How to remove unwanted tree roots

How To Kill a Tree Stump (2022 Guide)

Affiliate Disclosure: This Old House‘s Reviews Team is committed to delivering honest, objective, and independent reviews on home products and services. To support this business model, This Old House may be compensated if you purchase through links on our website.

From home remedies to professional solutions, here’s everything you need to know about getting rid of a tree stump in your yard.

Reviews by This Old House Reviews Team 10/05/2022 2:05 pm

Cutting down trees in your yard is a great way to improve the natural lighting for other plants and make way for new trees to grow. If you’ve removed a tree in your yard, you know how pesky its leftover stump can be.

While you could leave it alone, it could start to grow, sprouting annoying shoots from its roots, or it may take years to naturally rot and decompose. Try the following techniques to kill the tree stump and remove it from your yard or find a tree removal expert to take care of it for you.

Home Remedies for Tree Stump Removal

Here are a few ways you can get rid of a tree stump before getting your hands dirty with physical removal.

Epsom Salt

This is a common DIY method for killing tree trunks, as it accelerates the decomposition process to 6–12 months, as opposed to three to seven years for natural rotting. Epsom salt contains magnesium and sulfur, which are beneficial to plants but deadly in large quantities. Overdosing the stump with Epsom salt pulls the moisture out of it, killing it and accelerating the decaying process.

Here’s how to use Epsom salt to kill a tree stump:

  1. Drill deep holes in the stump about an inch wide with a power drill and a wide drill bit.
  2. Sprinkle the stump with water after covering the top of the stump with Epsom salt.
  3. Cover the stump with a tarp to keep the rain from washing away the substance.
  4. Repeat this process every few weeks to ensure its success.

If this process is successful, the stump will die within two to three months and be close to full decay after a year. This is a great solution for homeowners who want a slower, natural approach to killing their tree stump.

Rock Salt

Similar to Epsom salt, rock salt can help kill and decay a stump with minimal effort. Here’s how to kill a tree stump with rock salt:

  1. Drill holes into the stump.
  2. Pack the holes with rock salt.
  3. After all of the holes are packed and the stump is covered in salt, pour soil and mulch over the stump.
  4. Then, pour water over the mulch—this will dissolve the salt, help the roots absorb the solution, and pack the soil.

Keep watering the stump every few days for one to two months to keep the stump moist with the saltwater solution, promoting absorption and the growth of fungi that can accelerate the stump’s decomposition. You can also add a potassium nitrate fertilizer to further support the growing fungi.

Plastic Bag or Tarp

Perhaps the easiest method to kill a tree stump is forcing darkness on it. Without sunlight, the tree stump will die, accelerating the decomposition process. Rotting should start to take place in two to three months.

Here’s how to kill a tree stump with a plastic bag or tarp:

  1. Similar to other methods, cut the stump as close to the roots as possible with a chainsaw, hatchet, or handsaw.
  2. Cover the stump with a black trash bag.
  3. Weigh the bag down with heavy rocks or bricks. For a smaller stump, use a dark-colored bucket or container to cover the stump.

This technique requires little to no effort, but it can be slower compared with the physical removal methods.

Boiling Water

You don’t need to purchase any substance or solution to try this remedy—all you need is hot water.

  1. Expose as much of the stump’s root structure as possible.
  2. Drill holes into the roots and on top of the stump—this will help the scalding water reach as much of the root system as possible and kill the roots with heat.
  3. Once all the roots are exposed, pour boiling water over them. The heat from the water will shock the root system, severely damaging it and killing it.

Once the stump and roots are dead, the natural decomposition process can begin.

Techniques To Physically Remove a Tree Stump

If you have the time and resources to use physical methods to kill and remove your tree stump, consider the following techniques. Compared to home remedies, they are much quicker but take a bit more effort, tools, and money to perform.

Use Fire To Kill a Tree Stump

Use some kindling or kerosene to burn the stump so that it doesn’t protrude from the ground. This method will kill the tree, but it won’t completely get rid of the tree roots and stump. Keep in mind that this may not be an option if you live in an area with a dry climate that’s prone to wildfires. Check with your local fire department to see if burning a tree stump falls in line with the local fire code.

Once you have approval to burn your tree stump, there are a few ways you can move forward. You can drill holes into the trunk, pour kerosene into each hole, light scrap wood on the surface of the stump, and carefully monitor the wood as it burns. This method is slower, but it burns the wood from deeper within the stump.

You can also cut criss-cross lines in the wood that are about five to six inches deep with a chainsaw, then simply light some kindling on top and monitor the stump until it’s burned down below ground level.

Dig the Tree Stump Out of the Ground

Digging out a tree stump is one way to remove it from your yard, but it can require time-consuming work that can be potentially destructive to your yard or garden. This method allows you to remove as many tree roots as possible and ensure that the stump doesn’t continue to grow. To save time and effort, consider hiring a professional with digging equipment to handle the job.

Here’s how to dig a tree stump out of the ground:

  1. Dig around the stump, exposing as many roots as possible.
  2. Use a chainsaw, hatchet, or handsaw to cut the larger roots. As you continue digging, you may find smaller roots that can be cut with clippers or loppers.
  3. Once you’ve cut all of the roots around the stump, lift and remove the stump from the ground.
  4. Fill the hole with dirt and cover it with topsoil or mulch.

Note: This process can take multiple hours of labor, depending on the size of the tree stump and the root structure.

Free Quote: Get your free quote on professional stump removal today

Grinding the Tree Stump

This is the quickest method for killing and removing tree stumps. It involves hiring a tree removal specialist or renting a stump grinder machine to break apart the wood in the trunk and tree roots. Typical prices for this job are around $100–$400. Stump grinder machine rental costs typically fall between $80 and $150 for a four-hour window.

To grind a tree stump, start by trimming the stump with a chainsaw, digging around it and removing any rocks. Then, use the machine’s cutter blade to chip away at the wood and cut any roots that are connected to the stump. This process can take anywhere from two to six hours depending on the size of the stump. Once you’re finished, spread dirt in and over the hole, adding topsoil or mulch if desired.

What To Avoid When Killing Tree Stumps

Here are a few factors to consider when removing or killing tree stumps to ensure safety and effectiveness:

  • Bleach—Bleach can be used to kill a stump when poured over it in high quantities, but we recommend avoiding this method since it can be detrimental to the surrounding plants. It would be much healthier for the environment of your yard to use a more natural method like Epsom salt, as this can be beneficial to plants and soil.
  • Diesel fuel—Avoid using diesel fuel or gasoline to burn tree trunks, since these solutions don’t offer a slow, effective burn needed to properly break down the wood. Diesel fuel and gasoline can also be toxic for the surrounding plants in your yard. Instead, we suggest using minimal amounts of kerosene and kindling wood for your stump fires.
  • Potential dangers—Even if your city allows for burning a stump, monitor and maintain the fire until it’s finished burning to keep it from spreading beyond the controlled area. You should also take safety precautions when using tree removal equipment, such as a chainsaw or stump grinder, and wear the proper protective gear.
  • Proximity to other plants—If your stump is located near plants that you wish to protect, be careful when adding chemicals to the stump and keep them off any surrounding plants. For example, even though the magnesium sulfate in Epsom salt can be good for plants, too much of it can dry them out.

The Bottom Line

If you’re trying to remove a tree stump from your yard, try one of the above methods. While we recommend the DIY techniques if you’re not in a hurry, renting a machine or hiring a professional to help grind the stump is the fastest solution.

Free Quote: Get your free quote on professional stump removal today

Enter your ZIP code into the tool below to find tree removal experts in your area that can help you get rid of your pesky stump.

Frequently Asked Questions

To share feedback or ask a question about this article, send a note to our Reviews team at [email protected].

How to kill tree roots: ways to remove them from your plot

(Image credit: EyeEm/Alamy Stock Photo)

Gardening Etc Newsletter

The Home Of Outdoor Living

Thank you for signing up to . You will receive a verification email shortly.

There was a problem. Please refresh the page and try again.

By submitting your information you agree to the Terms & Conditions and Privacy Policy and are aged 16 or over.

There may come a time when you need to know how to kill tree roots. This could be for a few different reasons. Perhaps, for instance, you want to try out some new landscaping plans in your plot. A network of tree roots in the ground can be problematic, making planting difficult, or causing paving or foundations to crack. So, whether you're installing a new flower bed, patio, or shed – you may wish to clear the ground before you get building, while keeping the actual tree alive.

Or, maybe you've recently learned how to kill a tree stump, and the remaining roots are still sending up shoots around your garden, which can be a nuisance. Either way, this guide explains how to do both.

Cutting back roots should be done with care to avoid damaging the tree

(Image credit: Clive Collie/Alamy Stock Photo)

How to kill tree roots without harming the tree

Even the best trees for small gardens can be problematic when designing new backyard features. But there are ways to remove unwanted roots while keeping your deciduous or evergreen trees healthy.

Expert arborist Ned Cromack explains how they can be controlled via root pruning. This can be done by digging to expose the offending root and then cutting it using a clean and sharp hand saw. Pull out the section of cut root, fill in the hole, water well, and then mulch the area above.

However, great care must be taken, and ideally a trained professional hired for the job: 'roots are more important than branches,' he says, and it's easy to accidentally kill a tree without the proper expertise.  

For instance, the RHS explains how cutting large roots close to the tree can do unrepairable damage or destabilize it. Cutting away too much at one time can also cause harm (it's recommended to never cut more than 25% of the root structure in one go, in fact, the smaller amount removed the better) – so you may need to carry out the process over a few years to avoid shocking the tree. Root pruning should also be done at the optimum time of year, which is between winter and early spring, before bud break. This will reduce the chance of the tree becoming dehydrated.

Once offending roots are cut away, root barriers can be installed to prevent the roots from growing back, Ned says. This is where the ground is excavated, and a steel sheet is installed that the roots cannot penetrate.

If you're trying to kill unwanted suckers in your plot – shoots sent up from the root system away from the parent tree – you can carefully apply glyphosate. But, be sure to isolate them from the tree first by severing the root. Be careful not to get glyphosate on any nearby plants too, as it is non-selective.

You can remove sections of roots manually

(Image credit: Elizabeth Whiting & Associates/Alamy Stock Photo)

How to kill leftover tree roots after removing a tree

Sometimes, trees need to be cut down. But even if you've followed the steps on how to remove a tree stump, you'll still be left with a network of roots. These can make planting in the area tricky. And, in some species, they can remain alive for some time and send up new suckers around your plot, which can be a pain.

Attempting to dig out the entire root system is possible, but it's arduous work. The network of fibrous growth will be anchored to the ground, and as Ned says, you could easily spend days with a pickax to get the whole lot up. A quicker solution is to hire a pro with a stump grinder – a machine that may have been used to remove the stump itself – to destroy the major roots. The smaller roots will then rot down quicker and be much easier to remove by hand.

However, the above method may leave your plot in a bit of a mess. This is often undesirable, particularly if it means digging up areas of otherwise pristine lawns. Instead, you can use stump and root herbicides for the job – which will usually contain glyphosate. If you're leaving the stump to rot down, you can apply the herbicide to the freshly cut surface where it will slowly penetrate down to the roots. You can also apply it to freshly cut stems of the suckers to discourage further growth. 

Patience and persistence are required for this method, though. It's also important to note that glyphosate is very toxic and should be used with extreme caution, especially around pets or children. Always follow packet instructions and avoid it completely if you're looking to create a wildlife garden.

Machinery can be used to remove major roots

(Image credit: Valdis Muiznieks/Alamy Stock Photo)

How to kill tree roots in sewer pipes

Sometimes, tree roots can work their way into drains through small cracks in sewer pipework. This can result in slow drainage, gurgling noises, and bad odors, amongst other problems.

Common DIY approaches are flushing copper sulfate – a natural herbicide – down the toilet, although this isn't suitable for septic tanks. Alternatively, you can try flushing rock salt. Both, however, are seen as temporary solutions.

For a more long-lasting approach, you'll need to call in a pro who may use tools such as a mechanical auger or hydro-jet to destroy the intrusive roots. They will then be able to repair or replace the pipe to prevent the problem from happening again.

Roots growing in pipework can be problematic

(Image credit: PlazacCameraman/iStock/Getty Images Plus/Getty Images)

The garden was always a big part of Holly's life growing up, as was the surrounding New Forest where she lived. Her appreciation for the great outdoors has only grown since then. She's been an allotment keeper, a professional gardener, and a botanical illustrator – plants are her passion.

How to get rid of stumps and tree roots on the site: 4 ways

Sooner or later, every owner of the site is faced with the problem of removing stumps. Even if they didn’t exist initially, they will definitely appear over time. Aging and diseases of fruit trees, the need for redevelopment of the territory - there can be a lot of reasons. We will analyze several working methods on how to remove a stump from the site quickly and easily.

All about uprooting stumps yourself

Is it always necessary
4 working methods
— Manual uprooting
— Burnout
— Chemical destruction
— Mulching

The easiest way to solve the problem of removing large and small stumps is during the development of the site. If the territory has not yet been ennobled, special equipment is ordered. With its help, in just a few hours, they clean the site. The disadvantage of this method is obvious: heavy machinery and destructive mechanical uprooting will leave numerous marks on the site. But if the territory is still going to be ennobled, it's not scary.

It is much more difficult to choose the right solution, how to get rid of a stump in an already developed area. There can be a lot of options, but each of them has certain disadvantages. First of all, you need to understand whether it is really necessary to get rid of a piece of wood. After all, you can benefit from them. For example, an interesting landscape decor is obtained from the rest of the trunk. In order to make it, the core is hollowed out and a fertile substrate is poured into the cavity. The resulting "bed" is used to grow flowers, vegetables or berries. Such a flower bed or garden bed can become the center of an interesting multi-tiered composition. A good option is growing mushrooms. Their spores are inhabited by the remains of wood, where mushroom families germinate very quickly.

It turns out an unusual and useful “decoration”. Honey mushrooms or oyster mushrooms will give several harvests over the summer. At the same time, the mycelium actively destroys wood, because it needs food for growth. In five to six years, mushrooms will completely destroy the remains of the tree. Flowers or vegetables "work" in a similar way, however, they need much more time to destroy.


  • Landscape

    Making flower beds in the garden with your own hands: useful tips and photos that you will love

If the stump stands where it is planned to set up a flower garden or beds, or somehow interferes with the improvement, you have to think about how to uproot the stump on the site. You can invite specialists with a cutter. A powerful technique will crush the wood, deepening 20-30 cm. This is enough to get rid of the roots. Unfortunately, it is not always possible to use the services of specialists. Then use the methods available for independent use.

1. Manual uprooting

In order not to mess with the remains of the tree, when sawing, you can cut the trunk at ground level. This is done if they do not interfere and it is possible to leave them to rot in the soil. To speed up the process, the cut is chopped with an ax. Sooner or later, the rhizomes will rot, but this will not happen very soon. All the time, while the processes of overheating are going on, it will not be possible to break a garden bed, put up any building, etc. at this place.

When there is no time to wait, choose manual uprooting. This is a very labor intensive method. To begin with, they dig a hole around the hemp, exposing the rhizome. It is important to expose all root processes in the trunk area. You can not remove the soil with a shovel, but wash it off. To do this, put a drain chute in the pit and “wash” the rhizome with a stream of water under strong pressure. The bare root shoots are cut. This must be done very carefully so as not to get hurt. It is extremely inconvenient to work in the pit, the roots are most often mixed up and very hard. But it is imperative to cut them, otherwise, when the hemp is pulled out, the long rhizome will easily destroy the adjacent path, fence or building foundation. A snag with chopped roots is fixed to a winch or any other lifting mechanism and pulled out of the ground. If it is not possible to use mechanical devices, the stump is split, loosened and untwisted fragments, removed from the ground.

Instagram vash_sadovnik__

Instagram vash_sadovnik__

Uprooting takes a lot of time and effort, so not everyone is ready to do it. There are ways to remove the stump without uprooting. They are much easier. Let's analyze the most effective of them.

  • Summer cottage

    Gooseberry pruning in spring: rules and terms for the procedure


Use of fire

A very simple but rather dangerous method. It can be used with certain restrictions. First of all, the remains of the tree must be removed from buildings, fences, underground and air communications, power lines. It is impossible to carry out the procedure on peat soils (peat bogs ignite quickly and can smolder for a long time). Putting out an underground fire is very difficult, almost impossible.

Burning is carried out in calm, dry weather. All flammable items are removed to a safe distance and be sure to prepare a supply of water in case the situation gets out of hand. Start by drilling two channels inside the hemp. Drill to the maximum possible depth. One is lowered strictly vertically, and the second is placed at an angle to it. In the first there will be a fire, through the second it will receive the air necessary for combustion. In large snags, it is advisable to drill several holes for air. This will speed up the burning.


A flammable liquid is poured into the central cavity. It is best to take lighter fluid or diesel fuel. Gasoline will burn very quickly, which will not give the desired effect. A cotton wick is lowered inside the hole and lit. The only thing left to do is keep the fire going. Depending on the condition of the wood, it will last from 13 to 16 hours.

You can speed up the process if you remove the stump using the Tsiolkovsky method. In this case, "caramel fuel" is used as fuel. This is a mixture of ammonium nitrate and sugar in a ratio of 7:3. The ingredients are mixed and carefully poured into the drilled hole. You need to know that the mixture gives a very strong flame. In a matter of minutes, the entire snag, including the roots, burns out. Therefore, it is imperative to observe precautionary measures: it is necessary to ignite the fuel from a certain distance; for this, a gasoline “path” is laid to it.

  • Summer cottage

    8 ideas for environmentally friendly garbage disposal in the country


Chemical destruction

The essence of the method is the decomposition of root residues with the help of chemicals. This is an effective, but slow way to get rid of tree roots. Different preparations are used for destruction, but the method of their application is approximately the same. To begin with, as many deep holes as possible are drilled in the saw cut. This is best done in the fall, two to four weeks before the first frost. The chemical substance will have time to penetrate into the most remote root shoots before the cold weather and will destroy them all winter.

Chemical reagent is poured into the holes. Most often it is carbamide, aka urea. This is a well-known fertilizer that decomposes wood in large quantities. The granules are tightly packed in the cavity, spilled with water, covered with plastic cut and the film is securely fixed. You can plug filled holes with corks or cover with clay. After a few months, the snag will soften, it will be easier to remove it from the ground. Urea, even in large quantities, is relatively safe for the site.

The same cannot be said about potassium or sodium nitrate. They are also used to destroy wood residues. Nitrogen salts are toxic in high doses, so the technique is not suitable for areas where there are new plantings near tree residues. Saltpeters act differently than urea. They dry up the root, which is then easily taken out of the ground. If the soil is not peaty, you can simply burn it, because it is saturated with a substance that stimulates combustion. To destroy a hemp with a diameter of 15-16 cm, it is necessary to lay 2,000 g of any reagent.

Salt will help solve the problem of how to remove stumps from freshly cut trees. Tree juices will quickly spread it throughout the rhizome, which the salt will “dry out” in a year and a half. The removal procedure is the same as described above. You need to know that a high concentration of salt will not allow plants to develop in this place for several years.

Copper or iron sulphate can also be used as a chemical reagent. Each of these preparations is a highly effective insecticide and fungicide, toxic in large doses. Vitriol is used for chemical uprooting of diseased stumps. No other way can prevent the infection of nearby plantings.

Herbicides work quickly and effectively. They process only a fresh cut, pour the roots with a solution. Autumn processing allows you to remove the rhizomes from the ground in the spring without any problems. But the soil turns out to be contaminated with herbicides, nothing will grow here for several years.


  • Summer cottage

    Cherry pruning: all the rules that a gardener needs to know

4. Mulching

The essence of the technique is that the mulch layer blocks the access of air to the saw cut. Without oxygen, the roots slowly die. True, it takes a lot of time. Mulching is more suitable for destroying small stumps. For example, it will be a good solution for getting rid of cherry or plum roots.

The trunk is cut at ground level or slightly above. The saw cut is covered with a dense layer of mulch 20-25 cm high. It is desirable to cover the entire near-trunk circle. Any organic matter is suitable as mulch: chopped grass, leaves, plant debris. The rhizomes will rot for a long time, for several years. All this time, organic matter will have to be added, as its layer is thinning.


  • Landscape

    7 reasons to mulch your garden (if you still don't)

There are many ways to uproot trees. The optimal one is chosen taking into account the prevailing conditions. So, effective mechanical uprooting is not suitable for an already ennobled area, but on a newly developed area it will help to get rid of rhizomes quickly and easily. In order not to spoil the landscape design, they invite specialists with a cutter, they can remove any stumps in a short time. Or use the safest chemical uprooting. Burning is effective, but it must be done very carefully. The risk of fire and fire is too great.

Prepared by

Inna Yasinovskaya

Destruction of the roots of trees and bushes: the best means and methods

Renovation of the garden is invariably accompanied by cutting down old trees and planting new ones. But after that, one problem appears: stumps remain in place of the removed plants, which not only spoil the appearance of the garden, but also reduce the potential area for new plantings.

This article will describe the main ways to destroy the roots and stumps of trees, and step-by-step instructions for mechanical and chemical removal of wood residues will help clear the garden of old stumps.


  1. What is the purpose of removing tree roots
  2. Preparation for destruction of tree roots
  3. Methods for removing tree roots
    1. Mechanical uprooting
    2. Chemical removal of tree roots
  4. How to remove roots yourself
    1. Safety when removing roots and stumps

Why you need to remove tree roots

Removing an old stump has not only aesthetic but also practical value. As a rule, they appear on the site after the old tree has already been cut down and disposed of. Just removing a tree from the site is easy, while removing its overgrown roots and large stump is much more difficult. Many people use the old proven mechanical uprooting, but there are a variety of chemicals on the modern horticultural market that make this process much easier.

See also: Do-it-yourself drip irrigation

If the root and part of the trunk do not bother you, you can turn it into a kind of garden decoration by planting flowers inside it or decorating it in any other way you like. However, there are times when destruction is not just a whim, but a necessity. This happens if the tree was cut down due to illness. If even a small part of it is left in the ground, it can become a source of infection for the rest of the trees in the garden. In addition, the remains of an old plant occupy a usable area, because in their place you can plant a young tree or shrub, which will bring a crop in the future.

Preparing to destroy the roots of trees

Before you start removing the roots, you should decide on the method you will use for this. Wood residues can be destroyed mechanically or chemically.

If you prefer to manually uproot part of the trunk, you will need a saw, a shovel and an axe. In this case, you will first have to dig a hole around the stump, chop or file its roots and gradually, piece by piece, remove the wood from the soil.

Note: The mechanical method is considered obsolete not only because of the high labor costs, but also because some large specimens are difficult to manually remove, and the remains can only be uprooted from the soil with the help of machinery.

The chemical method is considered more modern. The remains of wood are simply treated with a special preparation that accelerates the process of fiber destruction. As a result, in a short time, the remains of the trunk begin to crumble, and you just have to remove it.

Figure 1. Preparatory work

Depending on the chosen method, you will need some preparation (Figure 1). With mechanical removal, you need to dig a hole around the trunk in advance and prepare all the necessary tools, and in some cases, rent special equipment. If you opted for the chemical method, you will need to buy special treatment products, as well as prepare a spray gun and protective clothing.

Methods for removing tree roots

As mentioned above, roots and stumps can be destroyed mechanically and chemically. Since they are fundamentally different from each other, we will look at the features, advantages and disadvantages of each of them in more detail so that you can choose the right one for yourself.

Mechanical uprooting

This method is considered the oldest, since the process uses tools with which the roots are filed, and the stump is simply uprooted from the ground. A more modern mechanical method involves the involvement of heavy equipment (excavators, bulldozers or special pullers), but, unfortunately, not everyone can pay for the rental of such equipment. In addition, it is far from always possible for heavy equipment to enter the site.

Figure 2. Mechanical uprooting

If you don't want or can't use heavy equipment, you can also remove the stump manually. This will require some preparation. First, the remains of the plant must be freed from the surrounding earth by digging the soil with a shovel. Secondly, you need to prepare in advance the equipment with which the trunk will be removed from the ground (Figure 2).

Mechanical uprooting is carried out as follows:

  1. After the stump is freed from the soil, it must be tied with a cable attached to the winch. It is better to fasten the cable immediately under the saw cut so that it acts as a lever when tipping over. The winch can be tied to a regular car.
  2. If it is not possible to use a winch, the frame can be removed by cutting off the remains of the roots with an ax or cutting down with a saw.
  3. Once the trunk is free of lateral roots, it can be easily swung and removed.

This method is the cheapest, and with some effort, a large root can be uprooted in a day. However, this method is accompanied by significant labor costs. In addition, if you plan to carry out construction on this site, a mechanical removal method will not work for you, as the remnants of the roots may remain in the ground.

Chemical removal of tree roots

Chemical stump removal is simpler and more modern, although it also has certain features. As a rule, saltpeter is used to destroy wood residues - a chemical with a powerful oxidizing effect, which quickly destroys not only the aerial part, but also the roots (Figure 3).

Removal of roots with saltpeter is carried out as follows:

  1. At the end of summer or beginning of autumn, several holes are drilled in the trunk. For this purpose, it is better to use the thickest drills so that the diameter of the holes is large.
  2. Potassium or sodium nitrate is poured into the holes obtained and poured with plenty of water. The liquid will dissolve the chemical and it will penetrate the wood fibers faster.
  3. The top of the trunk should be covered with pieces of wood or covered with a film, tightly tied to the trunk. This will prevent chemical vapors from escaping, and the destruction process will be more active.

Leave the stump prepared in this way until next summer. During this time, saltpeter will saturate not only the trunk, but also the roots. After that, you need to either pour a small amount of kerosene on the remains of the tree, or light a fire around the stump. The tree will begin to smolder, and all you have to do is remove its remains and dig up the site.

Note: It is important to consider that this method is not suitable for areas with peaty soil, since the roots soaked with saltpeter after ignition can cause a fire in the deep layers of the soil.

This method is good because it requires minimal physical effort, and all the remains of the tree will be completely removed. An exception can only be thick and deep-lying roots, but they will be destroyed so much that they will not be able to give young shoots.

Figure 3. Chemical destruction with saltpeter

But when using saltpeter, it should be borne in mind that in large quantities it negatively affects the fertility of the soil, so it will not be possible to grow fruit and vegetable crops in this area for several years.

How to remove roots with your own hands

Another easy way to remove roots and stumps with your own hands is with the use of urea. This method is also considered chemical, but its advantage is that even large stumps can be removed quickly and with minimal labor.

Preparation of the barrel for removal is similar to the saltpeter method: large holes are drilled in the barrel, into which urea (urea) is poured. Each hole is filled with water, and the saw cut is tightly covered with a film. After 1-2 years, both the trunk and the roots remaining in the soil will completely rot and turn into fertile soil (Figure 4).

Figure 4. Chemical uprooting with urea

The main advantage of this method is considered to be low labor costs. But it should also be borne in mind that when using urea to remove stumps, all wood is destroyed: not only the trunk, but also the roots that go deep into the soil. In addition, after such treatment, the soil is not polluted with chemicals, remains fertile and suitable for growing other crops. Of the shortcomings, only a long period of stump removal can be distinguished: it can take 1-2 years to destroy large specimens, but if you want to maintain high soil quality and not make serious physical effort, this method will be the most suitable.

Learn more