How to wrap a tree in fairy lights


How to Wrap Trees With Outdoor Lights

By

Lisa Hallett Taylor

Lisa Hallett Taylor

Lisa Hallett Taylor is an expert in architecture and landscape design who has written more than 1,000 articles about pool, patio, garden, and home improvement over 12 years. She has a bachelor's degree in Environmental Design and is certified in fine and decorative arts appraisal.

Learn more about The Spruce's Editorial Process

Updated on 10/20/22

Reviewed by

Larry Campbell

Reviewed by Larry Campbell

Larry Campbell is an electrical contractor with 36 years of experience in residential and light commercial electrical wiring. He worked as an electronic technician and later an engineer for the IBM Corp. is a member of The Spruce Home Improvement Review Board.

Learn more about The Spruce's Review Board

The Spruce / Nanor Zinzalian

In This Article

  • Tips for Hanging Tree Lights

  • Frequently Asked Questions

Project Overview

Trees decorated with light strings always look festive for the holidays, and they can be just as fun and magical any other time of the year. During warm weather, there's nothing more inviting than a comfortable outdoor space bejeweled with twinkling lights.

Lighting is suitable for most types of trees, including evergreens, deciduous trees, palm trees, and even yucca. Often, bare leafless trees provide the ideal framework for hanging lights, especially horizontal-spreading varieties. Palm tree trunks wrapped with white or red lights show off their vertical, upright forms, drawing the eye upward toward the night sky.

The best outdoor lights to use are LED lights. LEDs are not only 75 percent more energy-efficient than standard incandescent bulbs, they also last many times longer. LED lights cost quite a bit more than incandescent, but because LEDs cost less to run, they pay for themselves long before they burn out.

The 11 Best Outdoor Solar Lights of 2022 | Tested by The Spruce

For the color of the lights, warm white LEDs provide a nice, warm glow reminiscent of the incandescents that everyone loves (and with which so many traditionalists have trouble parting). Cool white offers a bluish glow, and colored lights are either multicolored or one color. White is universal and is suitable for any time of the year. Colored lights usually are best for the holidays. In any case, it looks best if you choose the same lights in each color, such as all warm or all cool whites.

Watch Now: How to Wrap Trees With Outdoor Lights

Equipment / Tools

  • Ladder
  • Outdoor-rated extension cord
  • Cardboard (optional)

Materials

  • Outdoor light strands
  • Twine or plant tape (optional)
  1. Choose the Trees for Lighting

    Select the tree or trees you would like to light up. Start with one that creates a natural focal point in your landscape. Ideally, it will also have an interesting form and elegant branches that will look especially striking when illuminated. Odd shapes of branches and limbs can become magical in the evening when electrified with twinkling lights.

    A very large tree can have a lot of "wow" factor, but the bigger (and taller) it is, the more lights it will need. What you don't want is a big tree that is sparsely lighted, so choose the right size for the amount of lights you have or are willing to buy.

    The Spruce / Nanor Zinzalian

  2. Test the Light Strands

    Test each strand of lights by plugging it in and making sure all of the lights are working. It's important to do this before hanging the lights, especially if you won't have the lights on while you work. You don't want to put up all of the lights only to discover that a strand in the middle is on the fritz.

    If desired, connect multiple light strings (after testing them) by plugging them together end-to-end. Wind the resulting long string around a flat piece of cardboard. This makes it easy to handle a long string without having to fight a tangled mess.

    The Spruce / Nanor Zinzalian

  3. Lay Out the Cord

    Extend an outdoor-rated extension cord to the base of the tree. Because the cord will be outdoors and may get wet, it must have GFCI (ground-fault circuit-interrupter) protection to protect against shock hazards. To ensure protection, plug the cord into a GFCI outlet or use a GFCI-protected outdoor cord.

    Decide where the visible base of the tree is—this is the point where the tree becomes visible from the street or from the house. In addition, tall grasses, rocks, and other landscaping features might cover or obscure the very bottom of the trunk. Walk to the curb or out to the street, and make a mental note as to where the trunk is visible. Position the cord end at this point. If desired, you can wrap the cord around the base of the tree to secure it.

    Plug the first strand of lights into the extension cord. You can plug the cord into the outlet, if desired, or wait until you're finished.

    The Spruce / Nanor Zinzalian

    Choosing a Safe Electrical Extension Cord

  4. Wind Up the Trunk

    Begin wrapping the lights around the tree's trunk, moving upward with each winding. To ensure even spacing, check the distance between windings with your hand. Use about four fingers to get consistent spacing between each wrap around the tree trunk. Aim for uniform spacing to make the finished project look its best.

    The Spruce / Nanor Zinzalian

  5. Run Up and Down the Limbs

    Wrap the lights up each limb or large branch, making sure you have several extra feet of string. Space the wraps about two hands (eight fingers) apart. When you reach the end of the limb, reverse direction and wind the string back down, winding between the upward wraps so that the resulting spacing is one hand width.

    The Spruce / Nanor Zinzalian

  6. Use a Ladder

    Use a ladder to reach high areas. Never climb a tree to hang lights. You can use a freestanding stepladder for relatively low heights, but for higher areas, use an extension ladder. Always follow standard ladder safety procedures, making sure the ladder is evenly supported at the top and bottom and that it angles at about 75 degrees (15 degrees from vertical). If you need to climb more than about 6 feet high, have a helper hold the base of the ladder and to "spot" the lighting from the ground while you're up on the ladder.

    The Spruce / Nanor Zinzalian

  7. Secure the String

    Secure the end of the light string, as needed, to complete the installation. You can simply tuck the end into a crook of branches to keep it from coming loose, or you can tie the string to the tree with a piece of natural twine or planting tape. Don't use metal wire, which could create a shock or fire hazard if the metal cuts through the light's wire insulation. You can also use a plastic zip tie, as long as you remember to cut it off before long. A strong zip tie could girdle the tree and cause damage if it's not removed.

    The Spruce / Nanor Zinzalian

When determining how many lights or strands of lights to use, don't follow the old saying, "A little goes a long way." It just doesn't apply in this case. Depending on the circumference of the trunk, each wrap can easily use up 20 or 30 lights. And a tree that is wrapped only partway up its trunk simply does not look festive or complete. Plan and budget for lights accordingly. You can always start small and add more lights each year.

Wrap Lights on an Outdoor Tree in 6 Easy Steps ⋆ Love Our Real Life

Lights on outdoor trees give a warm and cozy feeling! Whether it's for outdoor Christmas decorations or simply to give an outdoor space better ambience.

Check out my 6 easy steps to wrap lights on an outdoor tree to decorate for Christmas or to dress up an outdoor patio!

Get more ideas for improving outdoor spaces here.

Outdoor tree lighting can add a beautiful focal point to your backyard. If your landscape lights are minimal, wrapping trunks of outdoor trees (as well as branches of the trees) with fairy lights is a fun and inexpensive way to illuminate your yard and outdoor space.

The warm glow of lights on trees doesn't have to be reserved for Christmas! This is a great way to spotlight a beautiful tree in your backyard for summer enjoyment too.

Get Exclusive Tips to Create a Home You Deserve

First Name Email Address

By subscribing, I consent to receiving emails.

We have a neighbor that beautifully wraps several trees in her yard each year for Christmas. When I say she wraps lights on her trees, I mean she carefully wraps the trunk and most of the branches for an amazing show!

I've intended to do the same for many years without success as I was no fool to how much work would be involved. However, this year I actually did it.

Well, kind of. I wrapped one small tree. BUT, I love it.

The key to this process is patience. Having just completed this little project myself, I do have some insight you might benefit from. I will not claim to be an expert, but I do have some tips you can use.

This post contains affiliate links. Please see my full disclosure policy for details.

MATERIALS NEEDED:
  • Clear indoor /outdoor heavy duty lights
  • Zip Ties (optional)
  • Outdoor Extension cord (optional)
  • a healthy dose of patience

Kind of kidding about requiring patience, kind of not!

This little tree took me around 2 ½ hours to wrap. Keep in mind this was my first time doing anything more than just throwing lights up and calling it a day.

I typically love to live my life by the "good enough" motto, but I really wanted to make an exception with this little tree.

6 EASY STEPS TO WRAP LIGHTS ON AN OUTDOOR TREE:

1. Determine the tree(s) you want to have lights.

This particular project is not the same as putting lights on your Christmas tree as I selected a tree that as I selected a tree that would allow you to appreciate the shape of the tree branches.

We have this small, multi-stem trunked maple tree that I really wanted to use. My husband refers to it as our weed, because it is typically growing wildly unruly.

But, it is close to an outdoor electric outlet, small, and I like the general shape of the tree. It was the winner!

Tips for selecting a tree:

  • If lights will be left on year round, avoid selecting a tree that is not mature.
  • Be aware of how the base of the tree will appear once highlighted with lights.
  • Is the tree convenient to a power source?
  • Will you want lights to reach the top of the tree or just a portion of the way up? Larger trees require a LOT more lights plus can present a challenge when wrapping.
  • Do you like the symmetry of the tree? Lights will highlight the shape of the tree, so be sure you appreciate how it will look once illuminated in your landscape design.
  • Think about the types of trees, evergreens vs. deciduous? Deciduous trees will not have leaves during winter and will look much different with lights when they get their leaves in the spring.

My golden doodle, Bentley photobombed the above picture! He loves a good project.

2. Determine how many lights you will need.

I found two 400-light strands on clearance after Christmas last year. It required ALL of the lights (800) for my small tree.

My plan was to just wrap as much as I could.

The strand you get will let you know how many you can safely connect together.

The best outdoor lights to use for your trees, especially if you intend to leave up year-round are LED lights. These are more energy-efficient and can better withstand the outdoor elements.

Many of the outdoor LED lights are solar powered. They do have a battery pack as well.

PRO TIP: A quick tip is to pick a reasonably warm day. I was lucky enough to find a day that my hands didn't get cold and no gloves would be needed. That would not have feen fun!

As I'm typing this post, we have at least a couple inches of snow on the ground. Brrrr!

3. Start wrapping from the bottom of the tree.

With the first strand of lights, ensure you have the male end (male plug) of the light strand accessible to plug into an outlet/power source.

My outlet is not super close, so I needed to use an outdoor extension cord to reach.

MORE TIPS

  • Smaller strands will be easier to manage! My 400 strand of lights was really challenging to get through small branches/spaces on our little tree.
  • It would be best to start with your lights wrapped in a ball shape to help you navigate around the tree trunk and branches more easily.
  • Having a helper will make the process faster.

4. Go around the Circumference of the tree trunk / branches systematically, wrapping tightly.

I did not feel the need to use any zip ties, but you could certainly do so if you felt there were areas the lights weren't as secure as you'd like.

The closer you space the lights, the more dramatic the end result will be! However, keep in mind this will mean using more lights!

If you will need to go back down a branch to connect with another, you will be able to space the lights further apart.

Also, try to pick limbs that you would consider the stronger branches so they can handle the weight of the mini lights. 

Keep in mind, you do not need to go all the way to the top of each branch!

I would suggest finding a reasonable height to stop with your lights and stay consistent with each branch. You will have a much more uniform look in the end.

5. Check your lights

Every little bit throughout the process, I plugged in my lights to get a better perspective of how it would look. This allowed me to make a few adjustments along the way.

You could also just leave the lights while you wrap them to give you a good idea of how they look.

It was starting to get darker when I was wrapping my tree and this helped me see exactly how the string lights were looking!

6. Admire your work and stop coveting your neighbor!

I love my sweet neighbor and love that she inspired me to try this myself. With a few tweaks, I think I can shave some serious time off when I do it again next year.

That's right. I said next year.

I'm a sucker for lights and I will definitely find time to do this again next season.

Did you see my post giving tips how to hang outdoor string lights? This post gives great tips for hanging hanging string lights on a deck, pergola, gazebo, fence, etc!

We love them and use them every chance we get. Lights add so much ambiance for outdoor dining or just hanging out on the patio without a big price tag. As does fire!

You also can see our fire pit in the below image. Here are some tips if you are searching for the perfect fire pit or fire bowl for your outdoor space.

Get the full deck and patio before and after makeover. It's crazy what a change this project has made for how we use our home.

I'm on the lookout for a tree in my backyard that I can leave lights on year-round, too! I feel a bit like a tween with my string light obsession;-)

But, I bet you'll love them too!

Thanks for stopping by Love Our Real Life today. I hope I've inspired you to add a little light to your life (pun intended!). Now, go wrap lights on an outdoor tree at your home!

Have a great week!

Be sure to save this post to Pinterest or share on FaceBook so you can find it later!

How to hang a garland on a Christmas tree beautifully: indoors and outdoors, step-by-step instructions, diagrams and videos

Decorating a Christmas tree is an important moment that not only children, but also adults are waiting for. Packages with toys and tinsel are taken out, beautiful balls are hung, perhaps some decorations are even made by hand. But the Christmas tree must sparkle and shine, and this requires LED lights. How best to hang a garland on a Christmas tree is described in this article.

Decorating the Christmas tree correctly: garland or toys first?

It is much more convenient to decorate the Christmas tree in the following order:

  1. First of all, lights are placed on the Christmas tree. Beforehand, it is recommended to lay out the garland on the floor and check the operation of the light bulbs, then distribute it on the tree.
  2. Only after that you can hang toys on the branches: balls, bells, houses, etc. Since the bulbs are already on the tree, you can assemble a composition that matches the color. For example, hang a golden bow near the red light. When all the decorations are on the tree, you need to make sure once again that they are evenly distributed and securely fastened to the branches.
  3. At the end of the decoration, artificial snow can be spread on the ends of the paws, and the entire Christmas tree can be decorated with rain, beads and tinsel.

See also: DIY Christmas decorations

Reasons why it is better to hang an electric garland on the Christmas tree in the first place:

  • Without additional decorations, the wire is easy to lead to the outlet.
  • You can turn on the lights, check their work, see how beautifully they are distributed among the branches. In which case, the garland is easy to remove and reposition.
  • Lights are easier to match with Christmas decorations so that they are in the right color scheme.

Do not forget about the design concept, which many are guided by in the process of preparing for the New Year holidays. If you want to achieve the effect of an inner glow on the tree, place the lights closer to the trunk, and then hang the rest of the decorations. The same applies to New Year's lighting with large bulbs - they need to be distributed on the Christmas tree in the first place. Designers prefer to hang small flashing LEDs on a Christmas tree already decorated with toys. A slight shimmer will give the Christmas tree a magical aura, and the lights will attract attention.

Hanging the lights on the Christmas tree before or after the toys - everyone decides for himself. The main thing is that the preparation for the New Year brings joy.

See also: Making garlands for the Christmas tree with your own hands

How to choose a garland?

Among the abundance of shimmering garlands presented in stores, it is difficult to make a choice. First, let's look at the main types of LED decorations:

  • Filamentous. Most often, it is with such lighting equipment that the Christmas tree and the room are decorated. They can be in the form of one long cord on which LED bulbs are located. Manufacturers also produce garlands in the form of a grid or fringe - it is convenient to hang them on windows and walls.
  • Street. To decorate the Christmas tree on the street, they use special transparent flexible garlands with LED bulbs, which are reliably protected from moisture.
  • LED strips. They are used not only as a New Year's decoration, but also for additional lighting in the room.

Manufacturers of New Year's lighting equipment recommend purchasing an LED decoration with 500 bulbs for a two-meter Christmas tree (their number is indicated on the package). If the tree is 30-50 cm taller, it is better to choose a garland with an additional 50-100 bulbs.

Classic Christmas decorations can glow with a yellowish dim light, and light bulbs often fail. Manufacturers have come up with and introduced many innovations so that the garlands work for a long time and decorate the Christmas tree with iridescent, multi-colored lights.

But do not forget that the garland can be dangerous to health and even life:

  • To avoid fire due to excessive heating of the bulbs, you should purchase a decoration with a power of no more than 65 watts.
  • Do not let children turn lights on and off by themselves.
  • Do not put strings with lights in glass bottles, despite the fact that such arrangements look very nice. Such decor can provoke an electric shock.

What to look for when buying LED garlands:

  1. The plug must be durable, made of quality material, not change its original shape.
  2. You can calculate the desired length of the decoration as follows: measure the height of the Christmas tree and buy an ornament three times longer in length.
  3. The wire that will be connected to the outlet must be at least 1. 5 m for a home Christmas tree, for street decor - 10 m or more.
  4. Light bulbs must be tightly fixed, not wobble, much less fall out of the sockets.
  5. The power supply must only be opened with a screwdriver or other special tools. It is better to look at the soldering of wires before buying a product.
  6. For a street Christmas tree, purchase special lighting equipment with additional protection against moisture. On the packaging, the manufacturer must indicate that the jewelry is intended for external use.
  7. Samples of good quality must be free from foreign, unpleasant odors.
  8. The purchased model must be certified, otherwise it is forbidden to use it to decorate the Christmas tree and the room.

The operation of the garland should be checked in the store, and at home it is undesirable to immediately plug it into the outlet. Give time for the bulbs to warm up to room temperature, only then proceed to the decor of the Christmas tree.

How to decorate a Christmas tree with a garland?

There are several secrets on how to hang the garland so that the lights look beautiful:

  1. The decoration is placed on the Christmas tree only after the tree is set upright. If the Christmas tree will stand in the corner, you need to think in advance which side of it should look more elegant.
  2. Before hanging a luminous decor, lay it out on the floor, check the operation of all the bulbs, connect it to the outlet to make sure that all the lights are working.
  3. It is more convenient to start hanging the decoration from above, evenly distributing the lights in a zigzag pattern over the branches. If the tree will be in the center of the room, start at the top and work your way around.
  4. If you place lights near the trunk of a tree, it will look magical and mysterious, but it is better not to use flickering light bulbs for this.
  5. A thin garland with monochrome lights can be wrapped around each branch, starting from the lower legs.

Is it possible to hang a garland on an artificial Christmas tree and how to do it correctly:

  • Artificial tree needs additional, warmer lighting. Instead of blue or silver light bulbs, decorate the artificial Christmas tree with gold, red, purple lights.
  • Any artificial Christmas tree can be decorated with a garland, but provided that the device is fully functional, there are no bare wires in it, and all bulbs are tightly held in cartridges.
  • If there is not enough cord to decorate the entire height of the Christmas tree, you do not need to remove the decorations and start over. Buy another copy and complete the decor to the end.

If the Christmas tree is in the house

Interior designers offer their own way to decorate the Christmas tree with a garland:

  • Enter the room and pay attention to where your eyes first turned. It is in this place that it is better to put a shiny and sparkling Christmas tree. In addition to the tree, you can decorate windows, stair railings, fireplaces, bookshelves, etc. with lights.
  • Come up with a style of New Year's decor, and only then choose decorations for it. Light bulbs are different: plain, multi-colored, with a warm yellowish tint, curly. For a classic style, it is better to choose traditional colored lights, and for a Scandinavian or eco-style, plain or white ones are suitable.
  • When choosing a decoration, consider not only the length, but also the width of the Christmas tree: the more fluffy it is, the longer the garland will be needed.

See also: Creating a Christmas tree from a garland on a wall or window with your own hands

The sequence of further actions:

  1. We check the health of the decoration before hanging it on the branches.
  2. Preparing a few extensions in case the cord is not enough to decorate the entire Christmas tree. Most garlands are made in such a way that it is possible to attach them to each other. But according to fire safety rules, it is impossible to insert a Christmas decoration with more than 500 lights into one wire.
  3. So that the decor does not get confused, it is more convenient to decorate the Christmas tree together. You can wind the cord into a ball, starting from the part opposite to the plug. So you will hold the decoration in one hand, and lay out the light bulbs on the branches with the other.
  4. Light up the lights to see what colors will be on the tree. Start hanging decor by choosing a pattern: zigzag, spiral, top-down, diagonal, vertical lines, etc.

How to hang a garland on a street tree?

Tips and tricks for decorating a street tree on your porch or backyard:

  • Better to use warm colors of lights: yellows, reds, purples.
  • The plug from the garland must reach the socket. If you cannot connect the decoration to electricity, choose garlands that run on batteries.
  • Buy LEDs that are waterproof. On the packaging, the manufacturer must indicate that the garland is allowed to be used outdoors.
  • You can purchase ready-made sets of New Year's lighting equipment, for example, 10 luminous threads 10 m long each. With this composition, you can easily decorate a street Christmas tree 5-10 m high.

To create a festive, magical mood in a country house or in the country, they often use special illumination from luminous bulbs. Not only a decorated street Christmas tree looks beautiful, but also a luminous roof, balcony railings, columns, windows from the outside, trees and shrubs.

Patterns

There are several ways to hang the decoration on Christmas tree branches:

  1. Start from the top, evenly distributing the bulbs over the lower legs in a spiral with a little sagging.
  2. To make it easier to hang toys later, the lights can be attached closer to the trunk.
  3. If the Christmas tree is in the center of the room, it is better to distribute the luminous decoration in a circle.
  4. On the tree, which will be located in the corner of the room, the garland is hung on the branches in a zigzag pattern.
  5. It is permissible to start decorating the Christmas tree from the lower branches, in tiers, as if obliquely, or on top with a serpentine.

There are no clear instructions on how to hang garlands, except for basic fire safety rules. If you want to make the Christmas tree sparkling, use several garlands. Hang decorations in a zigzag, top-down or vice versa, wrap branches in a spiral or decorate in any other way. The main thing is that the creation of New Year's decor brings joy and cheers up.

See also: How and what to choose a Christmas tree for the New Year?

Tips on how to decorate a Christmas tree beautifully and stylishly

Every year we face the issue of decorating a beautiful New Year and Christmas tree. Every year everyone buys new garlands, balls, stars, tops to bring some novelty to the design. How to choose these attributes so that it turns out harmoniously.

Content

  • Color combination
  • Toys
  • What would be appropriate to decorate a Christmas tree in 2021
  • Not only the decoration of the Christmas tree is important, but also the decoration of its stand

Color combination

where it is planned to be installed. Suppose the room is dominated by textiles in yellow, then the tree should be decorated in more gold or yellow tones. However, no one forbids and combine colors. It is better to combine colors of the same depth and saturation.

A combination of three shades looks especially good. Blue-green colors, red-green-silver colors are very well combined with golden. If you want to dress up your Christmas tree in pastel colors, choose pale pink, light green or blue. The sophistication of the shades is given by garlands of lanterns that hang next to the toys and illuminate them.

If in doubt about the color combination, choose one of the following:

  • green with red,
  • red and white,
  • green - burgundy - gold,
  • blue - white - silver,
  • white - green,
  • pure white,
  • bright purple - blue - green,
  • ice blue - lilac - silver.

Toys

The position of the toys on the Christmas tree is of particular importance. Of course, all family members take part in this process: from young to old. First, a garland of lanterns should be placed on the Christmas tree, then larger balls are hung, gradually moving to smaller ones. It is not worth completely hanging the spruce, fluffy branches should be clearly visible.

An excellent addition to the purchased toys on the Christmas tree will be handmade toys. Such decoration brings not only joy, good luck and financial well-being to the house, but also remarkably cheers up.

Also, do not forget to place a figurine or figurine of the owner of the coming year on the Christmas tree. In 2021, it is the Ox.

The mood on New Year's holidays is created by fantasies, with the help of which we can decorate gifts, Christmas trees, rooms. However, it is recommended not to go far into them and do the design of the whole house in the same style: do not decorate different rooms in different colors and different attributes.

How appropriate to decorate a spruce in 2021

The symbol of 2021 is the Bull. He likes shades of white, gray, pearl . You can dilute it with blueberry or purple, add a little purple.

It is not necessary to decorate the Christmas tree in different styles, the Ox does not like this. On the beautiful lush greenery of the tree, you can use white - silver garlands, transparent, white, silver balls will do.

Toys are suggested to be used in approximately the same size. At the end of the composition, it is appropriate to decorate with shiny large tinsel or dense silver bows.

And, of course, what a Christmas tree without sweets. Hang sweets, cinnamon sticks on the forest guest - this will become an additional decoration, stylish and fragrant.

If your beauty has golden or orange tones, you can use citrus fruits like oranges to decorate. They can be wrapped in shiny bags or foil. You can diversify citrus figurines with cookies or gingerbread.

An excellent decoration of sweets will be multi-colored fudge, shiny sugar beads. Usually, sweets in the form of Christmas trees, snowmen or snowflakes are hung on the Christmas tree.

Walnuts are another interesting addition. Previously, they should be painted with gold or silver paint, and you can hang them on satin red or blue ribbons.

One of the traditions for wealth and financial well-being next year is to decorate the Christmas tree with banknotes and coins. Banknotes can be exchanged with your guests or simply given as a gift.

Not only the decoration of the Christmas tree is important, but also the decoration of its stand

The first option is a wicker basket. The basket can be woven from paper, and then painted in any shade. This would be a great decoration, perfect for the base of the Christmas tree.

The next option is decorative mats. Before the holiday, they are sold everywhere, but you can make them yourself. The shade should be selected to the prepared toys.

You can also decorate the base with a knitted blanket. To do this, a large-knit blanket is taken and placed around the Christmas tree.

You can take care of the design of the base a little in advance and order a wooden sled from the carpenter. This is a great attribute when installing a Christmas tree.

You can use a gift box or a skirt mat, use burlap, which you can get at the hardware store, and wrap it around the base.

The composition of the decoration can also be extended behind the Christmas tree, for this you should create a mini town or village at the base of the Christmas tree or arrange pillows in a chaotic position.

So, to summarize:

First. Decide on the size of the spruce: for a large room we take a large tree, for a small one - vice versa.

Second. First, garlands are hung on a tree, they are wrapped around the trunk, placed along the branches. Consideration should be given to the placement of toys. Do not forget about the rule that the more lights, the less other decorations.

Third. We take flashlights in the same style as the rest of the decorations. If the design of the spruce is monochromatic, then the lanterns should also be monochromatic.

Fourth. Choose the size of the toys according to the spruce. On tall trees, large balls are appropriate, or there should be a proportion: large from below, smaller and smaller towards the top.


Learn more