How to make ribbon bow for christmas tree


How to Make a Bow for a Christmas Tree - Ribbon DIY

Here’s a holiday decorating idea that’s quick, super simple, and very inexpensive. Keep reading to learn how to make a bow for a Christmas tree. Ribbon Decor There never seems to be a shortage of things to purchase or collect to put on your tree! Christmas bows are an … Read More

Here’s a holiday decorating idea that’s quick, super simple, and very inexpensive. Keep reading to learn how to make a bow for a Christmas tree.

Ribbon Decor

There never seems to be a shortage of things to purchase or collect to put on your tree!

Christmas bows are an affordable and custom decor that you can make yourself. They add lots of color, shimmery beauty, they fill in gaps, but most importantly, give you creative control and continuity.

All you need is a roll (or two or three!) of beautiful wire-edged ribbon, a pair of scissors, and craft floral wire. I found my ribbon at Joann Fabrics. You can also find ribbon at most arts & craft supply stores, fabric stores, or online.

It’s very easy to make your own bows out of wire-edged ribbon. This is a wonderful budget-friendly way to level up your holday decor.

Christmas Tree Bows

Ribbon 4 inches wide in picture
Craft Floral Wire HERE
Scissors

Affiliate link in blue text.

How to Make a Bow

After you have your materials, the first step is to determine the length of ribbon you need by unrolling the ribbon and mocking one up to get an idea.

Play around with the ribbon to see how large you want your bow height and how long you’d like the tails. You can make it as small or large as you like, remember this Christmas tree is your very own work of art.

Next, you’re going to cut a short length of floral wire to bind the bottom of the bow. I cut mine 7 inches long and it was plenty. Have your wire ready for your next step.

When you are ready, fold your ribbon into a W of sorts, but form three points in the middle instead of one. See drawing below for additional help.

Now, gently fold up and scrunch together all of the four lower points. Wrap and hold them neatly in one bundle. Wrap the floral wire tightly around the “trunk” of the bow.

Pull both of the tails on each end out and shape them. Next, arch and form the three ribbon petals of your bow.

To finish off the tails of the bow, cut a chevron shape “V” into each end. To make nice and symmetrical, cut one end at a time. With right sides together, fold the tail end in half and clip diagonally out to the corners. Unfold and adjust the wire ribbon to your liking.

You are finished with your first bow! It gets easier and faster the more you make. I promise!

Instructions to Make a Bow

Below is a quickstart, step-by-step guide of how to make a bow for a Christmas tree. Pin and save.

When you are ready to display the bows on your Christmas tree, no are hooks needed. Just place them within the branches, curling and tucking as you go, so they look natural within the branches. I hope you like them!

Let me know if you make them yourself! Upload a picture in the comments to share. I’d love to see what you are making.❤️ 

xo,
Cindy

Explore More

SHOP for stores & products
INSPIRATION for project ideas
RECIPES for delicious food

START HERE for blog home

The blue-colored links contain affiliate links. See the shop page for more information.

Save

How to Make a Christmas Bow 4 Ways

There are so many fun ways to decorate for Christmas, but one great way to tie your decor (or gift wrapping) together is with Christmas bows! You can choose the ribbon and color scheme yourself to make your Christmas decorations extra special. If you’ve ever wondered how to make a Christmas bow like you see in pictures, look no further!

We’re going to show you how to make a Christmas bow out of ribbon four different ways, both big and small.

First, here are some things to take into consideration when purchasing your materials:

  • Consider double sided ribbon – Though double sided ribbon isn’t required for all of these bows, we recommend it if you’re worried about your ribbon getting twisted. Double sided ribbon ensures that the right side is always facing up!
  • Use wired ribbon for shape – If you want your bow to have a lot of shape or fullness, use wired ribbon so that it’s easier to arrange.
  • Sharp scissors are key – Sharp scissors leave clean cuts, and make it easy easy to cut through multiple layers and wired ribbon. We used fabric scissors.

Ready? Let’s get started!

 

How to Make a Classic Christmas Bow

Embed On Your Website

The classic bow is what everyone pictures when they hear the word “bow. ” It is the easiest of the four to make. You can use either regular ribbon or wired ribbon when making a classic Christmas bow. We used wired ribbon, which allowed us to mold the loops into full shapes rather than having them lay flat.

Directions

Step 1: Create three loops with your ribbon. Two that face upwards and one middle loop that faces downwards.

Step 2: Cross the right loop over the left loop so that the side with the tail hanging down faces out.

Step 3: Fold the right loop down through the center loop.

Step 4: Arrange your bow and enjoy!

 

How to Make a Double Bow

Embed On Your Website

For the double bow, we suggest using thin, non-wired, double-sided ribbon for best results. As you can see in the video, we use single-sided ribbon, which still works. However, one of the loops will be twisted, as you have to twist the ribbon on the second loop in step 2 so that the right side is still facing you.

Since you use your fingers as a guide when making these bows, they will be relatively small. You can apply the same technique using something wider, like chair legs, if you want to make a large double bow.

Directions

Step 1: Cut a length of ribbon. Ours was 18 inches long. Then, make a peace sign with your index and middle fingers and rotate them sideways. Place the ribbon over your index and middle fingers, leaving about 4 inches overlapping, and hold ribbon in place between your thumb and index finger.

Step 2: Wrap the ribbon down and around the back of your fingers once. Repeat one more loop so the ribbon is now facing downwards behind your middle finger.

Step 3: Bring the ribbon in front of your middle finger. The ribbon should still be facing downwards.

Step 4: Loop the ribbon up and behind your middle finger so that it is facing away from you.

Step 5: Bring the ribbon forward so it lays horizontally across the vertical loops of ribbon.

Step 6: Thread through the opening between your index and middle finger.

Step 7: Circle the tail back around so that it crosses the horizontal strip of ribbon, making an “x.”

Step 8: Pull the tail up behind the “x” and cinch the ribbon together, tightening the center.

 

How to Make a Gift Bow

Embed On Your Website

A voluminous bow is a great way to make your gift pop. If you want to go beyond solid-colored, store-bought gift bows, try making your own with patterned ribbon! We’ll show you how to make a gift bow in six easy steps.

One-sided ribbon is fine for this type of bow. You can use non-wired or wired ribbon, though wired ribbon gives the bow a better shape. Since you’ll be cutting through multiple layers of ribbon, you’ll need sharp scissors, like fabric scissors, to create this bow. The gift bow uses a lot of ribbon (we used nearly 5.5 feet in our 4. 5 inch wide bow), so if you plan on making multiple gift bows, be sure to stock up on ribbon.

Directions

Step 1: Measure how wide you want the bow, keeping the ribbon attached to the spool if you’re unsure how many layers you want.

Step 2: Fold that length inwards. Continue folding until you have the desired number of loops (one fold equals one loop). Once complete, cut the end of the ribbon. You’ll now have one big ring.

Step 3: Take the two ends of that ring and put them together so that they (and the loose end of the ribbon) are at the top center.

Step 4: Cut notches at the center of the ribbon. You should cut on the left and right sides about one-third of the way in on each side.

Step 5: Thread floral wire through the cuts and twist it tightly to secure.

Step 6: Pull and twist each loop to fill out your bow.

 

How to Make a Big Christmas Bow

Embed On Your Website

This large bow is the perfect wreath bow. Use it to decorate your greenery, or place on your door or staircase to add festivity to your home! Single-sided, wired ribbon is best for this project. If you’re unsure how big you want each loop, leave the ribbon on the spool while you’re creating the bow.

Directions

Step 1: With the right side of the ribbon facing up, determine how long you want the tail of your ribbon to be.

Step 2: From that point, twist the ribbon so the side closest to the spool is facing wrong side up.

Step 3: Grab the end where the wrong side is facing up and loop it down towards the tail and back around to create a circle. Twist the ribbon so right sides are facing up on both sides. You should now have your center loop.

Step 4: Fold the ribbon back towards the bottom of the center loop to create your first side loop.

Step 5: Twist the ribbon so that the right side faces up and create another loop on the opposite side.

Step 6: Repeat until you’ve filled out your bow with the desired number of loops

Step 7: Cut a piece of floral wire and thread through the center loop and around the rest of the bow. Twist to secure.

Step 8: Measure your second tail so it’s equal to the first and cut ribbon from the spool.

 

DIY Christmas Bow Styling Tips

Now that you know how to make Christmas bows, what are you going to use them for? Wrapping Christmas gifts is the obvious answer, but there are so many other unique ways you can decorate with bows and ribbons. Here are a few styling tips to inspire you.

    • Use mini bows as ornaments | Elise + Hope
    • Top your Christmas tree with a paper bow | Studio DIY
    • Complement your greenery with contrasting ribbon | Clean and Scentsible
    • Tie together your place setting | This Happiness Blog
    • Dress up your bows as characters | Living Locurto

Ribbon Christmas tree bows: master class

Christmas tree bows will be a wonderful addition to the festive decoration of the New Year's tree. They can be made with your own hands in just half an hour (or even less) in any quantities. The basis for the bows will be a packing tape made of nylon (organza) with wire reinforcement along the contour of the canvas. By the way, we trimmed the New Year's packaging for sweets with the same ribbon.

To make Christmas tree bows from ribbon you will need:

skein of gift wrapping tape;

narrow brocade ribbon to match the packaging;

scissors.

Do-it-yourself bows for the Christmas tree: master class

The size of the bows depends on several factors:

  • the size of the Christmas tree itself;
  • tape width;
  • of your personal ideas about beauty.

Therefore, we suggest you unwind and fold the ribbon you have a little, as shown in the photo below, in order to estimate how much ribbon it will take to create one bow.

Next, cut off a piece of tape of the desired length and use it as a measure, cutting the rest of the tape into segments of the same length.

With a narrow ribbon, everything is more or less clear: for each bow we took 20 cm of ribbon, given that the tails will cover the paw of the Christmas tree and would also be nice and provocatively sticking out in all directions.

Cut the narrow tape into pieces in the amount corresponding to the number of pieces of packing tape.

Pay attention to the cut of the brocade ribbon.

Wrap the packing tape in a ring with a small but expressive overlap: it will be a shame if the ends start to pop out.

Pinch the opposite end: for us, this will be the mark of the central part of the bow.

Align the ends of the tape with this tuck.

Align on the table.

In fact, the process will go very quickly, on one or two you will fill your hand, and the rest will be done just instantly.

How to lay the tape. I put it in two ways. The first - bringing the frames to one point, while the fabric of the tape was tucked inside the bow.


Another way is to simply lay the panel with an accordion, and both sides of the bow at the same time.

We intercept the formed bow with a narrow ribbon.

If necessary, move it a little, finding the middle, and tie it into two knots as tightly as possible.

We straighten the wings of the bow - according to the method described above, they turn out to be extremely neat.

How to make ribbon bows for a Christmas tree of different sizes

Everything is very simple: when forming a bow from existing pieces of ribbon, simply overlap the ends more or less. It turns out like this.

That's what we got.


How to store

Given that the tape is reinforced with flexible wire, you can take out the bows for the Christmas tree every year and spend time straightening them. And you can put them in a cardboard box or plastic container and always keep them in a state of festive readiness.

Happy holidays!


Eva Casio especially for the site Needlework master classes

New Year's bow on the Christmas tree from a ribbon, master class

! To facilitate this task, sales of all kinds of New Year's toys are gaining momentum in the supermarkets of our country: balls, stars, houses, cones, animals, snowflakes, bows and even fairy-tale characters ... you can’t count everything!

Some Christmas trees will be decorated in a strict design style, others will be full of all kinds of toys, others will be only rare collections...

This is all good, but you must admit, how nice it is to make New Year's toys with your own hands, in the circle of your family, saturated with emotions and fun loved ones! Not a single purchased toy will bring such an effect!

Our site brings to your attention a very beautiful New Year's craft with your own hands - a chic lush bow for the Christmas tree, made with your own hands from ribbons!

Photo of decorating the Christmas tree with bows

These bows can be made in a wide variety of colors and sizes. This Christmas tree decoration will fit perfectly into any style, whether it is strict, consisting of just such bows, or a cheerful children's one, where bows are a fun addition to a great variety of New Year's toys.

A very big "plus" of such ribbon bows for the Christmas tree is that they are made very quickly! In any hour you can make a dozen of these decorations!

Why so many bows? Well, firstly, your Christmas tree can only be decorated with ribbon bows, secondly, with the help of such bows you can arrange any New Year's wish, rolled up in a scroll and inserted into a festive bright bow, and thirdly, New Year's costumes, a table and a room can be also decorate with fun bows! However, depending on the application, adjust the size of the bow itself!

DIY Christmas tree bow, master class

Let's start our master class as soon as possible and you will learn all the stages of creating such a Christmas tree decoration.

Prepare and place in front of you:

  • Sharp scissors;
  • Bright ribbon 5 cm wide;
  • Ribbon, 2. 5 cm wide;
  • Thin ribbon only 0.5 cm wide;
  • Needle and thread to match the ribbons;
  • Regular lighter.

To make one bow, you need to cut the prepared ribbons into small pieces:

  • A piece of the widest ribbon (5 cm) 15 cm long - 4 pieces;
  • Pieces from a medium-sized tape (2.5 cm) 15 cm long - 5 pieces;

We select four ribbons of each width, carefully place a narrow ribbon on a wide one, and align it strictly in the center!

And now we are faced with a very important task: to ensure a tight fastening of two ribbons superimposed one on top of the other and take measures to prevent the ribbon cuts from loosening! An ordinary lighter will help us with this! Thanks to her intervention, we will kill two birds with one stone with a slight movement of the hand - we will get rid of loosening and “fuse” the tapes together!

This is done as follows: we bring a lit lighter to the edges of the ribbons and move it up and down - the edges begin to melt and burn (we do not let it burn, we blow it out).


Learn more