How to take care of a redbud tree

How to Grow and Care for the Redbud Tree

A redbud tree is a reliable way to add color and structure to your landscape. As well as being an attractive ornamental plant, the redbud tree is also pleasingly easy to care for.

Native to many parts of North America, the redbud tree (Cercsis canadensis) is suitable for USDA planting zones 4 to 9. Also known as the Judas tree, this deciduous plant enjoys a lifespan of around 20 years. During early spring clusters of small buds form. These develop into showy pink or magenta blossoms which can last for up to 3 weeks before being quickly replaced by attractive, heart shaped leaves.

An elegant and easy to care for plant, the redbud tree is an eye-catching plant that is suitable for most gardens. 

A member of the legume family the plant’s pea shaped blossoms are edible. They can be used on salads to add a citrusy taste. Unopened buds can also be pickled and used in place of capers.

Ideal for woodland and natural planting schemes. The compact nature of the redbud means that it is also ideal for planting in a border or as a specimen plant. This is your complete guide to growing your own redbud tree.

Different Varieties of Redbud Tree

Many garden stores sell redbud trees. If you want a more exotic or unusual cultivar you may need to purchase online from a specialist nursery.

Rising Sun is one of the most commonly grown redbud cultivars. It reliably produces fuschia colored flowers every spring. When the foliage first emerges it is a pleasing, soft apricot shade. This slowly turns to a vivid gold shade before finally becoming bright green.

Forest pansy, one of the most popular cultivars, is prized for its pink flowers. 

Forest Pansy is another popular cultivar. Producing eye catching pea-like pink flowers and burgundy foliage, in the warmest climates the foliage lightens to a green shade.

Appalachian Red is a reliable cultivar that produces fuschia pink colored blooms.

The deciduous Covey or Lavender Twist plant is a compact, weeping variety. It is commonly grown for its large, heart shaped leaves and lavender-pink flowers. Another weeping cultivar is Ruby Falls. Ideal for small spaces, this particular variety produces masses of deep purple blooms in early spring adding drama and interest to your garden.

Royal White is grown for its white flowers, as are Alba and Texas White. Both these cultivars produce bright white flowers and bright green foliage.  

The elegant heart shaped foliage of the plant provides interest long after the flowers have faded.

A compact plant, most varieties of the redbud tree achieve a height of 20 to 30 ft and a spread of 15 to 35 ft, depending on the growing conditions.

In small gardens the dwarf variety Ace of Hearts is a great choice. Reaching no more than 12 ft in height, it naturally maintains its shape meaning that no pruning is necessary.

Finally, the hybrid Merlot is a cross between Texas White and Forest Pansy. Merlot produces glossy, dark purple foliage and magenta-pink blooms. It is also pleasingly heat and drought tolerant.

When selecting your redbud cultivar, try to select the healthiest possible plant. This makes ongoing care a lot easier.

Choosing the Ideal Site

Choose your site carefully. The redbud tree doesn’t like to be transplanted.

Once established these plants can grow up to 2 ft a year. Make sure that your chosen position has plenty of room for your redbud to grow into.

Your chosen position should be about 8 ft from any existing structures such as garages or septic tanks. This helps to prevent often costly damage caused by root disturbance. While you should plant well away from larger structures, you can plant the tree closer to fences because these don’t have a deep foundation. Aim to leave a gap of about 3 ft between your plant and any fences .

Choosing a favorable site helps to encourage this low maintenance plant even more abundantly.  

The plant also prefers a partial shade position. While the redbud tree can tolerate a lighter or full sun position, there should be some shade from the intense heat of the midday sun.

How to Plant

Redbuds can be planted during most parts of the year. However, you should avoid planting during the warmest summer months or during hard freezes.

The redbud tree does best in well draining soil. Working in organic material, such as compost, helps to improve drainage.

Before planting weed around the planting site. Aim to clear about 3 ft of soil around your chosen position.

If you don’t know your soil’s profile, this is also a good time to find out. A soil test kit is easy to use and tells you the exact makeup of your soil. While the redbud is capable of growing in a range of conditions, it does best in an alkaline soil. The ideal pH level is around 7.5. If your soil is overly acidic, a dolomitic or agricultural lime can be used to raise the pH level.

Planting Your Redbud Tree

Use a robust shovel to dig a large hole. This should be at least as 3 times as wide as the plant’s root ball. When positioned in the hole, the root ball should sit level with, or slightly above, ground level.

When you are happy with the size of the hole remove the redbud tree from its protective burlap wrap or container. If the root ball is compacted, gently rub the roots. This loosens and uncurls the outer roots.

Position the plant in the hole. Remember it should stand as straight as possible and the top of the root system should be level with, or slightly above, ground level.

After positioning your plant, begin to backfill the hole. You may need someone to hold the plant in place as you do this.

When the hole is about half full, water the soil well. Allow the water to drain away before continuing to fill the hole. Gently firm the soil down and water thoroughly.

Place a layer of mulch, roughly 3 inches thick, around the tree. The mulch should not touch the bark. Mulching helps the soil to retain moisture and also keeps the root system cool.

Planting is also the ideal time to install a stake or some form of support. This helps to prevent the plant from snapping in strong winds. Young plants in particular are prone to snapping in the wind. The Dalen Tree Stake Kit is not only robust enough to support a growing plant it is also easy to install.

If you are planting more than one redbud tree, space them about 12 ft apart.

Caring for a Redbud Tree

Once planted the redbud tree is pleasingly low maintenance.

Remember to regularly weed around the base of the plant. Fast growing weeds can harvest nutrients and moisture from the soil, stunting the growth of other plants.

Water and Fertilizer

After planting, as the redbud establishes itself, try to keep the soil evenly moist. Don’t over water or allow the soil to become waterlogged.

Once established you only need to water the plant during dry spells, if the soil is drying out.

Younger plants in particular benefit from an application of organic fertilizer such as manure or compost. Work it into the soil around the base of the trunk.

Established or older plants can be given an annual dose of granular fertilizer in late fall after all the leaves have fallen. Alternatively you can fertilize in early spring before the bud breaks open. A multi or general purpose 10-10-10 balanced fertilizer is ideal.

Liquid fertilizers can be applied three or four times a year from late April until mid July. A balanced 20-20-20 mix is ideal.

How to Prune

Lightly prune the redbud tree every fall. This helps the plant to maintain a natural growth habit.

To prune, simply remove any old, dead or damaged branches.

When pruning, aim to open up the tree as much as possible. This enables air to circulate freely through the plant, helping to keep it healthy. Pay particular attention to the center of the plant that can often become overly compacted with entangled branches.

Always use clean, sharp garden shears to prune your plants. Remember to clean the shears before and after use.

Prune away damaged branches as soon as you notice them. This helps to prevent problems such as fungi, dieback and verticillium wilt.

Pruning is usually done during the winter months. However, this can deter spring blooming. Prune straight after flowering has finished if you don’t want to impair the flowering display.

Common Problems

Regularly inspect the plant for signs of fungal disease such as canker or wilt. Canker can cause foliage to yellow and branches to wilt.

Verticillium wilt is also a common issue. Again this causes foliage to lose color and wilt. Should either of these issues occur, prune away affected areas. Particularly diseased plants will need to be lifted and destroyed.

Pests such as scale can also be problematic. Sucking the fluid from the foliage, scale can cause leaves to yellow, wilt and fall from the plant. An insecticidal soap or  horticultural oil can be used to cure infestations. Alternatively encourage or release natural predators onto your plants. Both predatory lacewings and parasitic wasps target scale bugs.

The redbud tree can also fall victim to rabbit or mouse damage. Covering the lower part of the trunk, from the ground to about 2 and a half foot high, with a cloth or mesh, such as Amagabeli Hardware Cloth protects it from most pests.

How to Propagate a Redbud Tree

The redbud tree can be easily propagated by seeds or cuttings.

Propagation via Cuttings

Cuttings are best taken from young plants or branches, known as softwood. Cuttings from mature trees are more difficult to root.

Take your cuttings in late spring or early summer after the flowers have faded and leaves have formed. Each cutting should be about 4 to 6 inches long. It should be free of buds or flowers. Use a sharp, clean garden scissors or knife to make clean cuts.

Don’t take cuttings from the main stem. Instead, cuttings should be taken from young or softwood branches that are bud and flower free. 

Strip away leaves from the lower part of the cutting before coating it in rooting hormone. This encourages roots to emerge.

Fill a 6 inch pot with a mixture of equal parts milled peat and coarse sand or perlite. Wet the mixture and allow excess moisture to drain away. Make a hole in the center of the pot and insert the cutting. Firm the soil mix around the cutting to hold it in place.

Place the cuttings somewhere safe, like in a greenhouse. The temperature around the cuttings should average around 70 ℉ during the day. If daytime temperatures regularly fall below 65 ℉ place the cuttings in a heated propagator. Heated propagators, such as the Super Sprouter Propagation Kit, allow you to maintain the ideal temperature and humidity levels around seeds or cuttings.

Mist the cuttings twice a day to ensure that the stem and leaves don’t dry out.

Gently water the soil when the top 3 inches or so feels dry.

After about 4 weeks gently pull the cutting. If you feel resistance, this means that roots are forming. The cutting can now be transplanted into a 10 inch container filled with garden or general purpose potting soil. 

Slowly acclimatize the cuttings to their desired final position. Remember to provide shade during the warmest parts of the summer. During this period, don’t allow the soil to dry out. You may need to apply about 1 inch of water a week.

Once the hottest part of summer has passed the cuttings can be planted out as described above.

Growing from Seed

As the flowers fade, seed pods will emerge. These are similar in appearance to pea pods. The seed pods can either be eaten or harvested to grow a new redbud tree.

Each pod contains four to ten flat, round seeds. Mature seed pods are brown and papery. Once mature harvest the seed pods. This is usually done in the fall. However the pods can remain on the plant during the winter.

Store harvested seeds in a sealed jar in the refrigerator. Keep them in this condition until early to mid February.

Remove the seeds and rub them with a piece of sandpaper to remove the tough outer layer. This encourages germination. You can also soften the seeds by soaking them in warm water. Allow the seeds to soak for about 4 days.

Plant each seed about a quarter of an inch deep in a small pot filled with potting soil or moist sand.

Place the pots in a cool place, such as the refrigerator, unheated shed or garage for 5 to 8 weeks. This replicates the cold weather necessary for germination to occur. After 8 weeks place the seeds outside and allow them to germinate.

In colder areas there is no need for the artificial chill period. Simply sow the seeds and place the pots outside. If you are sowing the seeds outside, remember to protect them from seed loving pests.

Once the first set of heart shaped leaves has formed you can plant on in their permanent location.

An elegant, eye-catching addition to any garden, the redbud tree is a popular and easy to care for ornamental plant. 

Elegant and attractive, the redbud tree is an ideal addition to the garden. Easy to care for and pleasingly adaptable, the plants require little regular maintenance making them a reliable addition to a shrubbery or floral border. They are also suited to smaller or compact spaces. This versatility means that almost anybody can enjoy the burst of early spring color that the redbud tree brings.

Best Redbud Tree Guide - How to Plant and Grow Redbud Trees

If you spot lavender-pink flowers clustered on bare tree branches in early spring, you've probably stumbled upon a lovely redbud tree! This flowering tree (just like the mighty magnolia tree), native to woodland areas, has exquisite sweet pea-like flowers that last for weeks before their pretty heart-shaped leaves appear. Pollinators love redbuds because they’re one of the first trees to bloom in early- to mid-spring. They even display bright colors come fall! Best of all, they’re tough little trees that will work in any garden and look beautiful as part of your landscaping ideas. Plus, they always bring a smile to Ree Drummond's face. She absolutely loves them! "If you love purple, the short time when Oklahoma Redbuds are blooming is like being in a dream," she says. If you were hoping to learn how to plant redbuds in your yard, there's good news ahead for you.

"Redbuds are very adaptable," says Nancy Buley, communications director for J. Frank Schmidt & Son, Company, wholesale tree growers in Oregon. “They grow from Massachusetts to Florida and Texas to Minnesota, with more cold-hardy cultivars—or cultivated varieties—having developed in recent years.”

But before you plant one of these gorgeous trees in your own garden, there are a few things you need to know about how to care for a redbud tree! Read on for a total redbud tree guide ahead, including information about redbud varieties, planting tips, maintenance, and more.

What types of redbud trees are there?

There are many different varieties of redbud trees, so make sure you choose one that's suited for winters in your USDA hardiness zone. You can buy online or at a local nursery, where you’ll find both single trunk and multi-stem varieties, the latter of which have a shrubbier appearance.

Gizelka//Getty Images

Here are a few outstanding types of redbud trees you might want to check out:

  • Appalachian Red Redbud Trees: Show off bright rosy-red flowers.
    • Oklahoma Redbud Trees: Have pink flowers and then glossy green leaves.
      • Merlot Redbud Trees: Boast pink flowers that turn into wine-red foliage later.
        • Flame Thrower Redbud Trees: Have pink flowers and red foliage that fades to yellow and green.
          • Lavender Twist Redbud Trees: A weeping variety with pink flowers.

            How do I plant redbud trees?

            Find a spot for your redbud tree that gets six or more hours per day of full sun exposure. Most varieties will grow about 20 feet tall by 25 feet wide, so make sure your tree will have plenty of room to spread its branches out. Watch out for low rooflines or wires before planting too. Redbud trees are considered moderate growers and can reach about 10 feet in five to six years.

            When planting, dig a hole about two- to three-times as wide as the container it came in.

            Stainless Steel Shovel

            Stainless Steel Shovel

            $70 at Amazon

            Credit: Amazon

            Don’t add anything such as peat moss or potting soil to the hole. This old-school planting practice is no longer recommended because studies have shown that it may cause drainage problems and encourage the roots to stay in the hole instead of spreading out into the surrounding soil. Ultimately, your plant has to grow in its native soil so it can be nice and strong.

            Next, gently tip the tree out of its container—or remove burlap, twine, or wires if it’s a balled and burlapped tree (burlap won’t biodegrade quickly so you have to remove it). Use your hand to rough up the surface of the root ball or use a pruner to snip any tree roots that are circling around it. This part necessary as it stimulates the roots to grow, says Buley.

            Finally, you'll want to place your tree in the hole at the same height it was in the container. “The biggest mistake is planting too deep,” says Buley. “Make sure the tree’s root flare, where the base widens slightly, is above ground.” Refill the hole with soil, gently tamp down, and water it well.

            How do I care for redbud trees?

            Help your tree get established by watering it deeply for the first few years, especially during droughts. Most new trees need about 15 gallons a week! “It’s better to water deeply and infrequently than give it a daily squirt because that encourages roots to stay near the surface,” says Buley.

            It’s also a good idea to add a two- to three-inch deep layer of mulch around the base to retain moisture and keep down weeds. However, you'll need to pull the mulch away from the tree trunk and spread it so it looks more like a donut, rather than a volcano. “Volcano mulching,” or mulch placed right up against the trunk, encourages decay and could invite pests and disease.

            You'll be pleased to hear that pruning isn’t necessary for a redbud tree because it keeps its shapely form naturally. That being said, it’s fine to trim off any broken or crossing branches. Otherwise, all you have to do is enjoy this beautiful springtime bloomer!

            Shop Different Types of Redbud Trees to Plant in Your Garden
            Oklahoma Redbud

            $180 at

            Credit: Fast Growing Trees
            Merlot Redbud Tree

            $160 at

            Credit: The Tree Center
            Lavender Twist

            $80 at

            Credit: Spring Hill Nursery
            Forest Pansy Redbud

            $80 at

            Credit: Nature Hills

            Arricca SanSone

            Arricca SanSone writes for CountryLiving. com,, Family Circle,, Cooking Light,, and many others. She’s passionate about gardening, baking, reading, Polish pottery, vintage cookbooks, and spending time with the people and dogs she loves.

            This content is imported from OpenWeb. You may be able to find the same content in another format, or you may be able to find more information, at their web site.

            How to keep the beauty of wooden furniture: basic care

            Natural wood furniture has a special appeal. Natural colors in the interior of a home or office, the original texture of this material evoke pleasant emotions in people. Regular care helps to enjoy all the benefits of such products for as long as possible. We offer expert advice that will help you understand how to properly care for wooden furniture.

            Basic care

            When deciding how to take care of wooden furniture, properly care for it, first of all, you should pay attention to what kind of "climate" it is in. The temperature and humidity of the air in the room directly affect the condition of the wood. Optimal temperature indicators are not lower than +15◦С and not higher than + 25◦С, humidity is not more than 65%.

            "To avoid overheating, do not place furniture next to heating appliances: the distance should be at least half a meter."

            If the room is too dry, you can solve the problem by installing an aquarium or a large vase of water.

            It is also important to ensure that the wood furniture is exposed to direct sunlight as little as possible. To do this, you can hang curtains on the windows. In addition, wax will protect unpolished wood from exposure to ultraviolet radiation. It is carefully rubbed into the surface. To protect against grinder bugs in the summer, it is recommended to rub the legs of wooden furniture with turpentine.

            “When treating wood surfaces, experts recommend using only products specially designed for this purpose. They contain natural oils of flax and olive, as well as other ingredients that help cleanse and preserve wood.

            How to clean wood surfaces?

            Wipe the surface of wooden furniture with wax and vegetable oil using wet or dry soft cloths or suede. At the same time, it is necessary to make movements in the direction of the wood pattern: this helps to remove dirt from the pores. It's best to do this every week.

            And one more important piece of advice: if the furniture gets wet, you need to wipe it off immediately so that moisture does not penetrate into the solid wood through the seams.

            In addition, it is worth protecting furniture from impacts. To do this, put it so that the door does not touch it when opening. You can use rubber suction cups that will serve as a shock absorber between the door and the furniture.

            And every year it is recommended to check whether the fasteners are well tightened, if necessary, tighten them. This will protect the structure from deformation and the tree in the areas near the fasteners from destruction. It is also important to ensure that the furniture is on a flat floor, avoiding distortion of its elements. This will help keep the interiors in great shape.

            Monthly maintenance of natural wood furniture

            To keep natural wood furniture in excellent condition, it is necessary to carry out simple maintenance regularly.

            • Dry clean wooden furniture every month using a vacuum cleaner with a soft brush attachment.
            • Wipe surfaces with a cloth dampened in water or solution. Wet wipes are not suitable for this. They may contain substances harmful to natural wood.
            • If scratches or other small imperfections occur, use a special masking putty in a suitable shade for masking.
            • At least once a month, it is recommended to wipe the furniture with special antistatic agents using a soft cloth.

            If you take good care of wood furniture, it will delight you with its beautiful appearance for a long time.

            Care products

            Wood furniture care products must meet certain criteria. Their feature is that they do not contain solvents, ammonia, silicone and acetone. Do not use products with abrasive properties. Washing powders and soap are also contraindicated.

            The best option is products with beeswax, linseed and olive oils. To care for wooden furniture, you need to choose high-quality oil.

            “There are many ready-made compositions on the market today that are intended for the care of furniture made of unpolished and polished wood. They usually contain vegetable oil."

            Can I use a cloth? How to care for wood? The products are applied with a clean soft cloth or napkin: this helps to prevent scratches on wooden furniture. It is for this reason that hard sponges should not be used to remove stains and polish wood.

            Removing dirt

            How to clean wooden furniture when dirt appears? The answer to this question depends on what exactly caused the stains: mold, water, hot dishes, grease, and so on.

            • Water stains on furniture are removed by rubbing with a walnut kernel. A film is formed. When it dries, rub the area with a soft cloth.
            • Drops of wax are removed with a knife preheated under running hot water. The remaining particles can be wiped off the surface of wooden furniture by soaking a napkin in gasoline.
            • Mold can be easily removed with petrol.
            • To remove iodine stains from furniture, rub it with a piece of raw potato.
            • Grease stains are rubbed with talcum powder, the remnants of which are then brushed off with a dry cloth.
            • To remove fingerprints from polished furniture, wipe the stained area with a raw potato.

            How do I remove stains from hot dishes?

            Hot dish stains on lacquered furniture can be removed with paraffin wax. Cover the affected area with paraffin, previously melted, then cover it with a piece of cloth - and iron it with a warm iron. If the furniture is stained and varnished, table salt will help. It is applied to a cotton swab, which is then dipped in vegetable oil, and the stain is rubbed until it disappears completely. Another way to remove stains from a hot object on varnished wood is to erase them with an eraser, and then wipe the surface with a polish.

            Traditional care

            There are many traditional ways to care for wooden furniture.

            • To give it a nice sheen, you can use a mixture in which one part (tablespoon) of linseed oil or olive oil, two parts each of vinegar solution (2 tablespoons) and lemon juice (2 tablespoons). Everything is mixed and applied to wooden interior items with a soft cloth cloth slightly moistened with a solution.
            • Tea leaves are also used for polishing. It is wrapped in a cloth and then rubbed with such a swab on the surface.
            • If stains appear on the furniture, you can treat them with petroleum jelly. It is left overnight, and then the surface is wiped with a sponge or soft cloth.
            • If polished furniture is wiped with a damp cloth, then take a dry cloth and dry the surface, otherwise it will leave ugly stains.
            • When stains on polished furniture are old, they are smeared with a mixture of olive oil and salt with a cloth, leaving for three hours. After the salt dries, it is removed and the area is wiped with a woolen cloth.
            • Small scratches on mahogany, oak and walnut furniture can be hidden by applying a weak solution of iodine. It is important to add very little iodine to the water, otherwise it will leave traces on the wood.

            How to refresh wooden furniture?

            Oak furniture is easily cleaned with a warm, boiled mixture of beer (1 glass), a teaspoon of sugar, to which a little wax is added. A swab is moistened in this solution, with which the composition is applied to the surface and rubbed with a napkin, as well as a sponge coated with a soft cloth.

            Mahogany furniture helps refresh wood furniture burdock oil. You need to moisten a cloth and squeeze it well, then wipe the surface. Excess liquid should be removed immediately.

            Furniture painted white will look like new if it is wiped with a damp cloth and then rubbed with toothpowder mixed with water and a small amount of laundry blue.

            "With careful attention and regular maintenance of wooden furniture, you can not worry that it will suffer from excessive humidity or dryness of the air, from parasites or sunlight."

            Our experts will be happy to help you better understand how to care for wooden furniture, which wood care oil to choose and how to choose professional products.
            Ask questions and leave comments in the PM on the website of the online store.

            How to care for wooden furniture?

            In order for the beauty and neatness of wood to please the owners, you need to know how to care for solid wood furniture during cleaning and operation. In the article we will talk about the correct temperature and humidity ranges in rooms, what means to use to clean the surfaces of cases and facades. We will give folk recipes for maintenance, restoration of minor damage.

            Rules for the care of natural wood

            Heat, direct ultraviolet dry the wood, which causes cracks. Plus, the sun contributes to the fading of the coating, and the water - swelling, warping. Recommendations from furniture manufacturers will help prevent this.

            How to take care of wooden furniture - arrangement

            The correct arrangement of wood items is a 50% guarantee that the headsets will last a long time without a major restoration:

            1. place wardrobes, chests of drawers, sideboards, tables and chairs in spacious rooms with good natural or forced ventilation;

            2. keep temperature below +15°C, control humidity at 45-65%;

            3. if the furniture is wet, cover with polyethylene - slow drying will save from deformation;

            4. keep a distance of 1 m from radiators and 50 cm from convectors;

            5. darken windows with blackout curtains or blinds on bright sunny days;

            6. do not use force to open doors, pull out drawers;

            7. entrust the assembly to furniture specialists - the cases will retain their geometry, the mechanisms will work correctly, the gaps between the facades will remain unchanged.

            How to care for solid wood furniture - 3 key cleaning tips

            There are three main rules for proper care of wooden surfaces:

            1. use soft fabrics - flannel, velvet, suede and do not use cotton cloths, napkins, as they leave lint;

            2. clean facades, carcass panels in the direction of the drawing - this is how dirt is removed from the pores of the wood;

            3. The main component of cleaning compositions is vegetable oil, it impregnates the outer layers of wood and gives moisture resistance, retains color.

            How to care for wooden furniture - 3 tips for choosing store-bought products

            In stores, you need to pay attention to the components that make up the products for wood care sold:

            1. silicone substances age the wood

            2. acetone, solvents damage varnish, polish;

            3. abrasives scratch the surface.

            Choose formulations containing beeswax, burdock or olive (linseed) oils. Wax products create a protective film, fill microcracks.

            How to care for wooden furniture - 8 folk recipes

            Universal industrial chemistry does not take into account wood species and formulas for specific enamels, varnishes, and impregnations. The components included in the cleaning agent (substances, fragrances) can cause allergies. To keep headsets, solid facades in order will help home compositions made of environmentally friendly materials, which are always at hand or you can stock them up in advance:

            1. Combine vegetable oil and lemon juice 2:1. Apply the mixture with one napkin, wipe dry with the other.

            2. In ¼ cup vinegar (9%), pour 1 tsp. burdock oil. Wipe the surfaces with the solution, then remove the excess with a soft cloth.

            3. Grated wax with turpentine will polish, additionally protect the varnish layer - 50 and 140 g, respectively.

            4. Furniture without lacquer, enamel will protect against mechanical damage and moisture composition of equal parts of melted wax, walnut and linseed oils. For scent, add 1-2 drops of citrus essential oil.

            5. Wipe outdoor furniture with a solution of 1 cup machine mineral oil and a teaspoon of lemon.

            6. Impurities are perfectly removed with 10 ml of ammonia diluted with 60 ml of water.

            7. Sauerkraut brine, raw potatoes, vinegar will cope with various stains.

            8. Metal fittings will shine if 30 g of ammonia and 15 g of lime (chalk, tooth powder) are added to 50 g of water.

            16 tips for caring for solid wood furniture

            Wood is an eternal material, but its care must be constant. When applying means, it is necessary to take into account coatings, wood species, type of pollution.

            Lacquer is afraid of soap solutions, polishing - wet rags. Wooden surfaces without protective layers (only impregnation) cannot be sprayed with polish, greasy stains will remain. It is enough to wipe them with a cloth moistened with soapy water and then wipe dry. Lacquered furniture “loves” cleaning with a school eraser: circles from hot plates and cups disappear. Kerosene is a lifesaver of polished sets from dirt, including old ones.

            Freshness, brightness of color will return the composition of water, blue, tooth powder to white furniture. A napkin moistened with infused tea will give natural shades of aged furniture items.

            The trace of hot dishes will become invisible after vaseline left overnight. In the morning, just polish the surface. The second method is to leave a mixture of the same amount of salt and vegetable oil for several hours, then wipe it with a dry sponge. The third option is to rub the print with paraffin, iron it through gauze with a warm iron, and polish it with a hard cloth.

            A few short tips:

            1. mold removes gasoline;

            2. stains from wet objects are smeared with walnuts, after half an hour the film is rubbed with a cotton cloth;

            3. raw potatoes will remove iodine drops, fingerprints;

            4. stubborn dirt from pine will soften with lemon oil;

            5. glossy oak after treatment with a solution of beer, sugar, a piece of candle;

            6. nut likes red wine and olive oil beauty treatment 1:1;

            7. water stains from the varnish will be removed by flour, then cleaned with burdock oil.

              Learn more