How to make ribbon bows for xmas tree


How to Make a Christmas Bow 4 Ways

There are so many fun ways to decorate for Christmas, but one great way to tie your decor (or gift wrapping) together is with Christmas bows! You can choose the ribbon and color scheme yourself to make your Christmas decorations extra special. If you’ve ever wondered how to make a Christmas bow like you see in pictures, look no further!

We’re going to show you how to make a Christmas bow out of ribbon four different ways, both big and small.

First, here are some things to take into consideration when purchasing your materials:

  • Consider double sided ribbon – Though double sided ribbon isn’t required for all of these bows, we recommend it if you’re worried about your ribbon getting twisted. Double sided ribbon ensures that the right side is always facing up!
  • Use wired ribbon for shape – If you want your bow to have a lot of shape or fullness, use wired ribbon so that it’s easier to arrange.
  • Sharp scissors are key – Sharp scissors leave clean cuts, and make it easy easy to cut through multiple layers and wired ribbon. We used fabric scissors.

Ready? Let’s get started!

 

How to Make a Classic Christmas Bow

Embed On Your Website

The classic bow is what everyone pictures when they hear the word “bow.” It is the easiest of the four to make. You can use either regular ribbon or wired ribbon when making a classic Christmas bow. We used wired ribbon, which allowed us to mold the loops into full shapes rather than having them lay flat.

Directions

Step 1: Create three loops with your ribbon. Two that face upwards and one middle loop that faces downwards.

Step 2: Cross the right loop over the left loop so that the side with the tail hanging down faces out.

Step 3: Fold the right loop down through the center loop.

Step 4: Arrange your bow and enjoy!

 

How to Make a Double Bow

Embed On Your Website

For the double bow, we suggest using thin, non-wired, double-sided ribbon for best results. As you can see in the video, we use single-sided ribbon, which still works. However, one of the loops will be twisted, as you have to twist the ribbon on the second loop in step 2 so that the right side is still facing you.

Since you use your fingers as a guide when making these bows, they will be relatively small. You can apply the same technique using something wider, like chair legs, if you want to make a large double bow.

Directions

Step 1: Cut a length of ribbon. Ours was 18 inches long. Then, make a peace sign with your index and middle fingers and rotate them sideways. Place the ribbon over your index and middle fingers, leaving about 4 inches overlapping, and hold ribbon in place between your thumb and index finger.

Step 2: Wrap the ribbon down and around the back of your fingers once. Repeat one more loop so the ribbon is now facing downwards behind your middle finger.

Step 3: Bring the ribbon in front of your middle finger. The ribbon should still be facing downwards.

Step 4: Loop the ribbon up and behind your middle finger so that it is facing away from you.

Step 5: Bring the ribbon forward so it lays horizontally across the vertical loops of ribbon.

Step 6: Thread through the opening between your index and middle finger.

Step 7: Circle the tail back around so that it crosses the horizontal strip of ribbon, making an “x.”

Step 8: Pull the tail up behind the “x” and cinch the ribbon together, tightening the center.

 

How to Make a Gift Bow

Embed On Your Website

A voluminous bow is a great way to make your gift pop. If you want to go beyond solid-colored, store-bought gift bows, try making your own with patterned ribbon! We’ll show you how to make a gift bow in six easy steps.

One-sided ribbon is fine for this type of bow. You can use non-wired or wired ribbon, though wired ribbon gives the bow a better shape. Since you’ll be cutting through multiple layers of ribbon, you’ll need sharp scissors, like fabric scissors, to create this bow. The gift bow uses a lot of ribbon (we used nearly 5.5 feet in our 4.5 inch wide bow), so if you plan on making multiple gift bows, be sure to stock up on ribbon.

Directions

Step 1: Measure how wide you want the bow, keeping the ribbon attached to the spool if you’re unsure how many layers you want.

Step 2: Fold that length inwards. Continue folding until you have the desired number of loops (one fold equals one loop). Once complete, cut the end of the ribbon. You’ll now have one big ring.

Step 3: Take the two ends of that ring and put them together so that they (and the loose end of the ribbon) are at the top center.

Step 4: Cut notches at the center of the ribbon. You should cut on the left and right sides about one-third of the way in on each side.

Step 5: Thread floral wire through the cuts and twist it tightly to secure.

Step 6: Pull and twist each loop to fill out your bow.

 

How to Make a Big Christmas Bow

Embed On Your Website

This large bow is the perfect wreath bow. Use it to decorate your greenery, or place on your door or staircase to add festivity to your home! Single-sided, wired ribbon is best for this project. If you’re unsure how big you want each loop, leave the ribbon on the spool while you’re creating the bow.

Directions

Step 1: With the right side of the ribbon facing up, determine how long you want the tail of your ribbon to be.

Step 2: From that point, twist the ribbon so the side closest to the spool is facing wrong side up.

Step 3: Grab the end where the wrong side is facing up and loop it down towards the tail and back around to create a circle. Twist the ribbon so right sides are facing up on both sides. You should now have your center loop.

Step 4: Fold the ribbon back towards the bottom of the center loop to create your first side loop.

Step 5: Twist the ribbon so that the right side faces up and create another loop on the opposite side.

Step 6: Repeat until you’ve filled out your bow with the desired number of loops

Step 7: Cut a piece of floral wire and thread through the center loop and around the rest of the bow. Twist to secure.

Step 8: Measure your second tail so it’s equal to the first and cut ribbon from the spool.

 

DIY Christmas Bow Styling Tips

Now that you know how to make Christmas bows, what are you going to use them for? Wrapping Christmas gifts is the obvious answer, but there are so many other unique ways you can decorate with bows and ribbons. Here are a few styling tips to inspire you.

    • Use mini bows as ornaments | Elise + Hope
    • Top your Christmas tree with a paper bow | Studio DIY
    • Complement your greenery with contrasting ribbon | Clean and Scentsible
    • Tie together your place setting | This Happiness Blog
    • Dress up your bows as characters | Living Locurto

How to Make a Bow Christmas Tree Topper

by Courtenay 17 Comments

In this post I’ll show you how to make a bow Christmas tree topper! This is an easy and elegant solution that you can easily customize to match any tree decor!

Have you ever noticed that it’s really hard to find just the right topper for your Christmas tree? I don’t think I’ve ever found one that I really love and that works for me year after year, no matter what type of tree-scheme I’m doing that year. I find that store bought ones always seem just a little too cheesy, or a little too rustic, or a little too tacky. I’ve ended up using a whole bunch of berry picks from the floral section of the craft store, along with other unusual items to try to make my own, and that usually works quite well, but I picked up an extra roll of ribbon this year that I really wanted to use somewhere, so I decided to try my hand at a big, fluffy bow Christmas tree topper. It turns out that they’re pretty easy to put whip up!

This post is part of the December edition of the Thrifty Style Team project. Be sure to scroll all the way down to the bottom of my post to see all the other thrifty projects from other talented bloggers on the team! Wired ribbon can get pretty expensive, but it also goes on sale quite a bit around this time of year, so if you still don’t have a topper for your tree, you can make one of these quite affordably! Also keep in mind to search the after Christmas sales for clearance ribbon that you might want to use for this project next year!

Supplies Needed to Make a Bow Christmas Tree Topper

I used:

  • Wide wired ribbon. My roll was 25 feet long and I used basically all of it for this one bow.
  • Pipe cleaners (floral wire would work too of course, I just used what I had when inspiration struck, which happened to be way too many pipe cleaners. #momlife)
  • Scissors

The things that I love about this is that you can reuse all of the supplies that go into making this bow topper in a different way next year if you want a different color of ribbon for your next tree. So this is a really practical and inexpensive tree topper solution!

How to Make the Bow Tree Topper

The process for making the bow basically involves creating as many loops as you want and then securing them tightly at the bottom of your bow to hold the whole thing together.

To make your first loop, unravel about 12 inches of ribbon from your roll, and create a loop. Next, create another loop by pulling out more ribbon and creating kind of a figure 8, then pinch both loops together at their bases.

Continuing creating loops until you have the full, fluffy bow that you were hoping for. My bow has ten loops for reference. I could have gone for more, but you do want to leave a little bit of extra ribbon so that you can create matching streamers to hang down from your bow topper over the top 1/3-1/2 of your tree.

When you have all of your loops done, pinch them all tightly together at the base and wrap them tightly in floral wire or pipe cleaners.

How to Make the Streamers for Your Tree Topper

Cut three to four lengths of ribbon that are about two feet long to use as your streamers. Cut the end that will be dangling down over you tree on an angle for a nice finished look. To secure my streamers, I just wrapped the top few inches of each right around the top of my tree. Since the ribbon is wired, it holds quite well and looks tidy.

Finish the topper by resting the bow on the top few branches of your tree. Feel free to make it even more spectacular by adding in some floral picks, or by using twigs and other natural elements that you gather from outside! I gathered some phragmites from the banks of our creek and tucked it in all over our tree for something a little different. I saw phragmites used in all kinds of beautiful holiday displays when I was in Old Montreal recently so I just had to try it out for myself. 🙂

Do you create your own tree toppers or have you found a store-bought one that you absolutely love?

Grad yourself a cup of hot chocolate and spend some time checking out these other great Thrifty Style ideas as well!

DIY Mason Jar Centerpiece – Chatfield Court
How to Make a Bow Christmas Tree Topper – The Creek Line House
Easy Thrifty Outdoor Peppermint Pillow Wraps – DIY Beautify
Dollar Store Olive Appetizer Wreath -Redhead Can Decorate
Recycled Metal Seat Door Wreath – Bliss Ranch
How to Make Scented Pine Cones – I Should Be Mopping the Floor 
Champagne Bucket Christmas Tree Stand – Postcards from the Ridge
Thrifty and Easy hostess gifts – Duke Manor Farm
Dollar Store Duster Christmas Wreath– The How-To Home
Christmas Cloche Centerpiece Ideas – 2 Bees in a Pod
Vintage Thrifted Christmas Tablescape – What Meegan Makes
DIY Snowman Ornaments – Cottage at the Crossroads
Rustic Leather Magazine Holder – Unskinny Boppy
Vintage Drawer Pull Clipboard – Jen Rizzo

Filed Under: Christmas, Uncategorized

New Year's bow on the Christmas tree from a ribbon, master class

Every year, on New Year's Eve, all the inhabitants of our country are busy with one IMPORTANT occupation - everyone decorates their New Year tree! To facilitate this task, sales of all kinds of New Year's toys are gaining momentum in the supermarkets of our country: balls, stars, houses, cones, animals, snowflakes, bows and even fairy-tale characters . .. you can’t count everything!

Some Christmas trees will be decorated in a strict design style, others will be full of all kinds of toys, and others will be only rare collections…

This is all good, but you must admit, how nice it is to make New Year's toys with your own hands, in the circle of your family, saturated with emotions and fun of loved ones! Not a single purchased toy will bring such an effect!

Our site brings to your attention a very beautiful New Year's craft with your own hands - a chic lush bow for the Christmas tree, made with your own hands from ribbons!

Photo of decorating a Christmas tree with bows

These bows can be made in a wide variety of colors and sizes. This Christmas tree decoration will fit perfectly into any style, whether it is strict, consisting of just such bows, or a cheerful children's one, where bows are a fun addition to a great variety of New Year's toys.

A very big "plus" of such ribbon bows for the Christmas tree is that they are made very quickly! In any hour you can make a dozen of these decorations!

Why so many bows? Well, firstly, your Christmas tree can only be decorated with ribbon bows, secondly, with the help of such bows you can arrange any New Year's wish, rolled up in a scroll and inserted into a festive bright bow, and thirdly, New Year's costumes, a table and a room can be also decorate with fun bows! However, depending on the application, adjust the size of the bow itself!

Christmas tree bow, master class

Let's start our master class as soon as possible and you will learn all the stages of creating such a Christmas tree decoration.

Prepare and place in front of you:

  • Sharp scissors;
  • Bright ribbon 5 cm wide;
  • Ribbon, 2.5 cm wide;
  • Thin ribbon only 0.5 cm wide;
  • Needle and thread to match the ribbons;
  • Regular lighter.

To make one bow, you need to cut the prepared ribbons into small pieces:

  • A piece of the widest ribbon (5 cm long) 15 cm long - 4 pieces;
  • Pieces of medium-sized tape (2.5 cm) 15 cm long - 5 pieces;

We select four ribbons of each width, carefully place the narrow ribbon on the wide one, and align it strictly in the center!

And now we are faced with a very important task: to ensure a tight fastening of two ribbons superimposed one on top of the other and take measures to prevent the ribbon cuts from loosening! An ordinary lighter will help us with this! Thanks to her intervention, we will kill two birds with one stone with a slight movement of the hand - we will get rid of loosening and “fuse” the tapes together!

It is done like this: we bring a lit lighter to the edges of the ribbons and move it up and down - the edges begin to melt and burn (we do not let it burn, we blow it out). We should get an even fused cut:

See how four blanks should look like:

We bend our tape blanks in half. It's time to put all the details of our bow together.

Using a normal basting stitch for assembly, this is what it should look like:

We pull it together well, fasten it - we got this blank:

As you remember, we still have one more piece of tape left unused, 2.5 cm wide. Its time has come. We put this segment in front of us, visually mark its middle and sew along this line with the already familiar overcast seam:

You don’t need to cut the thread, just sew the ribbon to the finished workpiece.

And now let's remember about one more thin ribbon! With this ribbon. With a width of only 0.5 cm, we will carefully tie a bow in the center, decorate the middle, tie a loop - BOTTOM FOR THE CHRISTMAS made by yourself, completely ready!

I think. That your collection will not be limited to one bow, and the included fantasy will work with a vengeance, especially when it sees the result of its work:

Fantasize, dare, be creative . .. luck is on your side!

Do-it-yourself ribbon bows for the Christmas tree, 7 master classes

The stores have a huge assortment of beautiful Christmas toys, stars, cones, bows and many other New Year's accessories. Factory production produces beauty in large quantities and it can be found on the Christmas tree in different families - and that's good! However, you want to do something special and unique, and your skillful hands will help you with this. In this article we will look at: how to make bows for a Christmas tree from ribbons with your own hands.

Content

  • 1 chic bant of satin ribbons
    • 1.1 Master class
  • 2 Flower bant from tapes
    • 2.1 Master class
    • 3 Original Balti from risks
      • .1 Master class
    • 4 Christmas ribbon bow
      • 4.1 Master class
    • 5 Classic satin ribbon bow
      • 5.1 Master class
      • 9004 5 6 bow0032
      • 6. 1 Master class
    • 7 Extravagant Bant of satin ribbons
      • 7.1 Master class
    • Shikan ban from satin ribbons

      9000

      You will need: Krasnaya tape 5 cm. 2.5 cm, white ribbon 0.5 cm wide, needle, thread, lighter, scissors.

      Workshop

      1. Prepare 4 pieces of 15 cm each from a red 5 cm ribbon.
      2. Prepare 5 pieces, each 15 cm long, from 2.5 cm wide white tape.
      3. Melt the ends of the ribbons using a lighter.
      4. Fold the workpieces in half.
      5. Assemble the bow from the blanks using a thread with a needle. Carefully do this work with a basting seam.
      6. Pull and fasten the thread.
      7. Sew the remaining white ribbon into the center of the bow.
      8. Prepare a piece of the thinnest white ribbon and sew it as a pendant to the length you need.

      A chic satin ribbon bow is ready! I recommend watching this video!

      DIY crafts - How to Make Bow / Simple Way to Make ribbon bow / diy decorative bow / Julia DIY


      Watch this video on YouTube width, scissors, thread with a needle, lighter, rhinestone.

      Workshop

      1. Prepare 7 pieces of the same size.
      2. Fold the piece in half and cut the ends diagonally. Repeat this process with all segments.
      3. Melt the ends of the ribbons using a lighter.
      4. Thread the pieces with a needle as shown in the picture.
      5. Tighten and secure the bow.
      6. Prepare a thin ribbon and fasten it in the center.
      7. Attach a rhinestone to the center of the bow.
      8. Prepare a piece of ribbon and sew it as a pendant in the length you need.

      The ribbon flower bow is ready!

      Original ribbon bow

      You will need: textured ribbons of two colors of the same size, scissors, lighter, thread, needle.

      Workshop

      1. Prepare 2 pieces of the same size in each color.
      2. Fold in half and cut the ends diagonally.
      3. Melt the ends of the ribbons using a lighter.
      4. Fold the ribbons in a cross pattern and sew in the center.
      5. Tighten the thread, wind it around the center and fasten off.
      6. Prepare a thin piece of ribbon and decorate the center.
      7. Prepare a piece of ribbon and sew it as a pendant to the desired length.

      The original ribbon bow is ready! I recommend watching this video!

      How to make a BOW FROM A RIBBON of any size / Satin ribbon Bow / ✿ NataliDoma


      Watch this video on YouTube

      Christmas ribbon bow

      You will need: textured ribbons of different widths, scissors, lighter, thread, needle.

      Workshop

      1. Prepare a piece of the widest tape. It will be the base and should be larger than the other two parts.
      2. Fold it 3 times.
      3. Gather in the center and tighten with string.
      4. Wrap the thread around the center, then fasten off.
      5. In the same way form the middle bow, it should be smaller than the previous one.
      6. Sew the bows in the center.
      7. Form a small third bow and sew it to the two bows in the center.
      8. Prepare a thin piece of ribbon and decorate the center.
      9. Make 10 small equal cuts and twist them with scissors.
      10. Sew the pieces together to form a curly flower, then sew into the center of the bow.

      Christmas ribbon bow is ready!

      Classic satin ribbon bow

      You will need: 5.5 cm wide satin white ribbon, gold cord or other pendant, 3 gold sequins and 3 beads, needle, thread, scissors, lighter.

      Tutorial

      1. Prepare a ribbon 55 cm long.
      2. Fold in half and cut the ends diagonally.
      3. Melt the ends of the ribbons using a lighter.
      4. Fold the ribbon into a bow shape as shown.
      5. Sew the center of the bow with thread, then pull off.
      6. Prepare a 5x5 cm square of white ribbon.
      7. Melt the cuts with a lighter.
      8. Fold the square in half, sew along the edge and turn inside out.
      9. Place this strip around the center of the bow and sew at the back.
      10. Sew on sequins and beads.
      11. Prepare a cord 14 cm long, form and sew a loop.

      The classic satin ribbon bow is ready! I recommend watching this video!

      Satin ribbon bow 🎀Laço de Cetim 🎀 Satin Ribbon bow 🎀laço de fita


      Watch this video on YouTube

      Festive bow

      You will need: red transparent ribbon with a pattern 5 cm wide, red nylon thin ribbon, thread, needle, scissors.

      Master class

      1. Fold the tape in such a way that you get a loop.
      2. Make a loop on the other side to make a figure eight.
      3. Flatten the ribbon into a bow shape as shown.
      4. Tie down the center with thread.
      5. Prepare a thin red ribbon 24 cm long, wrap one end around the center of the bow and fold the other end into a loop.
      6. Secure the tape with stitches.

      Festive ribbon bow is ready! I recommend watching this video!

      Lush ribbon bow 2.5cm DIY kanzashi BOW


      Watch this video on YouTube

      Extravagant satin ribbon bow

      You will need: 5.5 cm wide satin beige ribbon, thin green ribbon, thin red ribbon, thread, needle, scissors, lighter, sequin and bead.

      Tutorial

      1. Prepare a 36 cm long beige ribbon.
      2. Fold it into a bow shape as shown in the image.
      3. Make a random bow with thin ribbons.
      4. Secure in the center with stitches and leave a piece of thin ribbon for the future eyelet.
      5. Form a loop and sew it on.
      6. Sew the bows together.
      7. Sew on the sequin and bead.

      Extravagant satin ribbon bow is ready! I recommend watching this video!

      Beautiful bow of satin ribbons .


      Learn more