How to remove christmas tree sap from wood floor


Removing Christmas Tree Stains from Hardwood Flooring (Tips.Net)

Written by April Reinhardt (last updated November 20, 2017)

While a live Christmas tree during the holidays can fill your home with a wonderful aroma, it can also leave behind pine needles, stains, and sap. If you place your tree onto a hardwood floor, removing pine needles may not prove much of a challenge. However, removing tree sap stains from hardwood flooring can prove difficult.

Even if you use a tree skirt under your tree, sap and tree stains can permeate the fabric and come to rest as a solid on your hardwood flooring. Whether you have real wood flooring or laminate, try some of these methods for removing Christmas tree stains from your hardwood flooring:

  • Alcohol. Pour a clear alcohol, such as Vodka, onto the stain and allow it to sit for at least thirty minutes, and then absorb with paper toweling.
  • Bug spray. Spray bug repellant, such as Deep Woods Off, onto the tree stain and then agitate with a stiff nylon brush and rinse away.
  • Ice. Rub the stain with ice and then gently scrape away excess sap and stain with the end of a rubber spatula.
  • Citrus solvents. A citrus-based solvent, like Goo-Gone, breaks down adhesives so that you can remove them. Gently rub a generous amount onto the stain, and then wipe away.
  • Isopropyl rubbing alcohol. Pour the alcohol onto a rag, rub the stain, and then buff away.
  • Lubricant. Spray a lubricant like WD-40 onto the stain and then wipe away. Continue the process until the stain disappears.

Exercise caution when using products that contain alcohol or petroleum-based products, as they are flammable. Also, test an inconspicuous area of your hardwood flooring with the product to determine if it will remove the finish or cause discoloration. You may even want to speak with local flooring professionals to determine the best course of action when removing Christmas tree stains from your hardwood flooring.

Author Bio

April Reinhardt

An admin­istrator for a mutual fund man­age­ment firm, April deals with the writ­ten word daily. She loves to write and plans to author a memoir in the near future. April attend­ed More­head State Uni­ver­sity to pursue a BA degree in Ele­men­tary Edu­ca­tion. Learn more about April...

Remove Stubborn Stains Quickly Get everything looking clean again: Walls, floors, baseboards, counters, blinds, appliances, and more. Micro-scrubbers easily reach into surface grooves, lifting dirt away. This low-cost 8-pack is great for stubborn stains and touble areas. Check out Mr. Clean Magic Eraser 8-Pack today!

Subscribe

FREE SERVICE: Get tips like this every week in Cleaning Tips from Tips.Net. Enter your address and click "Subscribe."

View most recent newsletter.

(Your e-mail address is not shared with anyone, ever.)

Comments

Newest Tips

Subscribe

FREE SERVICE: Get tips like this every week in Cleaning Tips from Tips. Net. Enter your address and click "Subscribe."

(Your e-mail address is not shared with anyone, ever.)

View the most recent newsletter.

Links and Sharing

  • Questions or Comments
  • Free Calendars

Copyright © 2022 Sharon Parq Associates, Inc.

How to Remove Christmas Tree Sap from Clothes, Rugs & Fabric

The scent of a real Christmas tree is one of the most iconic aromas of the holiday season. That said, bringing a real tree inside – or even hanging real pine garlands and wreaths on the exterior of your home –means dealing with tree sap, as well.

As you (sadly) take your Christmas tree and decorations now, inevitably, some Christmas tree sap will land on the carpet, your clothes, a favorite upholstered chair or even your skin and potentially create a very sticky situation.

Use these tips from the home cleaning experts at ServiceMaster Clean to learn how to remove tree sap from fabric, carpet fibers and more.

How to Remove Tree Sap from Skin

Any time you’re handling a real Christmas tree, it’s best to wear protective gloves, long sleeves and long trousers to protect your skin from sap. If Christmas tree sap does contact your skin, it typically takes more than a little soap and warm water to remove.

The best way to remove tree sap from skin is with hand sanitiser or rubbing alcohol. Apply either solution directly to the area and gently rub with a damp cloth to remove. Wash the area afterward with warm, soapy water to remove any residual cleaning solution.

How to Remove Tree Sap from Clothing

Tree sap loves clinging to fabric, especially clothing. Removing Christmas tree sap from clothing isn’t difficult, but you do need to take a few precautions to prevent damage to the fabric or dyes.

For heavier fabrics like denim or flannel, try spraying a little WD-40 onto the stain and gently rub it with a clean, dry cloth to loosen the sap. Rinse with warm water, and then apply a layer of liquid laundry detergent as a stain agent as needed. Launder the clothing normally. For fabrics like fleece or cotton, try using mineral oil instead. The oil can help loosen and remove Christmas tree sap before you try laundering with normal methods.

Tip: Always test the cleaning product or solution you choose on a small, inconspicuous area of the fabric to ensure it won’t damage the fibers or dyes.

How to Remove Tree Sap from Carpets and Furniture

The principle behind getting Christmas tree sap out of anything is lubrication. Lubrication lets sap slide more easily off of fabric and carpet fibers, making it easier for you to clean the affected area. Like with clothing, you can use household items commonly found in your kitchen cupboards to get tree sap out of carpets and furniture. Also like clothing, you should always test a small, inconspicuous area on your carpet or furniture first to prevent damaging the fibers.

Non-chlorine liquid dish detergent can help gently loosen Christmas tree sap from carpet fibers. You can also use mineral oil, which is great at getting sap off of upholstered furniture, hardwood floors and tile, too. To use either method, apply a small amount of dish detergent or mineral oil to the sap stain. Gently rub the area with a clean, dry cloth, and then rinse with a clean, damp cloth and warm water.

If Christmas tree sap has already stained your furniture, floors or carpet fibers, contact the professionals at ServiceMaster Clean. Our expert stain removal teams have the training and tools to safely and effectively remove sap, odors and all kinds of stains from any room in your home. Don’t let a little sap stop your holiday fun – leave the dirty work to the professionals and get back to enjoying this beautiful season with your family and friends.

For more help and advice, find your local ServiceMaster Clean business.

Resins 🥝 how to dissolve, how to get rid of, how to clean

  • Why remove the resin?
  • What you need to know about resin?
  • How to remove resin from a board?
  • Other methods and means
  • Safe recipes
  • When the walls are already sheathed
  • Footage

The interior made of natural wood looks very solid, presentable, soft and pleasant. Coniferous material is especially valuable, which also contributes to the natural healing of all residents of the house during operation. But there is one problem that arises when laying softwood - how to get rid of resin on the boards, which must be solved correctly. How to remove resin from a tree in a pine bath or steam room? That is what this article will be about.

back to contents ↑

Why remove the resin?

Coniferous wood species such as pine, spruce, larch are unusually beautiful, but they emit natural resins not only after sawing, but also during growth. This resin is a very viscous, fluid substance, so the process of interior decoration is much more complicated, because:

  1. Boards in places where the resin flows out become extremely sticky and quickly adhere to any tools and materials that they come into contact with.
  2. Gum bleeds usually appear a little darker than the entire board, so a uniform finish cannot be achieved.
  3. Staining with a leaking substance is impossible, and unprofitable. Paint or varnish will not harden on resin stains, respectively - there will remain convex, unprotected from the harmful effects of moisture, areas of the coating that stand out by their color.

back to contents ↑

What do you need to know about resin?

Resin removal is best done only after the board has been sanded. Although compliance with this rule will not be a guarantee that the "resin" will not prove itself again. Sometimes such a substance begins to ooze under the influence of certain factors after the finishing work is completed. This factor must be taken into account before giving preference to coniferous decoration of the house.

back to table of contents ↑

How to remove resin from a board?

In order to correctly prepare all the elements for laying the floor, wall sheathing or ceiling, it is necessary to correctly get rid of the resin on the boards. This can be done in several ways.

Mechanical removal

In this case, in order to remove the resin from the boards, it is necessary to wait for the complete solidification of the fluid mass. Then, armed with a knife, remove each piece by hand.

Important! After removing all unwanted sagging, it is necessary to sand the surface of the wood with sandpaper or a special tool.

Solvents

You can also use household chemicals to dissolve the resin. The following agents are suitable for this purpose:

  • alcohol;
  • white spirit;
  • turpentine;
  • refined gasoline;
  • acetone;
  • nitro thinner.

Important! The use of any of these solvents does not affect the structure and shade of softwood. But when using it, it is advisable to protect yourself with gloves, a respirator so that caustic volatile vapors do not provoke irritation of the skin and mucous membranes.

to contents ↑

Other ways and means

You can also get rid of resin on the boards with the help of folk methods, which consist in the use of available kitchen and pharmacy solutions, powders.

The following methods effectively help to solve the problem:

  • Ammonium chloride or ammonia solution. Such a tool is diluted with acetone in a ratio of 2: 1. Apply to the surface with rubbing movements until foam is formed. Remains of foam and resin are removed after 20 minutes with a clean, damp cloth.
  • Potash and soda in equal proportions (50 g each). Both substances are mixed and poured into 1 liter of hot water. To enhance the effect, you can add 250 ml of acetone.
  • Caustic soda. It is dissolved in half a liter of cold water. You can also add 250 ml of a solvent such as acetone.

Important! Any of these products can only be applied to a sanded, but not painted surface. Otherwise, acetone will dissolve the paint and the finished finish will not look the most attractive way.

back to contents ↑

Safe recipes

In order not to damage the wood either mechanically or chemically, or in case of a small amount of resin, use the following products to get rid of the resin on the boards:

  • 25 g of wood or any liquid soap mixed with 50 ml of ammonia and 1 liter of hot water;
  • acetic solution of concentrated acid and water in a ratio of 1:50.

Important! The last resort is also well suited to remove alkali residues after using any other substance or solution to get rid of the resin on the boards. It helps a lot, including when you wash ready-made walls and you need to remove the remnants of the cleaner from the joints of the crowns.

back to contents ↑

When the walls are already sheathed

If the resin began to appear from the boards after they were laid on the walls, it is unlikely that you will have the desire to spend a lot of time pointwise removing each piece of “resin” with solvents or a knife.

In this case, you can burn through all the places of formation of coniferous tree sap with a blowtorch, then clean them with sandpaper of a suitable grit.

to content ↑

Video

When choosing a softwood board, remember that you will not be able to completely get rid of the resin on the boards. It can appear at any, the most unexpected moment for you. But this is actually not such a global problem, because it is possible to remove the “sap”, and the beauty, environmental friendliness and benefits of such wood cannot be compared with any modern plastic or other material. Let your home be filled with only the pleasant aroma of pine needles and always look cozy. And with minor resin problems, you now know how to deal with it.

How to get rid of pine resin

A live Christmas tree gives not only a festive atmosphere, but also crumbling needles complete with sticky juice. To get rid of the latter, you can either dry it or dissolve it.

  • 1 of 1

Pictured:

It is impossible to find a replacement for a real live Christmas tree or pine. These trees give us a charming smell of pine needles, a festive feeling from the presence of a living and beautiful symbol of the New Year in the house. However, even when cut down, they require a lot of attention. And needles are not the only problem. To get rid of it after the holidays, in general, it is enough to sweep and vacuum a couple of times. But in addition to crumbling needles, spruce and pine give us sticky tree sap. You will have to tinker with the spots that coniferous resin forms on different surfaces.

There are several household products that can help you clean pine resin from carpet and household items. It is removed in much the same way as chewing gum. The easiest way is to harden the structure of the tree sap and chip it, the other way is to dissolve it.

1 Rubbing in alcohol or hand sanitizer: These substances will help dry out the sticky sap and subsequently remove it. Soak a small piece of cloth or paper towel in rubbing alcohol, then lightly blot the stain with it. Don't rub it or you'll only make the problem worse! Repeat this step as needed. When the resin is dry, gently scrape it off the surface.

2 Ice: in this case, the ice will act in the same way as in the situation with gum in the hair. However, this method takes more time, and the ice tends to melt. If you do end up on it, put ice on the affected areas. When the resin hardens, separate it from the surface.

3 Dishwashing liquid: Apply a small amount of detergent (test on a small area first) to the stained area and rub with a cloth lightly dampened with warm water.


Learn more