How to string christmas lights on outside tree

How to Install Lights on an Outdoor Tree

Excited to turn your yard into a winter wonderland this year, but don’t know where to start? We all enjoy hanging stockings around the house and decorating the Christmas tree in our living rooms. But the fun doesn’t have to stop inside the home! Get your holiday light show started with this guide to safely hanging Christmas lights on your outdoor trees.

What You Need to Hang Christmas Lights on an Outdoor Tree

Here’s what you’ll need to get started:

• String lights
• Extension cords
• Measuring tape or yardstick
• Sharpie-type pen
Choose the Tree You’ll Hang Lights On

Before measuring out your lights, decide which tree you’ll hang your lights on. In general, trees with more textured bark will hold the lights most easily.

You also want to choose a tree that 1) your extension cords will reach, and that 2) will be visible to passersby. Note which side of the tree faces the road so you can arrange the display such that the less-sightly ends of cords hang on the back of the tree.

Hanging Lights on Trees with Exposed Trunks

Trees like oaks, maples and beeches won’t have leaves left during the winter, so your lights will be more visible. Once you decide on a bulb size (mini, C7 or C8), you’ll need to measure the string lights you want to hang on your outdoor tree. This is a good time to test the lights to make sure all the bulbs work!

Measure the height of the tree with your yardstick or measuring tape. Then measure the circumference of the trunk. Don’t forget a separate set of measurements for any branches you’d like to decorate as well.

The easy rule of thumb is (height / separation) x circumference. For example, if we were hanging lights three inches apart on a four-foot-high trunk with a two-foot circumference, our measurements would be (4’ / 3”) x 2’ = 16 x 2 = 32’ of lighting. Perform the same calculations for each branch you’d like to include.

Note: To complete the calculation, make sure to convert any measurements that are in feet to inches for an all-inches result, and then divide that result by 12 for the number of feet you need in lights. Like so: 48 inches (4' truck height) / 3 inches (separation) = 16 inches x 24 inches (2' tree circumference) = 384 inches, which converts to 32-feet of lighting.

Hanging Lights on Evergreen Trees

Evergreen trees will still have greenery during the winter and will require longer light strings with bigger bulbs. Mr. Handyman recommends 6-inch bulb spacing. Consider hanging larger bulbs such as C7s or C8s on evergreen trees.

Hanging Lights on Large Outdoor Trees

Decorating a large outdoor tree will require a little extra planning.

• Decorate outside branches, as inside branches may not be as visible.
• Set up more than one ladder in case one falls.
• Ask a friend or family member to steady the ladder you’re on.

Hanging Lights on Your Outside Tree

Once you’ve chosen your tree and measured out your lights, it’s time to start hanging lights on your outside tree! There’s no need to use damaging nails or staples here – the bark should hold the strands just fine. You can use zip ties for areas that need extra security.

Directions:

1. Set up your ladder. Always make sure you can climb down easily.
2. Mark your tree. Using the yardstick or measuring tape and your Sharpie, make a mark about every three inches up the length of the trunk. You’ll use this as a guide when you’re hanging your lights.
3. Attach your power source. Run the extension cord from your house to the tree. Wrap the cord around the base of the tree a couple times and tie it in a simple knot so that there’s no risk of unplugging if anything disturbs the cord. Start about one-inch up to keep your wires out of water or snowdrifts.
4. Start wrapping the light strand. Wrap your lights firmly enough to stay on the tree bark, but not as tightly as possible – if your tree swells after a heavy rain, it will need room to expand without damaging your lights.
5. Plan spacing for branches. If you would like to wrap multiple branches with the same string of lights, space your wraps twice as far apart going up so that you can wrap in the middle as you descend.
6. Secure the end of your light strand with a simple knot or twist tie.
7. Plug your lights in and admire!

Don’t be afraid to get creative with your outside tree lights! You can create beautiful multicolored trees by using several light strands in different colors. To avoid mixing up your colors, color-code the strands by attaching a piece of colored tape.

Christmas Light Hanging Services

All Tangled Up? No need to add to your holiday stress! Mr. Handyman’s holiday light hanging services can do all the work for you. Contact your local Mr. Handyman at (877) 685-1377 or request service online.

Make sure your home is safe and sound this holiday season with an electrical safety inspection from Mr. Electric®. Like Mr. Handyman, Mr. Electric is part of the Neighborly® community of trusted home service providers. You can count on Mr. Electric for all your electrical repairs, installations and upgrades.

Categories:

• DIY
• Holiday & Seasonal
• Outdoor Living

Wrap Lights on an Outdoor Tree in 6 Easy Steps ⋆ Love Our Real Life

Lights on outdoor trees give a warm and cozy feeling! Whether it's for outdoor Christmas decorations or simply to give an outdoor space better ambience.

Check out my 6 easy steps to wrap lights on an outdoor tree to decorate for Christmas or to dress up an outdoor patio!

Get more ideas for improving outdoor spaces here.

Outdoor tree lighting can add a beautiful focal point to your backyard. If your landscape lights are minimal, wrapping trunks of outdoor trees (as well as branches of the trees) with fairy lights is a fun and inexpensive way to illuminate your yard and outdoor space.

The warm glow of lights on trees doesn't have to be reserved for Christmas! This is a great way to spotlight a beautiful tree in your backyard for summer enjoyment too.

Get Exclusive Tips to Create a Home You Deserve

First Name Email Address

By subscribing, I consent to receiving emails.

We have a neighbor that beautifully wraps several trees in her yard each year for Christmas. When I say she wraps lights on her trees, I mean she carefully wraps the trunk and most of the branches for an amazing show!

I've intended to do the same for many years without success as I was no fool to how much work would be involved. However, this year I actually did it.

Well, kind of. I wrapped one small tree. BUT, I love it.

The key to this process is patience. Having just completed this little project myself, I do have some insight you might benefit from. I will not claim to be an expert, but I do have some tips you can use.

This post contains affiliate links. Please see my full disclosure policy for details.

MATERIALS NEEDED:
• Clear indoor /outdoor heavy duty lights
• Zip Ties (optional)
• Outdoor Extension cord (optional)
• a healthy dose of patience

Kind of kidding about requiring patience, kind of not!

This little tree took me around 2 ½ hours to wrap. Keep in mind this was my first time doing anything more than just throwing lights up and calling it a day.

I typically love to live my life by the "good enough" motto, but I really wanted to make an exception with this little tree.

6 EASY STEPS TO WRAP LIGHTS ON AN OUTDOOR TREE:

1.

Determine the tree(s) you want to have lights.

This particular project is not the same as putting lights on your Christmas tree as I selected a tree that as I selected a tree that would allow you to appreciate the shape of the tree branches.

We have this small, multi-stem trunked maple tree that I really wanted to use. My husband refers to it as our weed, because it is typically growing wildly unruly.

But, it is close to an outdoor electric outlet, small, and I like the general shape of the tree. It was the winner!

Tips for selecting a tree:

• If lights will be left on year round, avoid selecting a tree that is not mature.
• Be aware of how the base of the tree will appear once highlighted with lights.
• Is the tree convenient to a power source?
• Will you want lights to reach the top of the tree or just a portion of the way up? Larger trees require a LOT more lights plus can present a challenge when wrapping.
• Do you like the symmetry of the tree? Lights will highlight the shape of the tree, so be sure you appreciate how it will look once illuminated in your landscape design.
• Think about the types of trees, evergreens vs. deciduous? Deciduous trees will not have leaves during winter and will look much different with lights when they get their leaves in the spring.

My golden doodle, Bentley photobombed the above picture! He loves a good project.

2. Determine how many lights you will need.

I found two 400-light strands on clearance after Christmas last year. It required ALL of the lights (800) for my small tree.

My plan was to just wrap as much as I could.

The strand you get will let you know how many you can safely connect together.

The best outdoor lights to use for your trees, especially if you intend to leave up year-round are LED lights. These are more energy-efficient and can better withstand the outdoor elements.

Many of the outdoor LED lights are solar powered. They do have a battery pack as well.

PRO TIP: A quick tip is to pick a reasonably warm day. I was lucky enough to find a day that my hands didn't get cold and no gloves would be needed. That would not have feen fun!

As I'm typing this post, we have at least a couple inches of snow on the ground. Brrrr!

3. Start wrapping from the bottom of the tree.

With the first strand of lights, ensure you have the male end (male plug) of the light strand accessible to plug into an outlet/power source.

My outlet is not super close, so I needed to use an outdoor extension cord to reach.

MORE TIPS

• Smaller strands will be easier to manage! My 400 strand of lights was really challenging to get through small branches/spaces on our little tree.
• It would be best to start with your lights wrapped in a ball shape to help you navigate around the tree trunk and branches more easily.
• Having a helper will make the process faster.

4. Go around the Circumference of the tree trunk / branches systematically, wrapping tightly.

I did not feel the need to use any zip ties, but you could certainly do so if you felt there were areas the lights weren't as secure as you'd like.

The closer you space the lights, the more dramatic the end result will be! However, keep in mind this will mean using more lights!

If you will need to go back down a branch to connect with another, you will be able to space the lights further apart.

Also, try to pick limbs that you would consider the stronger branches so they can handle the weight of the mini lights.

Keep in mind, you do not need to go all the way to the top of each branch!

I would suggest finding a reasonable height to stop with your lights and stay consistent with each branch. You will have a much more uniform look in the end.

5. Check your lights

Every little bit throughout the process, I plugged in my lights to get a better perspective of how it would look. This allowed me to make a few adjustments along the way.

You could also just leave the lights while you wrap them to give you a good idea of how they look.

It was starting to get darker when I was wrapping my tree and this helped me see exactly how the string lights were looking!

6.

I love my sweet neighbor and love that she inspired me to try this myself. With a few tweaks, I think I can shave some serious time off when I do it again next year.

That's right. I said next year.

I'm a sucker for lights and I will definitely find time to do this again next season.

Did you see my post giving tips how to hang outdoor string lights? This post gives great tips for hanging hanging string lights on a deck, pergola, gazebo, fence, etc!

We love them and use them every chance we get. Lights add so much ambiance for outdoor dining or just hanging out on the patio without a big price tag. As does fire!

You also can see our fire pit in the below image. Here are some tips if you are searching for the perfect fire pit or fire bowl for your outdoor space.

Get the full deck and patio before and after makeover. It's crazy what a change this project has made for how we use our home.

I'm on the lookout for a tree in my backyard that I can leave lights on year-round, too! I feel a bit like a tween with my string light obsession;-)

But, I bet you'll love them too!

Thanks for stopping by Love Our Real Life today. I hope I've inspired you to add a little light to your life (pun intended!). Now, go wrap lights on an outdoor tree at your home!

Have a great week!

Be sure to save this post to Pinterest or share on FaceBook so you can find it later!

How beautiful it is to hang a garland on a window, wall, Christmas tree: tips and tricks

December is coming, and the New Year is coming. To feel that very festive mood, when worries fade into the background and only the expectation of a miracle remains, you need to properly decorate the apartment. The easiest way: hang a garland on a Christmas tree, window or wall. It would seem that it could be easier? But here, too, there are tricks. Let's talk about them.

Oksana Barabanova

Tags:

Accessories

Decorations

New Year holidays

Christmas trees

New Year decoration

How to hang a garland at home to create a New Year's mood

The right entourage is the key to a fun holiday and a pleasant long weekend spent with your family, so it is so necessary to think over New Year's decorations. Our today's material will tell you how to hang garlands beautifully so that they harmoniously fit into the interior.

How to hang a garland

Garlands are one of the most popular Christmas decorations. Their design is incredibly diverse. To make the right choice, let's orient ourselves in the range of stores. So, garlands are of the following types:

• Garland-thread - the simplest type of garlands that is used in most homes, great for decorating Christmas trees, furniture and walls;
• Mesh garland - is a "honeycomb" of wires with light bulbs. They are convenient to decorate walls, windows and ceilings.
• Fringe garland - light bulbs connected in bundles, can be LED. The fringe garland looks great in the design of windows and walls.
• Duralight is a transparent wire with lights inside, thanks to the flexibility of the cord, you can create a huge number of different patterns and inscriptions, as well as beautifully outline the contours of objects, such as mirrors or paintings, with a garland.

You have chosen the decoration you like, and now the question arises: how to use it in the interior? How can you hang a garland so that the New Year's decor is thoughtful, not messy? Read more about this.

How can I fix the garland?

It depends on the surface on which you are going to hang the garland.

• Adhesive tape is suitable for smooth surfaces, for example, for plastic window slopes. At the same time, it can leave a sticky mark on the glass itself, which will have to be washed off. You should not hang a garland on a wall with wallpaper using adhesive tape, because their top layer will peel off along with it. It is better to use double-sided foam tape.
• Thumbtacks or pins suitable for wallpaper or fabric surface. Holes from them will be invisible.
• Vacuum suction hooks are handy for glass as they won't leave marks. It is necessary to choose small hooks so that they do not catch the eye.
• Wire Clip Hooks are the perfect solution for securing because they will hold tight, be invisible and leave no marks.

In general, before hanging a garland, decide what exactly you are going to decorate and take the necessary fasteners for the surface. We will tell you more about them later.

How to hang a garland on a window beautifully

To carefully fix a garland on a window, you will need strong tape, hooks with suction cups, or special clips that are sold in hardware stores.

The easiest way is to glue a simple thread garland around the perimeter of the window. However, if such a decor seems not impressive enough to you, we suggest making a curtain from a mesh garland. For greater mystery, it can be covered with transparent tulle.

How to hang a garland on the window to stand out from the neighbors? The original solution is to place a duralight garland directly on the glass, creating some kind of inscription or drawing.

How beautiful it is to hang a garland on the wall

Ordinary adhesive tape is not suitable for attaching a garland to a wall. It will damage the wallpaper and leave sticky marks on the painted wall. Better buy double-sided foam tape. You can hang a garland on the wallpaper using stationery pins. Special clips for attaching garlands are also great.

A linear garland can be used to create a unique decoration on the wall. Traditional New Year motifs are popular: Christmas trees, deer, snowmen. Here are some ideas on how to beautifully hang a garland on the wall.

How to hang a Christmas tree garland on the wall

This pattern is not difficult, but it looks cute and very New Year's. Place the mounts on the wall in a zigzag pattern and hang a garland, and then decorate the makeshift Christmas tree with toys.

How to hang a garland on the wall in the form of an inscription

A duralight garland is best suited for this purpose. Put on the wall any inscriptions related to the holiday or motivating you and your family. We present a few ideas in the photo. Here you have to work a little and “play with fonts”, but it’s better to come up with and sketch the inscription in advance.

How to hang a garland on the wall in other ways

For those who are not looking for easy ways, we offer to come up with real pictures from garlands. Use additional decor: paper snowflakes, photographs, confetti, sparkles. Photo cards can be easily attached to the garland by placing it horizontally. So you will decorate the room and refresh warm memories in your memory. Of course, it is more convenient to look at the pictures if the garland is hanging on the wall.

You can use some decorative clothespins or even the most ordinary ones to attach photos. The latter can be painted and pasted over with beautiful paper. Or hang photos on paper clips by connecting two pieces for convenience. This decor looks very nice and cozy.

How to hang a garland in a room

To decorate a room with a garland, attach it around the perimeter of a doorway or along the ceiling. A garland-curtain will also look great on the door - you will get a real portal to the New Year's fairy tale! We offer a few more original options on how to hang a garland beautifully in a room.

How to hang a garland in a room on a mirror

A luminous garland looks fantastic on the mirror frame! The lights will be reflected in the glass, creating real magic. Try wrapping a simple LED garland with tinsel, and then the effect of the decoration will become even more impressive.

How to hang a garland in a room on a table

The garland looks especially impressive under a glass top. In combination with beautiful dishes and wine glasses, you will get an original New Year's decor for a kitchen or dining room. But even this can not be stopped. Place a Christmas tree wreath on the table and wrap it with a garland.

How to hang a garland in a room on a bed

The garland can be stretched along the headboard. Then you will literally fall asleep and wake up with a feeling of a New Year's miracle! If you have a bed with legs, wrap a garland around them too.

How to hang a garland-curtain on a window

A garland in the form of a canvas deserves special attention, which is simply created to decorate windows. If your garland-curtain is light in weight, you can secure it with double-sided tape. For heavier jewelry, a glue gun is suitable. It will help to hang the product both on the frame and on the glass. Tulle hooks will also be a great help.

Before you hang an electric garland-curtain on the window, consider whether the length of the wire reaches the outlet or you need to use an extension cord. In general, a garland on batteries will allow you not to think about it.

How to hang a garland on a Christmas tree

The garland will perfectly complement the Christmas decoration of the Christmas tree. To prevent the decoration from slipping, use special clothespins. Fix them on the branches where you want to hang the garland.

The garland does not have to match the toys. You can also choose a contrasting decoration: red to blue, blue to gold, yellow to purple. And of course, garlands with multi-colored light bulbs are always relevant - there is never too much color in the New Year!

If your Christmas tree is richly decorated with toys, hang the garland as close to the trunk as possible so as not to create a clutter effect.

Thinking about how to hang a garland on a Christmas tree, most imagine the serpentine way. However, this can also be done crosswise and even stretching the garland from top to bottom.

Buy some garlands for lavish decor. Sometimes the Christmas tree looks poor if there are too few garlands. Do you want your Christmas tree to be the most beautiful and original?

How to hang a net garland

Net garland is suitable for decorating windows and doors. It creates a magical glow and transforms any interior.

The best option would be a garland-mesh parallel connection. This means that when one light burns out, the rest will continue to shine.

The easiest way to hang a mesh garland is on a curtain rod, but it can also be attached to a window frame and above a doorway. In this case, use a glue gun, since such a garland is quite heavy and the adhesive tape simply will not hold it.

How to hang a garland on a Christmas tree beautifully: indoors and outdoors, step-by-step instructions, diagrams and videos

Decorating a Christmas tree is an important moment that not only children, but also adults are waiting for. Packages with toys and tinsel are taken out, beautiful balls are hung, perhaps some decorations are even made by hand. But the Christmas tree must sparkle and shine, and this requires LED lights. How best to hang a garland on a Christmas tree is described in this article.

Decorating the Christmas tree correctly: first garland or toys?

It is much more convenient to decorate the Christmas tree in the following order:

1. First of all, lights are placed on the Christmas tree. Beforehand, it is recommended to lay out the garland on the floor and check the operation of the light bulbs, then distribute it on the tree.
2. Only after that you can hang toys on the branches: balls, bells, houses, etc. Since the bulbs are already on the tree, you can assemble a composition that matches the color. For example, hang a golden bow near the red light. When all the decorations are on the tree, you need to make sure once again that they are evenly distributed and securely fastened to the branches.
3. At the end of decoration, artificial snow can be spread on the ends of the paws, and the entire Christmas tree can be decorated with rain, beads and tinsel.

Reasons why it is better to hang an electric garland on the Christmas tree in the first place:

• Without additional decorations, the wire is easy to lead to the outlet.
• You can turn on the lights, check their work, see how beautifully they are distributed among the branches. In which case, the garland is easy to remove and reposition.
• Lights are easier to match with Christmas decorations so that they are in the right color scheme.

Do not forget about the design concept, which many are guided by in the process of preparing for the New Year holidays. If you want to achieve the effect of an inner glow on the tree, place the lights closer to the trunk, and then hang the rest of the decorations. The same applies to New Year's lighting with large bulbs - they need to be distributed on the Christmas tree in the first place. Designers prefer to hang small flashing LEDs on a Christmas tree already decorated with toys. A slight shimmer will give the Christmas tree a magical aura, and the lights will attract attention.

Hanging the lights on the Christmas tree before or after the toys - everyone decides for himself. The main thing is that the preparation for the New Year brings joy.

See also: Making garlands for the Christmas tree with your own hands

How to choose a garland?

Among the abundance of shimmering garlands presented in stores, it is difficult to make a choice. First, let's look at the main types of LED decorations:

• Filamentous. Most often, it is with such lighting equipment that the Christmas tree and the room are decorated. They can be in the form of one long cord on which LED bulbs are located. Manufacturers also produce garlands in the form of a grid or fringe - it is convenient to hang them on windows and walls.
• Street. To decorate the Christmas tree on the street, they use special transparent flexible garlands with LED bulbs, which are reliably protected from moisture.
• LED strips. They are used not only as a New Year's decoration, but also for additional lighting in the room.

Manufacturers of New Year's lighting equipment recommend purchasing an LED decoration with 500 bulbs for a two-meter Christmas tree (their number is indicated on the package). If the tree is 30-50 cm taller, it is better to choose a garland with an additional 50-100 bulbs.

Classic Christmas decorations can glow with a yellowish dim light, and light bulbs often fail. Manufacturers have come up with and introduced many innovations so that the garlands work for a long time and decorate the Christmas tree with iridescent, multi-colored lights.

But do not forget that the garland can be dangerous to health and even life:

• To avoid fire due to excessive heating of the bulbs, you should purchase a decoration with a power of no more than 65 watts.
• Do not let children turn lights on and off by themselves.
• Do not put strings with lights in glass bottles, despite the fact that such arrangements look very nice. Such decor can provoke an electric shock.

What to look for when buying LED garlands:

1. The plug must be durable, made of quality material, not change its original shape.
2. You can calculate the desired length of the decoration as follows: measure the height of the Christmas tree and buy an ornament three times longer in length.
3. The wire that will be connected to the outlet must be at least 1.5 m for a home Christmas tree, for street decor - 10 m or more.
4. Light bulbs must be tightly fixed, not wobble, much less fall out of the sockets.
5. The power supply must only be opened with a screwdriver or other special tools. It is better to look at the soldering of wires before buying a product.
6. For a street Christmas tree, purchase special lighting equipment with additional protection against moisture. On the packaging, the manufacturer must indicate that the jewelry is intended for external use.
7. Samples of good quality must be free from foreign, unpleasant odors.
8. The purchased model must be certified, otherwise it is forbidden to use it to decorate the Christmas tree and the room.

The operation of the garland should be checked in the store, and at home it is undesirable to immediately plug it into the outlet. Give time for the bulbs to warm up to room temperature, only then proceed to the decor of the Christmas tree.

How to decorate a Christmas tree with a garland?

There are several secrets on how to hang the garland so that the lights look beautiful:

1. The decoration is placed on the Christmas tree only after the tree is set upright. If the Christmas tree will stand in the corner, you need to think in advance which side of it should look more elegant.
2. Before hanging a luminous decor, lay it out on the floor, check the operation of all the bulbs, connect it to the outlet to make sure that all the lights are working.
3. It is more convenient to start hanging the decoration from above, evenly distributing the lights in a zigzag pattern over the branches. If the tree will be in the center of the room, start at the top and work your way around.
4. If you place lights near the trunk of a tree, it will look magical and mysterious, but it is better not to use flickering light bulbs for this.
5. A thin garland with monochrome lights can be wrapped around each branch, starting from the lower legs.

Is it possible to hang a garland on an artificial Christmas tree and how to do it correctly:

• Artificial tree needs additional, warmer lighting. Instead of blue or silver light bulbs, decorate the artificial Christmas tree with gold, red, purple lights.
• Any artificial Christmas tree can be decorated with a garland, but provided that the device is fully functional, there are no bare wires in it, and all bulbs are tightly held in cartridges.
• If there is not enough cord to decorate the entire height of the Christmas tree, you do not need to remove the decorations and start over. Buy another copy and complete the decor to the end.

If the Christmas tree is in the house

Interior designers offer their own way to decorate the Christmas tree with a garland:

• Enter the room and notice where your eyes first turned. It is in this place that it is better to put a shiny and sparkling Christmas tree. In addition to the tree, you can decorate windows, stair railings, fireplaces, bookshelves, etc. with lights.
• Come up with a style of New Year's decor, and only then choose decorations for it. Light bulbs are different: plain, multi-colored, with a warm yellowish tint, curly. For a classic style, it is better to choose traditional colored lights, and for a Scandinavian or eco-style, plain or white ones are suitable.
• When choosing a decoration, consider not only the length, but also the width of the Christmas tree: the more fluffy it is, the longer the garland will be needed.

See also: Creating a Christmas tree from a garland on a wall or window with your own hands

The sequence of further actions:

1. We check the health of the decoration before hanging it on the branches.
2. Preparing a few extensions in case the cord is not enough to decorate the entire Christmas tree. Most garlands are made in such a way that it is possible to attach them to each other. But according to fire safety rules, it is impossible to insert a Christmas decoration with more than 500 lights into one wire.
3. So that the decor does not get confused, it is more convenient to decorate the Christmas tree together. You can wind the cord into a ball, starting from the part opposite to the plug. So you will hold the decoration in one hand, and lay out the light bulbs on the branches with the other.
4. Light up the lights to see what colors will be on the tree. Start hanging decor by choosing a pattern: zigzag, spiral, top-down, diagonal, vertical lines, etc.

How to hang a garland on a street tree?

Tips and tricks on how to decorate a street tree on a porch or garden:

• It is better to use warm colors of lights: yellows, reds, purples.
• The plug from the garland must reach the socket. If you cannot connect the decoration to electricity, choose garlands that run on batteries.
• Buy LEDs that are waterproof. On the packaging, the manufacturer must indicate that the garland is allowed to be used outdoors.
• You can purchase ready-made sets of New Year's lighting equipment, for example, 10 luminous threads 10 m long each. With this composition, you can easily decorate a street Christmas tree 5-10 m high.

To create a festive, magical mood in a country house or in the country, they often use special illumination from luminous bulbs. Not only a decorated street Christmas tree looks beautiful, but also a luminous roof, balcony railings, columns, windows from the outside, trees and shrubs.

Diagrams

There are several ways to hang the decoration on Christmas tree branches:

1. Start from the top, evenly distributing the bulbs over the lower legs in a spiral with a little sagging.
2. To make it easier to hang toys later, lights can be attached closer to the trunk.
3. If the Christmas tree is in the center of the room, it is better to distribute the luminous decoration in a circle.
4. On the tree, which will be located in the corner of the room, the garland is hung on the branches in a zigzag pattern.
5. It is permissible to start decorating the Christmas tree from the lower branches, in tiers, as if obliquely, or from above with a serpentine.