Make a Jewelry Tree – wikiHow

If you want to learn about making jewelry trees, this post on WikiHow would be a great place to start. It teaches you three different ways to make beautiful trees to display your jewelry on, giving you somewhere to store everything while also showing it all off. As always, the guide is well written and offers plenty of great tips, making it well worth checking out.

Check Details

 

2. Easy Tree Jewelry Stands in Under 20 Minutes For $10

In this video, you’ll learn how to make two different types of jewelry tree stands. They’re both highly artistic and attractive – and the best part is they won’t cost you any more than around $10 to make. The technique is super-easy too, so if you like the way these trees look, you shouldn’t have any trouble making something similar yourself.

 

3. DIY Jewelry Tree – Centsational Style

The jewelry tree this tutorial teaches you how to make is simply stunning. We love the minimalist style achieved by using white paint and then only hanging a few choice pieces of jewelry on it, leaving it looking uncluttered and elegant. It’s also an inexpensive and easy design, so if you like it, why not see if you can make one just like it?

Check Details

 

4. DIY Hanging Jewelry Tree

Here’s an original idea we’re sure plenty of people will adore. Rather than a classic jewelry tree, in this tutorial, these YouTubers teach us how to make a version that is suspended from the ceiling. It looks fantastic and can give you somewhere to make the most of your jewelry by hanging it all somewhere people can see it. Check out the video and see what you think!

 

5. Rustic and Simple DIY Jewelry Tree – FaveCrafts.com

For those who enjoy a more rustic style, this is the plan for you. In it, you’ll learn how to make a simple jewelry organizer from nothing more than a small tree branch, some twine and a flowerpot. We love the effect it creates, and if you like it too, you shouldn’t have any trouble making one just like it at home.

Check Details

 

6. DIY Jewelry Holder Tree Made Out of Wire – Theseamanmom.com

The jewelry tree organizer this blogger shows us how to make is fabulous! It’s made of wire, which is then bent in all kinds of different angles, creating something that looks like it belongs in a fantasyland. It’s super-inexpensive to make too since all you’ll require is the wire itself plus spray paint in the color of your choice. A wonderful idea we like a lot!

Check Details

 

7. DIY Jewelry Tree

Here’s an ingenious idea for a jewelry tree from a highly talented YouTuber. In her video, she demonstrates how she built up the tree using wire and a glue gun. It’s fascinating to watch her work, and it’s so much fun to see as the tree begins to take shape. Once it’s finished and gets its final spray of paint, it looks amazing. This is a plan we loved – and we’re sure we won’t be the only ones!

 

8. Easy DIY Jewelry Tree – Red Ted Art

If you’re looking for a simple yet fun DIY project to work on with kids, this could be the ideal option. This plan teaches you how to make an easy jewelry tree that children will love working on and will be proud of when it’s done. This plan was created by an 11-year-old, making it the kind of thing that’s suitable for kids of almost any age – so why not give it a go with your little guys?

Check Details

 

9. DIY Jewelry Tree from Yf’s World

Perhaps one of the best things about jewelry trees is that they’re so easy to make. In providing ready-made branches, mother nature has already done most of the work for you – and all you need to do is concentrate on making them look beautiful. Want to know how to do it? Then give this video a watch for more info.

 

10. DIY Jewelry Tree – Zalando Lounge UK Magazine

The jewelry tree in this post is less organic and more industrial. However, it’s an incredibly fashionable style at the moment, and if it’s one you appreciate, this is a tutorial you should find interesting. Copying this plan doesn’t require any expensive materials or difficult techniques, so it’s the kind of thing just about anyone will be able to manage – check it out and see what you think!

Check Details

 

11. DIY Fantasy Wire Tree Jewelry Hanger

If you like the weird and wonderful jewelry tree in #6, this is another tutorial you should enjoy since, as you can guess from the title, it teaches you how to make another magical-looking fantasy jewelry tree. We think it looks so cute, and it’s the ideal way to store and display your favorite pieces of jewelry. Give it a watch and see if you agree.

 

12. Making a Costume Jewelry Christmas Tree – My Frugal Christmas

This “jewelry tree” is a bit different from the others in our list because rather than being a tree for displaying jewelry, this one is literally a tree made of jewelry. It’s a beautiful design, and the one in the post is specifically for Christmas – although you could also make something similar in the shape of a regular tree and hang it on your wall as an attractive piece of homemade art.

Check Details

 

13. DIY Jewelry Tree (Literally Made from a Tree!) – Do It, Gurl

Here’s a video tutorial by a YouTuber who has plenty of charisma and personality, making all her uploads a lot of fun to watch. In this one, she teaches us how to make a jewelry tree from a small tree branch, and when it’s finished, it looks perfect. Think you’re up to making something similar? Then give it a go and see how it turns out!

 

14. How to Make a Wire Jewelry Tree – Vickiodell.com

We’ve seen a couple of fun ideas for wire jewelry trees, but this one is more unique since it makes use of wire in a range of different colors. This gives the finished trees a striking look, and if it’s one you like, it should be a fun project trying to make one just like it.

Check Details

 

15. Jewelry Tree – DIY How-To

This is a video that any amateur woodworkers should enjoy. In it, this talented YouTuber shows us how to make a beautiful jewelry tree cut from a sheet of wood using a scroll saw. If you have the right tools, it should be a fun design to copy, and when it’s done, you’ll have somewhere convenient to display your collection of jewelry.

 

16. How to Make a Jewelry Tree with Jenny – John Greed

Sometimes, the simplest ideas are the best, and if that’s a sentiment you can agree with, this is a plan for you. Made of nothing more complicated than a small tree branch, a jar and a few pebbles, this is a design that will cost you next to nothing. As the blogger writes, you can make as many as you need to hang all your jewelry on, giving you a way to keep everything well-ordered and easy to access when you want to choose what to wear.

Check Details

 

17. DIY Jewelry Tree (Great for a Gift!)

This YouTuber suggests that this jewelry tree would make a great idea for a handmade gift, and while that’s true, we’re certain lots of people will be interested in creating one for themselves too. But regardless of who you’re making it for, this is an original design that we love – give the video a watch and see if you do too.

 

18. Resin Tree Branch Jewelry Organizer DIY! – Doodlecraftblog.com

In this tutorial, you’ll learn how to make a jewelry tree from a tree branch and some epoxy resin. In essence, you simply cover the branch in resin to make it more permanent, and the metallic copper color this blogger chose gives it a classy and stylish look. However, you’re also free to use any other color you like to give your jewelry tree your own personal touch.

Check Details

 

19. DIY Jewelry Tree from Mature Beauty

As this YouTuber writes in the introduction to her tutorial, this idea for a jewelry tree is fast, cheap and easy. She estimates you won’t need to spend more than about $15 to copy her design, and it would also be a great option to give someone as a gift. We love the way it looks at the end with all the necklaces hanging from the branches, and if you appreciate the style too, it should be a simple job to make one of your own.

 

20. DIY Branch Jewelry Holder – How to Make a Jewelry Tree

Here’s another simple idea for a jewelry tree that anyone will be able to recreate at home. Probably the only thing you’ll need to buy is some air-dry clay for the base, and once you have that, you’ll be able to make something like the tree in the photos in no time at all. Another great plan and a recommended read.

Check Details

 

21. Dollar Tree DIY – Jewelry Tree Stand

If you’re a fan of Dollar Tree DIY, this is a plan you should enjoy since it teaches you to make a jewelry display tree from supplies you can pick up at your favorite thrift store. Inexpensive doesn’t mean cheap looking though, as you can see from the video, so if you like the design, you can make one of your own for very little money.

 

22. DIY Jewelry tree – The Conscious Student

We love the photo at the top of this blog post – this is, without doubt, one of the classier jewelry trees we’ve seen. However, the materials needed to make it are no more complicated or expensive than a few twigs and an old vase – so if you like it as much as we do, what are you waiting for?

Check Details

 

23. DIY Jewelry Tree from Nessa Uribe

Judging by this video, this YouTuber certainly needed a jewelry tree – because she has such an extensive collection of jewelry to hang on it! When it’s finished and covered in all her rings, it looks like a work of art. It might not be so convenient to get them off again, but if you’re more interested in making something beautiful than creating a practical storage solution, this is a plan you should enjoy.

 

24. DIY Free People Inspired Jewelry Holder

In this video, you’ll learn how to make two different types of jewelry holders from tree branches, one for necklaces that you mount on the wall and another freestanding version for rings and bracelets. They’re both great ideas, and they’re also extremely easy to make, so check out the video and see if you’re inspired to have a go at doing something similar yourself.

 

25. DIY Jewelry Tree from North Texas Daily

This short video teaches you how to make an attractive jewelry tree from a couple of glitter-covered branches and a few colored pebbles. It’s such a simple idea, but it works well, so this could be a great solution if you’re looking for an attractive way to organize your jewelry.

 

26. DIY Tree Jewelry Stand from Yuki & Talent

This jewelry tree is made from nothing more than a tree branch and a jar of beans, so if you need an inexpensive jewelry storage solution, this could be just the thing. We love the simplicity of the idea – and we’re sure plenty of others will too.

 

27. How-To DIY Jewelry Display Tree for Rings and Bracelets

Here’s another simple idea for a jewelry tree made from dollar store supplies – and it’s another one that looks stunning when it’s done. The tutorial is short because there’s nothing complicated to explain, which means you can get started making one of your own right away!

 

Loads of creative ideas to inspire you

As you can see, there’s no shortage of creative and original ideas online that should help fire your imagination and inspire you to have a go yourself.

We’ve enjoyed collecting these plans for you, so we hope you’ve enjoyed watching and reading them all too. And above all, we hope we’ve helped you find the plan you needed to make a pretty jewelry tree of your own.

Wood in jewelry: use cases, properties, rules of care - articles about jewelry and jewelry

Wood is a material that can be no less beautiful than precious stones. It is used to make a variety of jewelry - women's earrings, necklaces, pendants. Is this beauty durable, and how to properly care for it?

Types of wood used

Almost any type of wood can be used to make jewelry. The main thing is that they have a dense structure, a beautiful pattern and color. Most commonly used:

  • wenge oak;
  • ebony;
  • pear;
  • bog oak;
  • poplar;
  • walnut;
  • black rosewood.

Petrified wood or tree agate is also used in jewelry. Its age is estimated in millions of years, and the structure contains inorganic compounds - chromium, cobalt, iron, quartz.

Properties of natural material

The properties of wood depend on the species, growing conditions and other factors. In jewelry, a material is usually used that has a uniform color, without third-party inclusions and stains. The palette of shades includes tones:

  • brown;
  • tan;
  • grey;
  • sand;
  • golden brown;
  • chocolate;
  • white and others.

The density of the woody substance for all species is about 1.54 g/cm3. Taking into account moisture and voids, this figure varies from 550 to 750 kg/m3 and higher.

Advantages and disadvantages

The popularity of wood jewelry is due to the increased interest in the "eco" direction. No toxic substances are used for their manufacture, and the production process itself is environmentally friendly. To emphasize the naturalness of the material, it is subjected to minimal processing, leaving the natural color and texture.

Other benefits of wood:

  • Light weight. Earrings with wooden inserts do not pull on the earlobes.
  • Cheap. Wood jewelry is usually inexpensive - the only exception is unique author's works.
  • Compatibility. The palette of shades characteristic of wood is universal: it suits everyone, regardless of the color of the eyes, hair, skin.
  • Originality. European brands actively use wood to create jewelry, but in our country this material is less common. You will definitely be the center of attention!

The disadvantage of wood jewelry is the fragility of the material. Special treatment helps to protect it from rotting and spoilage, but only for a while.

Processing technologies

In the manufacture of wood jewelry, laser cutting is actively used. With its help, you can create products of the desired shapes, decorate them with the finest patterns and ornaments. Often, the main workpiece is cut out with a laser, and the details are completed manually.

Wood can be covered with a thin layer of gold. The method is widespread not only in jewelry, but also in icon painting, the creation of furniture, and decor items. Natural material processed:

  • glue mixed with chalk powder;
  • liquid glass;
  • shellac.

Another common technology is the artificial aging of wood. For this purpose, a sandblasting machine or special compositions are used: the surface of the wood becomes embossed, as if its age is hundreds of years old. The effect of aging is also achieved with the help of etching, using chromium peak or iron sulfate.

How to care for wood jewelry

Jewelry containing wooden inserts must be protected from mechanical damage. Sharp metal fragments and protruding stones can easily scratch natural material, so you need to store such products separately. The best option is a box or case with several internal compartments.

The tree does not like:

  • the sun;
  • warm;
  • humidity;
  • household chemicals.

The wood inlays in the decoration may change color slightly over time. This is a natural process that cannot be avoided.

Related videos:

Jewelry casting

Gold alloying

The first step in casting is the preparation of the metal. We select gold by carat and color, which are necessary for each project. Every day we cast: 14 carat, 18 carat, 24 carat gold and platinum. When preparing a karat, the color of gold can be achieved by changing the alloys that are mixed with pure gold. The addition of nickel gives white gold, copper gives pink, and silver gives green to gold.
When alloying and casting our jewelry, we can be 100% sure of the quality of our precious metals.

Wax casting of rings

After the wax models are cut, they are attached to the wax "tree" and placed on the base. In this photo, the bases and models are placed in a capsule that will be filled with a heat-resistant plaster material called a backfill. Different filling mixtures are used with different characteristics for different metals and situations.

Jewelry wax burning process

After laying the capsule, with wax-containing models, they are placed in specialized furnaces, where the wax is burned at a temperature of up to 870 ° C for 12-16 hours. Correctly fired flasks, such as in this photo, do not have wax residues. What remains is a tree or sculpture. With the help of a centrifuge, we will fill the hollow chamber with molten precious metal.

Cast platinum

This is the last stage of casting platinum, after which the molten platinum will be placed in an empty flask. You can see the same models in platinum that were depicted in wax. After cooling the flask and metal, the gypsum is broken, the excess parts are removed, and a platinum "tree" appears before us. Models can now be cut from the tree and finished, now the necessary work can be continued.

Cast gold

We use a centrifuge to cast our gold rings and other jewelry.
After the flask is completely burned out and freed from wax and residues, the flasks are removed from the oven and placed in the fixtures in the centrifuge.

Melting gold

In this centrifuge, you can see the molten gold in the crucible. The spout on the crucible is attached to the open flask where the wax was burned. When the metal reaches the correct temperature, the centrifuge will open and the gold will flow freely through the spout into the empty cavity of the flask.

Centrifugal jewelry casting

Here you can see a hot centrifuge in motion. The flask fills with molten gold instantly, and the centrifuge will slowly spin to a stop until it cools down. When the flask cools, the gypsum will be removed from it.

Wax versus gold

Here is a before and after example of a simple wax tree and a finished wood with gold. On the left, you can see a carved wax model that is attached to a wax rod and base. A metal flask is placed above it. The flask is filled with a plasticizer and burned through. Empty cavities are filled with gold, and here is the result of casting gold in the photo.

Wax model for platinum

These butterfly wings are handmade and modeled in wax. The wings are attached to a wax tree and installed in a container that is filled with
plasticizer. The specially mixed slurry inserts are then cured and turned into a ceramic which is already a mold and can withstand extreme 1770°C, the temperature of molten platinum. Wax "Butterfly Wings" is burned in the flask for 12 hours at a high oven temperature, releasing the mold with a hollow imprint of the wings.

How platinum is poured

Burnt-out flasks with butterfly wings are placed in mounts in a high-frequency casting centrifuge. In this photo, a technician melts platinum with high frequency radio waves in preparation for casting. When the platinum reaches its optimum molten state, the centrifuge opens and the platinum pours into a free cavity that once held wax wings.

Platinum finishing

These are the two wings in the illustration above. After casting, the ceramic material is removed by boiling in acid for several hours. As a result, the butterfly weighs more than 85 grams. Over 255 grams of platinum was needed to fill out the forms correctly.

Learn more